RIDGID 18V SubCompact Brushless 1/2 in. Drill/Driver Kit R87012K User Manual

1. Прадукт скончыўсяview

The RIDGID 18V SubCompact Brushless 1/2 inch Drill/Driver Kit (Model R87012K) combines powerful brushless motor technology with a compact tool design. This kit is engineered for a wide range of demanding drilling and driving applications, offering a lightweight and efficient solution for both professional and home use.

Figure 1: RIDGID 18V SubCompact Brushless 1/2 inch Drill/Driver Kit.

Асноўныя характарыстыкі

• Lightweight Design for enhanced maneuverability.
• Powerful Brushless Motor delivering 500 in./lbs. of torque and 0-450 / 0-1,750 RPM.
• 15% lighter and 25% more compact compared to the 18V Brushless model (R86114).
• 24-position clutch for precise torque control to match various applications.
• 2-speed gearbox to optimize power and speed for different tasks.
• Integrated LED Light for improved visibility in low-light conditions.
• 100% compatible with all RIDGID 18V batteries.

2. Інфармацыя па бяспецы

Заўсёды чытайце і разумейце ўсе папярэджанні па бяспецы, інструкцыі, ілюстрацыі і характарыстыкі, якія пастаўляюцца з гэтым электраінструментам. Невыкананне ўсіх інструкцый, пералічаных ніжэй, можа прывесці да паражэння электрычным токам, пажару і/або сур'ёзных траўмаў.

Агульныя папярэджанні па тэхніцы бяспекі пры выкарыстанні электраінструментаў

• Бяспека ў рабочай зоне: Падтрымлівайце чысціню і добрае асвятленне працоўнага месца. Захламленыя або цёмныя месцы могуць прывесці да няшчасных выпадкаў. Не выкарыстоўвайце электраінструменты ў выбуханебяспечных асяроддзях, напрыклад, у прысутнасці лёгкаўзгаральных вадкасцей, газаў або пылу.
• Электрабяспека: Штэкеры электраінструментаў павінны адпавядаць разетцы. Ніколі не змяняйце штэкер. Не злоўжывайце шнуром. Ніколі не выкарыстоўвайце шнур для пераноскі, выцягвання або адключэння электраінструмента ад сеткі.
• Асабістая бяспека: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating power tools for extended periods. Dress properly. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• Выкарыстанне інструмента і догляд за ім: Не перагружайце электраінструмент. Выкарыстоўвайце адпаведны электраінструмент для вашай задачы. Адключыце вілку ад крыніцы сілкавання і/або выміце акумулятарную батарэю з электраінструмента, перш чым рабіць якія-небудзь рэгуляванні, замяняць аксэсуары або захоўваць электраінструмент.
• Выкарыстанне і догляд за акумулятарным інструментам: Зараджайце толькі зараднай прыладай, рэкамендаванай вытворцам. Выкарыстоўвайце электраінструменты толькі са спецыяльна прызначанымі акумулятарнымі блокамі.

3. Кампаненты ў камплекце

Your RIDGID 18V SubCompact Brushless 1/2 in. Drill/Driver Kit includes the following items:

• R87012 18V SubCompact Brushless 1/2 in. Drill/Driver
• (2) 2.0 Ah Batteries
• Зарадная прылада
• Belt Hook with Screw
• Driving Bit
• Сумка для інструментаў

4. Настройка

Ўстаноўка і зняцце батарэі

To install the battery, align the battery pack with the base of the tool and slide it in until it clicks securely into place. To remove the battery, press the two pinch tabs on the sides of the battery pack and slide it out.

Figure 2: Proper battery installation into the drill/driver.

Ўстаноўка і выдаленне біта

The drill/driver features a 1/2 inch ratcheting chuck for secure bit retention. To install a bit, twist the chuck counter-clockwise to open the jaws. Insert the bit fully into the chuck, then twist the chuck clockwise by hand until the bit is firmly secured. You will hear a clicking sound as it ratchets into place, indicating a secure grip. To remove a bit, twist the chuck counter-clockwise to loosen the jaws and pull the bit out.

Figure 3: Key components of the drill/driver, including the 1/2 inch ratcheting chuck.

Зарадка акумулятара

Connect the charger to a standard power outlet. Insert the battery pack into the charger. The indicator lights on the battery will show the charge level. Allow the battery to fully charge before first use and whenever the charge level is low. Refer to the charger's specific instructions for detailed charging times and indicator meanings.

Figure 4: Battery with visible charge level indicator.

5. Інструкцыя па эксплуатацыі

Уключэнне/выключэнне

To operate the drill/driver, press the variable speed trigger. The tool will start rotating. Release the trigger to stop the tool. The speed is proportional to how far the trigger is pressed.

Рэгуляванне параметраў хуткасці

The drill/driver features a 2-speed gearbox located on top of the tool. Slide the switch to position '1' for lower speed and higher torque, ideal for driving screws or drilling large holes. Slide the switch to position '2' for higher speed and lower torque, suitable for drilling smaller holes.

Adjusting Clutch Settings

The 24-position clutch allows you to adjust the torque output to prevent over-driving screws or damaging materials. Rotate the clutch collar to select the desired torque setting. Lower numbers provide less torque, while higher numbers provide more. For drilling, set the clutch to the drill icon for maximum torque.

Выкарыстанне святлодыёднага святла

The integrated LED light illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces.

Агульная аперацыя

When drilling or driving, ensure the workpiece is securely clamped. Apply steady, even pressure to the tool. For drilling, start with a pilot hole if necessary, especially in hard materials or near edges. For driving, select a clutch setting that allows the screw to be driven flush without stripping the head or damaging the material.

Figure 5: Driving a screw into wood with the drill/driver.

Figure 6: Operating the drill/driver in a confined area.

Figure 7: Installing cabinet hardware with the drill/driver.

Figure 8: Drilling into a metal channel.

Figure 9: Drilling into a wooden stud.

6. Тэхнічнае абслугоўванне

Уборка

Keep the tool's air vents clear and free of debris to prevent overheating. Use a clean, dry cloth to wipe down the tool. Do not use solvents or harsh chemicals, as these can damage plastic parts.

Захоўванне

Store the tool, batteries, and charger in a cool, dry place, away from direct sunlight and moisture. Ensure batteries are partially charged before long-term storage. Keep out of reach of children.

Сыход за батарэяй

Do not store batteries in discharged condition. Recharge them regularly, even if not in use, to maintain optimal performance and lifespan. Avoid exposing batteries to extreme temperatures.

7. Выпраўленне непаладак

• Інструмент не запускаецца: Ensure the battery is fully charged and properly inserted. Check that the forward/reverse selector is not in the center (locked) position.
• Зніжэнне магутнасці/прадукцыйнасці: The battery may be low on charge. Recharge the battery. Ensure the correct speed and clutch settings are selected for the task.
• Перагрэў: Ensure the tool's ventilation slots are not blocked. Allow the tool to cool down before continuing use. Avoid continuous heavy-duty operation.
• Праслізгванне біт у патроне: Ensure the chuck is tightened securely by hand. The ratcheting mechanism should click into place.

Калі праблемы не знікнуць, звярніцеся ў службу падтрымкі.

8. Тэхнічныя характарыстыкі

9. Інфармацыя аб гарантыі

This RIDGID product is covered by the manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official RIDGID webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

10. Падтрымка кліентаў

For technical assistance, replacement parts, or any questions regarding your RIDGID 18V SubCompact Brushless 1/2 in. Drill/Driver Kit, please contact RIDGID customer support. Contact information can be found on the official RIDGID webна сайце або ў дакументацыі, якая пастаўляецца з вашым прадуктам.