HGLRC Wind5 Lite V2 FPV Racing Drone Frame Kit Instruction Manual

1. Уводзіны

The HGLRC Wind5 Lite V2 is a lightweight racing frame designed for FPV racing drone competitions. This instruction manual provides essential information for the assembly, maintenance, and optimal use of your frame kit. Please read this manual thoroughly before beginning assembly to ensure correct installation and safe operation.

2. Прадукт скончыўсяview

The Wind5 Lite V2 frame features a positive X structure with a 195mm wheelbase, optimized for agile flight performance and precise control. It is constructed from high-strength carbon fiber material and utilizes 7075 aviation-grade aluminum columns for enhanced durability and crash resistance. The frame includes arm protection bars to minimize damage during impacts.

Асноўныя функцыі ўключаюць у сябе:

• Лёгкі дызайн: Optimized for racing with a 195mm wheelbase.
• Трывалая канструкцыя: High-strength carbon fiber and 7075 aviation-grade aluminum columns.
• Arm Protection: Integrated arm protection bars reduce crash damage.
• Quick-Release Arms: Single-screw design for easy arm replacement and maintenance.
• Абарона кампанентаў: Custom aluminum standoffs protect camera and flight stack.
• Універсальны мантаж: Top plate includes 20x20*M3 holes for HDZero digital VTX.
• Аксэсуары ў камплекце: Simulated RHCP mini hammer antenna and non-slip battery strap.

3. Змесціва ўпакоўкі

Verify that all components listed below are present in your package. If any parts are missing or damaged, please contact your retailer.

This image displays the complete contents of the HGLRC Wind5 Lite V2 Frame Kit package, including all carbon fiber plates, aluminum parts, screws, and accessories.

• Arm x 4
• Arm protection bar x 2
• Верхняя пласціна x 1
• Middle plate x 1
• Bottom plate x 1
• Battery anti-slip sticker x 1
• Battery Strap 15*250mm x 2
• Dustproof belt x 1
• Camera mount x 1 (Default standard Foxeer Nano Predator 5)
• TPU shark fin x 1
• Antenna mount x 1
• Antenna x 1 (Default standard analog version antenna)
• CNC arm limiter x 1
• M3*25mm 7075 aluminum column x 4
• Round head M3*25mm x 4
• Countersunk head M3*16mm x 4
• Round head M3*12mm x 4
• Round head M3*10mm x 4
• Countersunk head M3*10mm x 2
• Round head M2*4mm x 2
• M3 Nylon nut x 4

4. Налада і зборка

Follow these general steps for assembling your HGLRC Wind5 Lite V2 frame kit. Refer to the images for visual guidance.

1. Ўстаноўка рукі: Attach the four arms to the bottom plate using the appropriate screws. Ensure the arm protection bars are also installed at this stage.


This image shows the frame constructed from high-strength carbon fiber material, emphasizing its durability. The arm protection bar is also visible, designed to reduce damage to the arms during impacts.

2. Aluminum Column Installation: Install the 7075 aviation-grade aluminum columns onto the bottom plate. These columns will support the middle and top plates, as well as protect internal components.

This image highlights the customized high-strength aviation-grade aluminum columns. These columns provide structural integrity and protect internal components such as the flight controller and camera stack.
3. Middle Plate and Electronics: Mount the middle plate. Install your flight controller and VTX onto the designated 20x20*M3 mounting holes. Ensure proper orientation and secure fastening.
4. Camera and Antenna: Attach the camera mount and your FPV camera. Install the antenna mount and the simulated RHCP mini hammer antenna. Note that the frame's antenna mount is specifically compatible with the new HGLRC mini hammer antenna.


This image displays the frame with the simulated RHCP mini hammer antenna installed. It also shows the antenna mount, noting that the frame's antenna mount is specifically compatible with the new HGLRC mini hammer antenna.

5. Верхняя пліта: Secure the top plate to the aluminum columns.
6. Battery Strap: Attach the non-slip battery strap to the frame.
7. Канчатковая праверка: Verify that all screws are tightened appropriately and all components are securely mounted before proceeding with flight controller setup and initial flight.

5. Эксплуатацыйныя меркаванні

The Wind5 Lite V2 frame provides the structural foundation for your FPV racing drone. Proper operation depends on the correct installation and configuration of all electronic components, including the flight controller, ESCs, motors, camera, and video transmitter. Ensure all components are securely mounted and wired according to their respective manuals.

The 195mm wheelbase and positive X structure are designed for agile and responsive flight characteristics, making it suitable for competitive FPV racing. Always perform pre-flight checks and ensure your drone is in optimal condition before flying.

6. Тэхнічнае абслугоўванне

Regular maintenance is crucial for the longevity and performance of your frame kit.

• агляд: Regularly inspect the carbon fiber frame for any signs of cracks, delamination, or damage, especially after crashes.
• Шчыльнасць шруб: Check all mounting screws for tightness before each flight. Vibrations can cause screws to loosen over time.
• Arm Replacement: The quick-release arm design facilitates easy replacement of damaged arms. To replace an arm, remove the single retaining screw, detach the arm, and install a new one, securing it with the screw.

This image illustrates the quick-release arm mechanism, showing an arm detached from the main frame. The design allows for easy removal and replacement of arms using a single screw, simplifying maintenance and repairs.
• Aluminum Columns: Inspect aluminum columns for bends or damage, particularly after hard impacts. Replace if compromised.
• Уборка: Clean the frame periodically to remove dirt, dust, and debris that can accumulate during use.

7. Выпраўленне непаладак

This section addresses common issues related to the frame kit.

• Пашкоджанне рамы: If the frame sustains damage (e.g., cracks in carbon fiber, bent aluminum columns) after a crash, inspect all components thoroughly. Replace damaged carbon fiber plates or aluminum columns immediately to maintain structural integrity and flight performance. Continuing to fly with a damaged frame can lead to further component failure.
• Аслабленыя шрубы: Vibrations during flight can cause screws to loosen, potentially leading to component detachment or instability. Regularly check and tighten all mounting screws, especially those securing arms, the flight controller, and motors.
• Праблемы з прыляганнем кампанентаў: Ensure all electronic components (flight controller, VTX, camera) fit correctly within the designated mounting spaces. Refer to the specifications for compatible sizes (e.g., 20x20*M3 mounting holes for flight controller/VTX). Do not force components into place.

8. Тэхнічныя характарыстыкі

Detailed specifications for the HGLRC Wind5 Lite V2 Frame Kit:

This image shows the packaging dimensions and the total weight of the kit, alongside the weight of the assembled frame.

Recommended Parts (Not Included):

• ESC: SPECTER 60A
• Кантралёр палёту: SPECTER F722 MINI
• Матор: SPECTER 2306.5-1900KV
• Камера: FOXEER predator 5NANO / Runcam Nano4
• Шруба: Gemfan 51466

9. Гарантыя

Warranty information for the HGLRC Wind5 Lite V2 Frame Kit is not provided in this manual. Please refer to the manufacturer's official website or contact your retailer for specific warranty details and terms.

10. Падтрымка

For technical support, troubleshooting assistance, or further inquiries regarding your HGLRC Wind5 Lite V2 Frame Kit, please visit the official HGLRC website or contact your product retailer. Ensure you have your product model and any relevant purchase information available when seeking support.