KT3200 Timer Socket Thermostat Digital Temperature Controller User Manual

1. Уводзіны

The KETOTEK KT3200 is a versatile digital temperature controller integrated into a socket timer. It displays the measured temperature and allows users to set start and stop temperatures to control heating or cooling equipment. This device also features a time function for independent day and night temperature control. It is widely applicable in intelligent control systems for heating, refrigeration, brewing, reptile habitats, aquaculture, greenhouses, and general home use.

2. Папярэджанні па тэхніцы бяспекі

Please read these safety warnings carefully before operating the device.

• Before using this unit, inspect the plastic casing for any damage. Do not use the device if it appears damaged.
• The relay has a maximum capacity of 16A. For resistive loads, use less than 14A. For inductive loads, use less than 2A.
• Do not use this unit in environments with explosive gases, excessive steam, or high dust concentrations.
• Не дазваляйце дзецям кіраваць прыладай.
• