Кіраўніцтвы па модулях і кіраўніцтвы карыстальніка

Кіраўніцтвы карыстальніка, кіраўніцтвы па ўсталёўцы, дапамога ў ліквідацыі непаладак і інфармацыя аб рамонце прадуктаў Module.

Парада: для найлепшага супадзення ўкажыце поўны нумар мадэлі, надрукаваны на этыкетцы модуля.

Кіраўніцтва па модулях

Апошнія паведамленні, папулярныя інструкцыі і інструкцыі, звязаныя з прадаўцамі, для гэтай маркі tag.

RECOM RACPRO1 Redundancy Module Instruction Manual

10 сакавіка 2026 г
RECOM RACPRO1 Redundancy Module Other applicable document: Important Safety Information ©RECOM Power GmbH. The information contained in these instructions and accompanying drawingsise the intellectual property of RECOM Power GmbH. This manual can change without prior notice. General information For your…

SKOV 136662 Main Module User Guide

9 сакавіка 2026 г
SKOV 136662 Main Module Product Information Specifications Configurable main module. Inputs: 7 x 0-10 V DC input impedance 2.1 MOhm. Pulsing Inputs (e.g., water meter, energy meter): Minimum pulse length: 75 ms. Minimum pulse interval: 75 ms. Maximum frequency/pulse per…

autani 80309 Core Manager Module Installation Guide

8 сакавіка 2026 г
autani 80309 Core Manager Module Introduction The Autani Manager with RTR+CR05 allows Energy Center® to communicate with Keilton+ autani devices. Presently, commissioning of these devices is managed exclusively by the iOS version of the Keilton+autani application. Users may commission Keilton+…

METZ CONNECT BMT-DIO4-2 Digital I-O Module Owner’s Manual

7 сакавіка 2026 г
METZ CONNECT BMT-DIO4-2 Digital I-O Module Product Specifications Feature Specification Digital Inputs 4 (configurable as contact or voltage inputs) Relay Outputs 2 (changeover contacts/DPDT) Communication Protocol BACnet MS/TP or Modbus RTU (model dependent) Bus Interface RS485 (two-wire bus) Operating Voltagэ...

OPTONICA 15367 Flexible Strip Module User Manual

6 сакавіка 2026 г
OPTONICA 15367 Flexible Strip Module Powered On Flexible strip-Module powered on Installation Instructions Be sure to turn off the power during installation, Otherwise, the lighting fixtures will be damaged After turning on the power, observe whether the lighting fixtures are…