SMALLRIG 5855

SMALLRIG 4.5" Suction Cup Camera Mount with Ball Head Magic Arm (Model 5855) Instruction Manual

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SMALLRIG 4.5" Suction Cup Camera Mount with Ball Head Magic Arm, Model 5855.

1. Уводзіны

The SMALLRIG 4.5" Suction Cup Camera Mount is designed for secure attachment of action cameras to smooth, non-porous surfaces such as car windshields, windows, and other vehicle body panels. It features a robust suction mechanism and a flexible ball head magic arm for versatile camera positioning, making it ideal for motion photography and various filming scenarios.

This mount is compatible with a wide range of action cameras, including GoPro 13/12/11/10/9/8/7 Black, Insta360 X5/X4/X3/X2, DJI Osmo Action 5 Pro/4/3, and Osmo Pocket 3/Pocket 2.

2. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе наступныя кампаненты ўваходзяць у ваш пакет:

  • 4.5" Suction Cup Support × 1
  • Ball-Head Magic Arm × 1
  • Мацаванне для экшн-камеры × 1
  • Flat Wrench × 1
SMALLRIG 4.5 inch Suction Cup Mount package contents including suction cup, magic arm, action camera adapter, and flat wrench.

Image: Contents of the SMALLRIG 4.5" Suction Cup Camera Mount package.

3. Прадукт скончыўсяview

Familiarize yourself with the main components of the suction cup mount:

Detailed diagram of the SMALLRIG 4.5 inch Suction Cup Mount showing its components: 1/4 inch -20 Locating Hole, Action Camera Mount, Magic Arm, Air Pump Button, Release Tabs, and Suction Cup Dust Cover.

Выява: Падрабязная view of the SMALLRIG 4.5" Suction Cup Mount components.

  • Аснова прысоскі: Provides strong vacuum suction to smooth surfaces.
  • Air Pump Button: Used to create vacuum pressure for secure attachment.
  • Release Tabs: Used to release vacuum pressure for easy removal.
  • Ball Head Magic Arm: Allows for flexible positioning and angle adjustment of the camera.
  • Мацаванне экшн-камеры: Adapter for attaching action cameras.
  • 1/4'' Screw: Standard screw for attaching various camera accessories.

4. Настройка і ўстаноўка

4.1 Падрыхтоўка паверхні

For optimal adhesion and safety, ensure the mounting surface is clean, dry, and flat. Avoid rough, wet, uneven, or fragile surfaces. Dust, dirt, or moisture can significantly reduce suction strength. If attaching to surfaces with protective films, exercise caution and verify compatibility.

4.2 Мацаванне прысоскі

  1. Place the suction cup firmly against the prepared surface.
  2. Press the air pump button repeatedly until the white marking line on the pump is no longer visible. This indicates that sufficient vacuum pressure has been achieved for secure attachment.
Illustration showing how to press the air pump button on the SMALLRIG 4.5 inch Suction Cup Mount for secure vacuum installation.

Image: Pressing the air pump button for secure installation.

4.3 Далучэнне камеры

Attach your action camera to the action camera mount using the provided adapter. Then, connect the action camera mount to the ball head magic arm. Securely tighten all connections to prevent movement during use.

5. Аперацыя

5.1 Рэгуляванне вугла

The ball head magic arm allows for flexible multi-angle adjustment. Loosen the knob on the magic arm to adjust the camera to your desired angle, then tighten the knob firmly to lock it in place.

Illustration demonstrating the flexible multi-angle adjustment of the SMALLRIG 4.5 inch Suction Cup Mount using its double ball heads.

Image: Flexible multi-angle adjustment of the camera mount.

5.2 Removing the Suction Cup

To remove the suction cup, simultaneously pull up on the two rubber tabs located on the edge of the suction cup base. This will release the vacuum pressure, allowing for easy detachment from the surface.

6. Тэхнічнае абслугоўванне

  • Always keep the suction cup base and filter foam clean and intact. Any debris can compromise the suction seal.
  • When not in use, attach the included dust cover to the suction cup to prevent contamination and extend the product's lifespan.
  • Store the mount in a cool, dry place away from direct sunlight and extreme temperatures.

7. Выпраўленне непаладак

  • Страта ўсмоктвання: If the white marking line on the air pump reappears, it indicates a loss of vacuum pressure. Immediately pump the valve again until the line disappears to restore secure suction.
  • Mount Not Sticking: Ensure the mounting surface is perfectly clean, dry, and smooth. Avoid textured or porous surfaces. Check the suction cup base for any damage or debris.
  • Adhesion Status: For safety, check the adhesion status every 2 hours during operation, especially in dynamic environments like moving vehicles.
  • Пашкоджанне прадукту: Discontinue use if the suction cup base or filter foam is damaged, as this can lead to unexpected detachment and potential damage to your camera.
Important notes for the SMALLRIG 4.5 inch Suction Cup Mount, emphasizing use on clean, dry, flat surfaces, keeping the base clean, repumping if the safety line shows, caution with protective films, and regular adhesion checks.

Image: Important safety and usage notes for the suction cup mount.

8. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
МаркаSMALLRIG
Нумар мадэлі5855
МатэрыялAluminum Alloy, Nitrile Rubber, ABS, Stainless Steel
Weight Capacity (Dynamic)1.5 кг (3.3 фунта)
Vertical Suction (Static)30 кг
Horizontal Suction (Static)60 кг
Памеры прадукту137.5 × 117.6 × 55.0 мм (5.4 × 4.6 × 2.2 цалі)
Вага нета438.0 ± 5.0 г (15.4 ± 0.2 унцыі)
Тып мацаванняOne-Touch Press
Сумяшчальныя прыладыAction Cameras (GoPro, Insta360, DJI Osmo Action)
Diagram showing the dimensions of the SMALLRIG 4.5 inch Suction Cup Mount and the action camera adapter.

Выява: Памеры і характарыстыкі прадукту.

9. Гарантыя і падтрымка

Гэты прадукт пастаўляецца з a Гарантыя ад вытворцы 2 год. For warranty claims or technical support, please contact SMALLRIG customer service through their official webсайт або ваш прадавец.

For additional resources and product information, visit the official SMALLRIG webсайт: www.smallrig.com