Fosmon Fosmon 3 Outlet + 3 Remote Control Combo

Fosmon Indoor Outdoor Remote Control Outlet Switch Combo Instruction Manual

Model: Fosmon 3 Outlet + 3 Remote Control Combo

Уводзіны

This manual provides detailed instructions for the safe and efficient use of your Fosmon Indoor Outdoor Remote Control Outlet Switch Combo. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Інфармацыя па бяспецы

Выконвайце наступныя меры бяспекі, каб пазбегнуць траўмаў або пашкоджання вырабу:

  • Не апускайце выраб у ваду ці іншыя вадкасці.
  • Ensure the product is plugged into a GFCI (Ground Fault Circuit Interrupter) approved outlet when used outdoors.
  • When using outdoors, position the outlet hanging down to prevent moisture from entering the plug.
  • Do not exceed the maximum electrical ratings specified in this manual.
  • Захоўваць у месцах, недаступных дзецям.
  • Не разбірайце і не мадыфікуйце прадукт.
ETL Listed Mark on the back of the remote control outlet
Image: ETL Listed Mark. This image displays the ETL Listed mark on the back of the remote control outlet, indicating compliance with safety guidelines.
Weather-resistant remote control outlet with water droplets
Image: Weather-Resistant Design. The image shows the remote control outlet with water droplets, highlighting its weather-resistant cord and casing suitable for outdoor use.

Змест пакета

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • 3x Remote Control Outlet Receivers
  • 3x Remote Control Transmitters
  • 3x CR2032 Batteries (pre-installed in remotes)

Асаблівасці прадукту

  • Wireless remote control for indoor and outdoor lighting and appliances.
  • Weather-resistant construction for outdoor applications.
  • Grounded 3-prong AC plug for standard outlets.
  • Pair and un-pair functionality for customizable control.
  • Operating range of up to 30 meters (98.4 feet) in open areas.
  • Compact remote design.
Compact remote control with dimensions 3.2in / 81mm length, 1.5in / 37mm width, 0.7in / 17mm thickness
Image: Compact Remote Dimensions. This image illustrates the compact size of the remote control, showing its dimensions: 3.2 inches (81mm) in length, 1.5 inches (37mm) in width, and 0.7 inches (17mm) in thickness.

Тэхнічныя характарыстыкі

Max Range (Open Area)30 метраў / 98.4 футы
Аддалены акумулятарCR2032 (у камплекце)
Выкарыстоўвайце асяроддзеАдкрыты і закрыты
Тып разеткіSingle 125VAC outlet
Максімальны ток15A Макс
Электрычныя рэйтынгі125VAC, 60HZ, 15A (Resistive, General purpose)
125VAC, 60HZ, 10A / 1250W (Tungsten)
125VAC, 60HZ, 1/2HP TV-5
Частата433.92 МГц
Працоўная тэмпература-13°F~104°F / -25°C~40°C
СертыфікатыETL уключаны ў спіс

Інструкцыя па наладзе

Першапачатковае спалучэнне

The remote control outlets and remotes are pre-paired from the factory. If re-pairing is needed or if you wish to customize your control setup, follow these steps:

  1. Plug the remote control outlet receiver into an electrical wall outlet. The indicator light on the receiver will turn on.
  2. Within 29 seconds of plugging in the receiver, press the ON or OFF button on the desired remote control transmitter.
  3. The indicator light on the receiver will blink once to confirm successful pairing.

Note: Multiple outlets (receivers) can be paired to one remote, and multiple remotes can be paired to one outlet.

Diagram showing pairing process: plug in outlet, press remote button within 29 seconds
Image: Advanced Pair/Unpair Technology. This diagram illustrates the pairing process: 1) Plug the remote outlet into an electrical outlet. 2) Press the remote button within 29 seconds to establish a connection.

