SUNLU Standard 3D Printer Resin (2KG Grey) Instruction Manual

1. Уводзіны

This manual provides essential instructions for the safe and effective use of SUNLU Standard 3D Printer Resin. This 405nm UV-curing photopolymer resin is designed for LCD, DLP, and SLA 3D printers, offering high compatibility and reliable performance for various printing applications.

2. Тэхніка бяспекі

Always prioritize safety when handling 3D printer resin. Failure to follow these precautions may result in injury or damage.

• Апранайце ахоўнае рыштунак: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
• Абарона вачэй: Avoid contact with eyes. If resin gets into eyes, flush immediately with plenty of water and seek medical attention.
• Небяспека пры праглынанні: This product is not edible. If swallowed, seek medical attention immediately.
• Захоўваць па-за дасяжнасцю: Keep the resin out of reach of children and pets.
• No Food or Drink: Do not store or consume food or drinks near the resin.
• Вентыляцыя: Выкарыстоўваць у добра вентыляваным памяшканні.
• Правільная ўтылізацыя: Do not pour uncured resin down drains or dispose of it in regular trash. Cure liquid resin under UV light before disposal.

3. Асаблівасці прадукту

• Лёгкі ў выкарыстанні: Strong fluidity, compatible with various printers and printing speeds, suitable for beginners.
• Good Stability: High tolerance to weak acids and greases, ensuring printed works are not easily deformed.
• Easy Post-processing: Hard and smooth surface, easy to color after printing.
• Low Shrinkage: Provides accurate size and shape of printed parts during curing.
• Лёгка чысціць: Effortless cleaning with isopropyl alcohol or ethanol for a smooth surface finish.
• High Cost-Effectiveness: Good performance and durability at an affordable price.
• Minimal Odor: Light odor during printing, balancing functionality with user comfort.
• Высокая сумяшчальнасць: 365-405nm printing wavelength, compatible with 99% of LCD, DLP, and SLA printers.
• Leak-proof Bottle Design: Patented design and strict packaging to ensure safe delivery.

4. Настройка

1. Страсянуць бутэльку: Before each use, shake the resin bottle well for at least 30 seconds to ensure proper mixing of components.
2. Заліць смалу: Carefully pour the resin into your 3D printer's resin vat, ensuring not to exceed the maximum fill line.

5. Інструкцыя па эксплуатацыі

The SUNLU Standard Resin is compatible with 365-405nm UV light sources. Optimal printing results depend on your specific 3D printer model and environmental conditions. Below are general recommended settings:

Recommended Printing Parameters:

Note: These settings are general guidelines. Always refer to your 3D printer's specific recommendations and perform calibration tests for optimal results.

6. Пасляапрацоўка

1. Выдаліць друк: Carefully remove the printed model from the build plate using a scraper.
2. Выдаліць апоры: Gently remove any support structures from the model.
3. Clean Model: Wash the printed model thoroughly with 95% isopropyl alcohol or ethanol for approximately 30 seconds to remove uncured resin. For best results, use a dedicated resin washing machine or an ultrasonic cleaner.
4. Dry Model: Allow the model to air dry completely or use compressed air.
5. Пасля лячэння: Place the cleaned and dried model in a UV curing chamber or under direct sunlight until fully cured. This enhances the model's hardness and durability.

7. Захоўванне

• Кантэйнер: Store resin in its original, sealed container.
• Размяшчэнне: Keep in a cool, dry, and dark place, away from direct sunlight and UV light sources. UV light will cure the photosensitive resin.
• тэмпература: Ideal storage temperature is 15-35°C. Lower temperatures may increase resin viscosity.
• Забруджванне: Ensure the container is sealed to prevent dust or moisture from affecting print quality. Do not pour unused resin back into the original container to avoid contamination.
• Тэрмін прыдатнасці: For best results, use within one year of purchase.

8. Выпраўленне непаладак

If you encounter issues during printing, consider the following common solutions:

• Failed Prints/Adhesion Issues:
  • Пераканайцеся, што пласціна для зборкі належным чынам выраўнавана і чыстая.
  • Павялічце час экспазіцыі ніжняга пласта.
  • Verify ambient temperature is within the recommended range (20-30°C).
• Poor Detail/Soft Prints:
  • Increase normal exposure time.
  • Ensure adequate post-curing.
• Resin Not Curing:
  • Check if the UV light source is functioning correctly.
  • Confirm the resin's curing wavelength (405nm) matches your printer's UV light.
• Excessive Odor:
  • Ensure proper ventilation in your printing area.
  • Use an air purifier if necessary.

For more specific issues, consult your 3D printer's user manual or contact SUNLU customer support.

9. Тэхнічныя характарыстыкі

• матэрыял: Fast curing standard photopolymer resin
• Curing Wavelength: 365-405 нм
• Спосаб ачысткі: 95% Ethanol or Isopropanol
• Heat Distortion Temperature: 55 ° C (131 ° F)
• Памеры ўпакоўкі: 10.94 х 7.64 х 2.83 цалі
• Вага прадмета: 4.4 фунтаў (2 кг)
• вытворца: САНЛУ

10. Гарантыя і падтрымка

For any product-related inquiries, technical support, or warranty information, please contact SUNLU directly through their official channels. You can visit the SUNLU Store on Amazon or refer to the contact information provided on the product packaging.