CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Важныя інструкцыі па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі па тэхніцы бяспекі перад выкарыстаннем гэтай прылады. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або сур'ёзных траўмаў.

• Always connect the unit to a grounded outlet.
• Не апускайце асноўны блок у ваду ці іншыя вадкасці.
• Не выкарыстоўвайце ачышчальнік без вадкасці ў бачку.
• Захоўваць у месцах, недаступных дзецям.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Прадукт скончыўсяview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Асноўныя характарыстыкі

• Ёмістасць 10 л: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Sweep Function: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Рэжым дэга: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Рэгуляваная магутнасць: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Рэгуляваны таймер: 0-30 minute timer for precise control over cleaning cycles.
• Кантроль тэмпературы: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• Канструкцыя з нержавеючай сталі 304: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Змест пакета

Пераканайцеся, што ўсе прадметы ёсць у наяўнасці і знаходзяцца ў добрым стане пасля распакавання.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 х Шнур харчавання
• 1 x Mesh Basket
• 1 х зліўны шланг
• 1 х Інструкцыя па эксплуатацыі

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Выява: Оверview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Настройка

1. Распакаванне: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Размяшчэнне: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Падключэнне сілкавання: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Запоўніце бак: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Уставіць кошык: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Аперацыя

Familiarize yourself with the control panel before beginning operation.

Панэль кіравання скончыласяview

Выява: Падрабязны view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Выключальнік сілкавання: Уключае/выключае прыладу.
• Кіраванне таймерам: Adjusts the cleaning duration from 0 to 30 minutes.
• Кантроль тэмпературы: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Працэдура ачысткі

1. Падрыхтуйце прадметы: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Дадаць рашэнне: Fill the tank with the appropriate cleaning solution.
3. Усталяваная тэмпература (неабавязкова): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Пачаць ачыстку: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Сачыць за прагрэсам: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Завяршэнне ўборкі: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Прамыйце і высушыце: Rinse the cleaned items thoroughly with clean water and dry them completely.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. Тэхнічнае абслугоўванне

Правільнае абслугоўванне забяспечвае даўгавечнасць і аптымальную працу вашага ультрагукавога ачышчальніка.

• Сліў бака: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Ачыстка бака: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp тканінай. Не выкарыстоўвайце абразіўныя ачышчальныя сродкі і не апускайце прыладу ў ваду.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• захоўванне: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Рэгулярны агляд: Periodically inspect the power cord for any damage. If damaged, discontinue use and contact customer support.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Выпраўленне непаладак

Звярніцеся да гэтага раздзела, каб даведацца пра распаўсюджаныя праблемы і іх рашэнні. Калі праблема не знікне, звярніцеся ў службу падтрымкі кліентаў.

7. Тэхнічныя характарыстыкі

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon