Baseus EnerFill FC11 Digital Display Power Bank User Manual

1. Уводзіны

The Baseus EnerFill FC11 is a 10000mAh 45W portable power bank designed for efficient and convenient charging of multiple devices. It features dual built-in USB-C cables, a USB-C port, and a USB-A port, allowing for simultaneous charging of up to four devices. The integrated digital display provides real-time battery status and charging wattage. Its compact and lightweight design makes it suitable for daily use and travel.

Image 1.1: Baseus EnerFill FC11 Power Bank showing its compact size, dual built-in USB-C cables, and digital battery level display.

2. Прадукт скончыўсяview

Familiarize yourself with the components of your Baseus EnerFill FC11 Power Bank:

• Лічбавай дысплей: Паказвае рэшту батарэі ў працэнтахtage and current charging wattage.
• Built-in USB-C1 Cable: For charging devices and recharging the power bank (two-way).
• Built-in USB-C2 Cable: Для зарадкі прылад.
• Порт USB-C: For charging devices and recharging the power bank.
• Порт USB-A: Для зарадкі прылад.
• Кнопка харчавання: Activates the digital display and initiates charging.

Image 2.1: The power bank demonstrating its two-way built-in USB-C cable for both recharging (30W Max Input) and charging devices (45W Max Output).

3. Setup: Recharging the Power Bank

Before initial use, fully charge your Baseus EnerFill FC11 Power Bank.

1. Using the Built-in USB-C1 Cable: Connect the built-in USB-C1 cable to a compatible USB-C wall charger (not included). The digital display will show the charging progress.
2. Выкарыстанне порта USB-C: Alternatively, connect a USB-C to USB-C cable (not included) from a compatible wall charger to the power bank's USB-C port.

The power bank supports 30W rapid input, allowing for quick recharging. The digital display will indicate 100% when fully charged.

4. Operating Instructions: Charging Your Devices

The Baseus EnerFill FC11 offers versatile charging options for various devices.

4.1. Charging with Built-in USB-C Cables

• Extend either the built-in USB-C1 or USB-C2 cable.
• Connect the USB-C end of the cable directly to your compatible device (e.g., smartphone, tablet, laptop).
• The power bank will automatically begin charging. The digital display will show the current battery level and output wattage.

4.2. Charging with USB-C and USB-A Ports

• Выкарыстоўвайце кабель для зарадкі вашай прылады.
• Connect one end of the cable to your device and the other end to either the USB-C port or the USB-A port on the power bank.
• Press the power button once to initiate charging if it doesn't start automatically.

4.3. Адначасовая зарадка

The power bank supports charging up to four devices concurrently using a combination of its built-in cables and ports.

Image 4.1: The power bank providing power to a tablet, two smartphones, and earbuds simultaneously.

4.4. High-Speed Charging

The power bank delivers up to 45W fast charging. When charging a single device, the built-in USB-C cables and USB-C port can provide optimal charging speeds for compatible devices.

Image 4.2: Illustration of fast charging capabilities, showing an iPhone 17 Pro reaching 67% and a Samsung S25 Ultra reaching 70% in 30 minutes.

4.5. Digital Display Information

The digital display shows the remaining battery percentage of the power bank and the current output wattage when charging devices.

Image 4.3: The power bank's 10,000mAh capacity provides approximately 1.8 charges for an iPhone 17 and 1.6 charges for a Samsung S25.

5. Інфармацыя па бяспецы

The Baseus EnerFill FC11 is equipped with multiple safety features to ensure safe operation:

• Кантроль тэмпературы NTC: Built-in NTC sensors monitor temperature 300 times per minute for precise temperature control, preventing overheating during high-speed charging.
• Мультысістэма абароны: Guards against overcurrent, overvoltage, overheating, over-discharge, and short circuits.

Image 5.1: Illustration of the NTC temperature control system for safe operation.

Важныя меры бяспекі:

• Не падвяргайце знешні акумулятар уздзеянню экстрэмальных тэмператур (высокіх або нізкіх).
• Пазбягайце падзення і моцных удараў павербанка.
• Do not disassemble or attempt to repair the power bank.
• Захоўваць удалечыні ад вады і іншых вадкасцяў.
• Захоўваць у сухім прахалодным месцы.

6. Тэхнічнае абслугоўванне

• Уборка: Працірайце знешні акумулят мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• захоўванне: If storing for an extended period, charge the power bank to approximately 50-75% and recharge every 3-6 months to maintain battery health.
• Сыход за кабелем: Ensure the built-in cables are properly tucked away when not in use to prevent damage.

7. Выпраўленне непаладак

• Паўэрбанк не зараджаецца: Ensure the charging cable and wall adapter are functioning correctly and properly connected. Try a different cable or adapter.
• Прылада не зараджаецца ад паўэрбанка: Press the power button on the power bank. Ensure your device's cable is securely connected to both the device and the power bank. Check if the power bank has sufficient charge.
• Павольная зарадка: Ensure your device and cable support fast charging. If multiple devices are connected, the charging speed may be distributed.
• Лічбавы дысплей не працуе: Press the power button. If the issue persists, the power bank may require recharging or service.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

Baseus products are manufactured to high quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Baseus webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.