ThermoPro TP210B

ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer User Manual

Мадэль: TP210B

1. Уводзіны

Дзякуй за пакупкуasing the ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer. This device is designed to help you monitor the temperature of your refrigerator and freezer wirelessly, ensuring your food is stored at optimal temperatures. With a strong 500ft/150m wireless range and customizable alarms, you can easily keep track of temperature fluctuations.

2. Змесціва ўпакоўкі

  • 1 х прыёмнік
  • 1 х перадатчык
  • 2 x AAA Batteries (for Receiver)
  • 1 x USB Charging Cable (for Transmitter)
  • 1 х Кіраўніцтва карыстальніка

3. Асноўныя магчымасці

  • Пашыраны дыяпазон бесправадной сувязі: Up to 500ft/150m using advanced RF technology for stable connection.
  • Pre-Paired for Immediate Use: No complex setup required; units are pre-paired from the factory.
  • Шырокі дыяпазон вымярэнняў: Accurate readings within ±0.9°F across -40°F to 158°F (-40°C to 70°C).
  • Smart Temperature Alerts: Customizable high/low temperature limits with audio-visual alarms.
  • Easy-to-Read Backlit Display: Shows fridge and freezer readings, Max/Min records, and low-battery status.
  • Considerate Power Design: Receiver uses AAA batteries, transmitter features a rechargeable lithium battery.
  • Гнуткія варыянты размяшчэння: Receiver has hook, stand, or magnet; transmitter has clip or stand.

4. Настройка

4.1. Receiver Battery Installation

  1. Адкрыйце батарэйны адсек на задняй панэлі прыёмніка.
  2. Устаўце 2 батарэйкі тыпу ААА, сачыце за правільнай палярнасцю (+/-).
  3. Надзейна зачыніце батарэйны адсек.

Note: The receiver requires 2 AAA batteries, which are included in the package.

4.2. Зарадка перадатчыка

  1. Locate the charging port on the transmitter unit.
  2. Connect the provided USB charging cable to the transmitter and a standard USB power source (e.g., wall adapter, computer USB port).
  3. Allow the transmitter to charge fully before first use. The charging indicator will change when fully charged.

Note: The transmitter uses a rechargeable lithium battery designed for low-temperature environments.

4.3. Initial Pairing (Pre-Paired)

The ThermoPro TP210B units are pre-paired at the factory. Simply power on both the receiver and transmitter, and they should automatically connect. If connection issues occur, refer to the Troubleshooting section.

4.4. размяшчэнне

ThermoPro TP210B Receiver and Transmitter Units

Image: ThermoPro TP210B Receiver and Transmitter. The receiver displays temperatures, while the transmitter sends data from inside the appliance.

Размяшчэнне прымача:

  • Use the integrated stand to place it on a countertop.
  • Utilize the magnetic back to attach it to a metallic surface.
  • Hang it using the hook on the back.
  • Place the receiver in a location where you can easily view the display and hear alarms, within the 500ft/150m range of the transmitter.

Размяшчэнне перадатчыка:

  • Place the transmitter inside your refrigerator or freezer.
  • Use the integrated clip to attach it to a shelf or rack.
  • Ensure the transmitter is not obstructed by large items that could block the wireless signal.

5. Інструкцыя па эксплуатацыі

5.1. Уключэнне/выключэнне харчавання

  • Націсніце УЛАДА button on both the receiver and transmitter to turn them on or off.

5.2. Reading Temperatures

  • The receiver's backlit LCD display will show the current temperature from the transmitter.
  • The display typically shows both the current temperature and the all-time Max/Min records.

5.3. Устаноўка тэмпературных сігналаў трывогі

The TP210B allows you to set custom high and low temperature limits for alerts.