Разлучэнне

To unpair a remote from an outlet:

  1. Unplug the remote control outlet receiver from the wall outlet.
  2. Press and hold the ON button on the remote control transmitter.
  3. While still holding the ON button, plug the remote control outlet receiver back into the wall outlet.
  4. Continue holding the ON button for approximately 5 seconds until the indicator light on the receiver blinks rapidly, then release. This indicates successful unpairing.

Меркаванні па ўстаноўцы

  • Унутранае выкарыстанне: Plug the remote control outlet into any standard 3-prong wall outlet.
  • Выкарыстанне на адкрытым паветры:
    • Always plug into a GFCI approved outlet.
    • Hang the outlet with the plug facing downwards to prevent water entry.
    • Ensure the connected appliance is also suitable for outdoor use.
Diagram showing various Fosmon remote control outlets and switches that can be paired
Image: Expandable and Customizable System. This image demonstrates how the remote control outlets can be expanded and customized by pairing with other Fosmon indoor and outdoor remote control outlets and switches (sold separately).
Outdoor remote control outlet plugged into a wall outlet with plants around it
Image: Outdoor Installation Exampле. The image shows a remote control outlet installed outdoors, plugged into a wall outlet, with plants in the foreground, illustrating a typical outdoor setup.

Інструкцыя па эксплуатацыі

Once the remote control outlet is plugged in and paired with its remote, operation is straightforward:

  • Націсніце ON button on the remote control transmitter to turn on the connected appliance or light.
  • Націсніце ВЫКЛ button on the remote control transmitter to turn off the connected appliance or light.

The remote can control the outlet from a distance of up to 30 meters (98.4 feet) in open areas, allowing for convenient control of hard-to-reach outlets or outdoor lighting from indoors or a vehicle.

Hand holding a single-button remote control, with a Christmas tree visible through a window in the background
Image: Single Button Remote Operation. This image shows a hand holding the remote control, demonstrating its single-button operation to turn on lighting from a distance of 30m (98.4ft), with a Christmas tree visible through a window.

Тэхнічнае абслугоўванне

Уборка

To clean the remote control outlet or transmitter, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.

Замена батарэі (пульт дыстанцыйнага кіравання)

The remote control uses a CR2032 battery. If the remote's range decreases or it stops responding, the battery may need replacement.

  1. Знайдзіце батарэйны адсек на задняй частцы пульта дыстанцыйнага кіравання.
  2. Use a small screwdriver or coin to open the compartment.
  3. Выміце старую батарэю CR2032.
  4. Устаўце новую батарэю CR2032 станоўчым (+) бокам уверх.
  5. Надзейна зачыніце батарэйны адсек.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Outlet does not respond to remote.
  • Outlet not plugged in.
  • Батарэя пульта дыстанцыйнага кіравання разрадзілася.
  • Outlet and remote are not paired.
  • Па-за дыяпазонам.
  • Перашкоды.
  • Ensure outlet is securely plugged into a live electrical socket.
  • Заменіце батарэю CR2032 у пульце.
  • Follow the "Initial Pairing" steps to re-pair the remote and outlet.
  • Move closer to the outlet.
  • Relocate the outlet or remote to minimize interference from other wireless devices.
Outlet indicator light does not turn on.
  • Няма электрычнасці ў разетцы.
  • Разетка няспраўная.
  • Check the wall outlet with another appliance. Check circuit breaker.
  • Contact customer support if the outlet remains unresponsive after checking power.
Зніжаная далёкасць дыстанцыйнага кіравання.
  • Нізкі ўзровень зарада батарэі пульта дыстанцыйнага кіравання.
  • Obstructions or interference.
  • Заменіце батарэю CR2032.
  • Ensure a clear line of sight between the remote and the outlet, or reduce the distance.

Гарантыя і падтрымка

This Fosmon product includes a limited lifetime warranty. For more details regarding the warranty policy or for technical support, please visit the official Fosmon webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.

Фосмон Webсайт: www.fosmon.com

Абслугоўванне кліентаў: Refer to the Fosmon webсайт для кантактнай інфармацыі.

© 2023 Fosmon. Усе правы абаронены.