Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw Instruction Manual

Важная інфармацыя па бяспецы

Always read and understand this manual before operating the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the saw.
• Ensure the safety lock button is engaged to prevent accidental starts when the tool is not in use or during maintenance.
• Keep hands, hair, and loose clothing away from the chain and moving parts.
• Do not operate the saw in wet conditions or near flammable liquids or gases.
• Always maintain a firm grip with one hand on the handle and ensure stable footing.
• Only use the saw for its intended purpose: trimming branches, shrubs, and woody stems up to 5 inches thick.
• Трымайце дзяцей і навакольных далей ад працоўнай зоны.

Што ўключана

The Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw package includes the following components:

Малюнак 1: All components included in the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw kit. This includes the pruning saw, 4.0Ah battery, charger, chain, guide bar, chain cover, oil bottle, wrench, screwdriver, safety glasses, and gloves.

• Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw
• Літый-іённы акумулятар 20 В 4.0 Аг
• Зарадная прылада
• 6-inch Cutting Chain
• 5-цалевая накіроўвалая шына
• Chain and Sprocket Cover
• Protective Bar Sheath
• Refillable Oil Bottle
• Гаечны ключ
• Адвёртка
• Ахоўныя акуляры
• Працоўныя пальчаткі
• Кіраўніцтва па эксплуатацыі

Настройка

1. Зарадка акумулятара

Before first use, fully charge the 20V 4.0Ah lithium-ion battery. Connect the charger to a standard power outlet and insert the battery. The indicator light on the charger will show the charging status. Refer to the charger's specific instructions for detailed charging procedures and times.

2. Installing the Chain and Guide Bar

1. Ensure the battery is removed from the saw before installation.
2. Remove the chain and sprocket cover using the provided wrench.
3. Carefully place the chain around the sprocket and guide bar, ensuring the cutting edges are facing the correct direction.
4. Reattach the chain and sprocket cover, but do not fully tighten the nuts yet.
5. Adjust the chain tension using the tensioning screw until the chain is snug but can still be pulled freely around the guide bar by hand. There should be no slack on the underside of the guide bar.
6. Once tensioned, fully tighten the nuts on the chain and sprocket cover.

3. Filling the Oil Reservoir (Self-Lubricating System)

Малюнак 2: The self-lubricating system ensures continuous chain lubrication during operation. The oil reservoir is visible on the top of the saw.

The saw features a self-lubricating system to ensure smooth operation and extend chain life. Fill the oil reservoir with appropriate bar and chain oil (not included) using the provided refillable oil bottle. Regularly check the oil level during use and refill as needed.

Інструкцыя па эксплуатацыі

1. Запуск пілы

Малюнак 3: The safety button lock must be pressed before the trigger can be engaged to start the saw.

1. Ensure the battery is securely inserted into the saw.
2. Grip the saw firmly with one hand.
3. Press and hold the safety lock button (located near the trigger).
4. While holding the safety lock button, squeeze the trigger to start the saw. Release the safety lock button once the saw is running.
5. Каб спыніць пілу, адпусціце курок.

2. Прыёмы выразання

Малюнак 4: The compact design allows for precise cutting of branches up to 5 inches in diameter.

• Always ensure stable footing and a clear work area.
• Position the saw so that the guide bar is perpendicular to the branch being cut.
• Allow the saw to reach full speed before engaging the chain with the wood.
• Apply light, consistent pressure. Do not force the saw through the wood; let the chain do the work.
• Be aware of kickback, especially when the tip of the guide bar contacts the wood.
• For larger branches, make an undercut first to prevent pinching and splintering.
• The saw is designed for branches up to 5 inches thick. Do not attempt to cut larger diameters.

Тэхнічнае абслугоўванне

1. Змазка ланцуга

Regularly check the oil level in the reservoir and refill with quality bar and chain oil. Proper lubrication is critical for chain performance and longevity. A visible oil film should be present on the chain during operation.

2. Завострыванне і замена ланцуга

A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it when necessary. Refer to the chain manufacturer's guidelines for proper sharpening angles and techniques. Always ensure the battery is removed before performing any chain maintenance.

3. Уборка і захоўванне

• After each use, remove the battery and clean the saw. Use a brush or compressed air to remove sawdust, debris, and sap from the guide bar, chain, and motor vents.
• Працярыце знешні выгляд рэкламайamp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.
• Apply a light coat of oil to the chain and guide bar before storing to prevent rust.
• Store the saw in a dry, secure location, out of reach of children. Use the protective bar sheath to cover the guide bar and chain.
• Захоўвайце акумулятар у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: X20-SAW-4A-BLK
• Марка: Сан Джо
• Крыніца харчавання: Харчаванне ад батарэі (20 В)
• Матор: 550W Brushed Motor
• Даўжыня накіроўвалай планкі: 5 цаляў
• Cutting Chain Length: 6 цаляў
• Максімальны дыяметр рэзкі: Да 5 цаляў
• акумулятар: 20V 4.0Ah Lithium-Ion (included)
• Вага: 3.8 фунта (толькі інструмент)
• Асаблівасці: Lightweight, Built-in Safety Features, Self-Lubricating System
• Памеры (Д х Ш х У): 16.3" x 5.4" x 8.7"

Гарантыя і падтрымка

This Sun Joe product is covered by a limited warranty. For detailed warranty information, product registration, or technical support, please visit the official Sun Joe webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

вытворца: Снежны Джо