  1. Націсніце ПАВЯРЖЭННЕ button on the receiver. The high limit will flash.
  2. Выкарыстоўвайце UP or УНІЗ buttons to adjust the high temperature limit.
  3. Прэса ПАВЯРЖЭННЕ again to confirm the high limit and move to the low limit setting.
  4. Выкарыстоўвайце UP or УНІЗ buttons to adjust the low temperature limit.
  5. Прэса ПАВЯРЖЭННЕ a third time to confirm the low limit and exit alarm setting mode.

When the temperature exceeds the set range, the receiver will emit an audio-visual alarm.

5.4. Max/Min Temperature Records

  • The receiver automatically records the maximum and minimum temperatures detected since the last reset.
  • Націсніце МАКС/МІН button to cycle through current, maximum, and minimum temperature readings.
  • To reset the Max/Min records, press and hold the МАКС/МІН кнопку на працягу 3 секунд viewing the Max/Min display.

5.5. Падсвятленне

  • The receiver features a bright backlit display for easy reading in low-light conditions.
  • The backlight will activate automatically when a button is pressed and will turn off after a short period of inactivity to conserve battery.

6. Тэхнічнае абслугоўванне

6.1. Уборка

  • Wipe the units with a damp тканіна. Не апускаць у ваду.
  • Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.

6.2. Battery Replacement (Receiver)

  • When the low battery indicator appears on the receiver display, replace the 2 AAA batteries.
  • Ensure proper polarity when inserting new batteries.

6.3. Зарадка перадатчыка

  • Recharge the transmitter's lithium battery when the low battery indicator appears.
  • Выкарыстоўвайце USB-кабель для зарадкі.

6.4. Захоўванне

  • If storing the device for an extended period, remove the AAA batteries from the receiver.
  • Захоўваць у сухім месцы, удалечыні ад экстрэмальных тэмператур.

7. Выпраўленне непаладак

праблема Магчымая прычына Рашэнне
No temperature reading / "--" displayed Transmitter not powered on, out of range, or low battery.
  • Пераканайцеся, што і прыёмнік, і перадатчык уключаны.
  • Перамясціце прыёмнік бліжэй да перадатчыка.
  • Check and replace receiver batteries or recharge transmitter.
  • Re-pair units if necessary (power off both, then power on).
Няправільныя паказчыкі тэмпературы Sensor obstruction, extreme environmental conditions, or sensor malfunction.
  • Ensure the transmitter's sensor is not directly touching ice or walls.
  • Verify the temperature range of the device (-40°F to 158°F).
  • Звярніцеся ў службу падтрымкі, калі праблемы не знікнуць.
Сігналізацыя не гучыць Alarm limits not set correctly or alarm function disabled.
  • Review and adjust high/low alarm limits as per section 5.3.
  • Ensure the alarm icon is visible on the display.
Transmitter battery drains quickly Operating in extremely low temperatures or frequent signal transmission.
  • While the transmitter battery is designed for low temperatures, extreme cold can reduce battery life.
  • Ensure the transmitter is fully charged before deployment.
  • Калі праблема не знікне, звярніцеся ў службу падтрымкі.

8. Тэхнічныя характарыстыкі

  • Дыяпазон тэмператур: Ад -40°F да 158°F (ад -40°C да 70°C)
  • Дакладнасць тэмпературы: ± 0.9 ° F (± 0.5 ° C)
  • Бесправадны дыяпазон: Да 150 м (500 футаў) на адкрытым паветры
  • Частата перадачы: 433 МГц
  • Магутнасць прымача: 2 х ААА батарэек (у камплекце)
  • Магутнасць перадатчыка: Rechargeable Lithium battery (included, with USB charging cable)
  • Дысплей: LCD з падсветкай
  • Памеры (прыёмнік): Approximately 4.33 inches (length)
  • Вага (тавар): Прыкладна 11.2 унцыі

9. Гарантыя і падтрымка

ThermoPro provides a warranty for this product against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў.

Афіцыйны Webсайт: www.thermopro.com

Падтрымка кліентаў: Refer to the contact information provided on the ThermoPro webсайт або ўпакоўка прадукту.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.