VTOMAN X3 Jump Starter with Air Compressor and V-Truck Pro Jump Starter User Manual

1. Уводзіны

This manual provides detailed instructions for the safe and effective use of your VTOMAN X3 Jump Starter with Air Compressor and VTOMAN V-Truck Pro Jump Starter. These devices are designed to provide reliable power for jump-starting vehicles and other emergency needs. Please read this manual thoroughly before operation and retain it for future reference.

Стартар VTOMAN X3 з паветраным кампрэсарам

The VTOMAN X3 is an all-in-one portable device combining a 3500A peak current jump starter, a 160 PSI air compressor, an LED light, an SOS alarm, and a USB charging port. It is designed for jump-starting vehicles with up to 9L gas or 8.5L diesel engines and for inflating tires with precision.

VTOMAN V-Truck Pro Jump Starter

The VTOMAN V-Truck Pro is a heavy-duty portable jump starter delivering an 8000A peak current. It is compatible with all 12V vehicles, including trucks, RVs, tractors, boats, and other large-displacement diesel engines. It also features a 41600mAh power bank with 65W fast charging capabilities for various electronic devices.

2. Інфармацыя па бяспецы

Always observe the following safety precautions to prevent personal injury or damage to the device and vehicle.

• Прачытайце ўсе інструкцыі перад выкарыстаннем.
• Пры працы з батарэямі апранайце сродкі абароны вачэй і ахоўную вопратку.
• Ensure the work area is well-ventilated. Do not smoke or allow sparks or flames near the battery or jump starter.
• Трымайце прыладу сухім. Не падвяргайце яе ўздзеянню дажджу або вільготных умоў.
• Захоўваць у месцах, недаступных дзецям.
• Не спрабуйце запусціць замерзлы акумулятар ад дажджу.
• Не злучайце дадатныя і адмоўныя склampразам.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Do not over-inflate tires. Always monitor pressure during inflation.
• Не разбірайце прыладу. Звярніцеся па абслугоўванне да кваліфікаванага персаналу.

3. Прадукт скончыўсяview

VTOMAN X3 Components

• Jump Starter Port
• Порт паветранага шланга
• Выхадны порт USB
• Святлодыёдны экран
• Control Buttons (+, -, M)
• Святлодыёдны ліхтарык

Image: The VTOMAN X3 unit displaying its LED screen with battery level, preset pressure, real-time pressure, tire pressure unit, and inflation mode indicators. Various buttons are visible for control.

VTOMAN V-Truck Pro Components

• Jump Starter Port
• Уваходны порт пастаяннага току
• Порт уваходу/вываду USB-C
• USB-A Output Ports (A1, A2)
• Святлодыёдныя індыкатары батарэі
• Кнопка харчавання

Image: The VTOMAN V-Truck Pro jump starter connected to a vehicle battery with its heavy-duty clamps. The unit's ports and LED indicators are visible.

4. Настройка

Першапачатковая зарадка

Before first use, fully charge your VTOMAN jump starter. It is recommended to fully charge the unit after each use and at least every 3-6 months to maintain battery health.

• VTOMAN V-Truck Pro: Connect the provided 65W charger to the DC input port. A full charge takes approximately 2.5 hours for the 41600mAh battery.
• VTOMAN X3: Connect a compatible USB-C charger to the USB-C input port. The LED screen will indicate charging status.

Image: The VTOMAN V-Truck Pro unit acting as a portable power bank, charging a smartphone, iPad, earphone, smart watch, camera, drone, and game console via its USB ports.

5. Інструкцыя па эксплуатацыі

5.1. Запуск аўтамабіля ад дажджу

Ensure your jump starter is sufficiently charged before attempting to jump-start a vehicle.

1. Выключыце запальванне аўтамабіля і ўсё дадатковае абсталяванне (асвятленне, радыё і г.д.).
2. Злучыць чырвоны (+) склamp of the jumper cables to the positive (+) terminal of the vehicle's dead battery.
3. Злучыць чорны (-) склamp of the jumper cables to the negative (-) terminal of the vehicle's dead battery, or to a solid, unpainted metal part of the vehicle's chassis away from the battery.
4. Insert the jumper cable plug firmly into the jump starter's jump start port.
5. Start the vehicle's engine. If it does not start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
6. Once the vehicle starts, immediately disconnect the jumper cable plug from the jump starter.
7. Remove the black (-) clamp from the vehicle, then remove the red (+) clamp.

Сумяшчальнасць рухавікоў:

• VTOMAN X3: Up to 9L Gas / 8.5L Diesel Engines.
• VTOMAN V-Truck Pro: All Gas / All Diesel Engines (12V vehicles).

Image: The VTOMAN X3 jump starter connected to a car battery, demonstrating the jump-starting process. The unit's display shows operational status.

5.2. Using the Air Compressor (VTOMAN X3 Only)

The VTOMAN X3 features a 160 PSI air compressor with auto-shutoff.

1. Screw the air hose onto the tire valve stem.
2. Connect the other end of the air hose to the air hose port on the VTOMAN X3.
3. Power on the X3 unit. The LED screen will display the current tire pressure.
4. Press the 'M' button to cycle through preset modes (Car, Motorcycle, Bicycle, Ball, Custom) or to select desired pressure units (PSI, KPA, BAR).
5. Use the '+' and '-' buttons to set the target pressure.
6. Press the power button to start inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the X3 unit.

Image: The VTOMAN X3 unit connected to a car tire valve, actively inflating the tire. The digital display shows the pressure reading and inflation status.

5.3. Выкарыстанне ў якасці партатыўнага паўэрбанка

Both VTOMAN jump starters can charge electronic devices.

• Connect your device's USB charging cable to the appropriate USB-A or USB-C output port on the jump starter.
• Прылада пачне зараджацца.
• VTOMAN V-Truck Pro: Features a 41600mAh capacity and 65W fast charging output, capable of charging a smartphone approximately 8-10 times.

5.4. Using the LED Light / SOS Function (VTOMAN X3 Only)

The VTOMAN X3 includes an integrated LED flashlight with SOS capabilities.

• Press and hold the dedicated light button (if available) or the power button (refer to specific model instructions) to turn on the LED light.
• Press again to cycle through different modes (e.g., steady on, strobe, SOS).
• Націсніце і ўтрымлівайце, каб выключыць.

6. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and optimal performance of your VTOMAN jump starter.

• Уборка: Працірайце прыладу сухой мяккай тканінай. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.
• захоўванне: Захоўвайце стартар у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Перазарадка: Recharge the unit fully after each use. If not used frequently, recharge at least every 3-6 months to prevent deep discharge and prolong battery life.
• Праверка кабеля: Regularly inspect jumper cables and air hoses for any signs of damage, wear, or corrosion. Replace if necessary.

7. Выпраўленне непаладак

If you encounter issues with your VTOMAN jump starter, refer to the following common problems and solutions.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For detailed warranty information, please refer to the official VTOMAN website or the warranty card included with your product packaging. For technical support, troubleshooting assistance, or replacement parts, please contact VTOMAN customer service through their official channels.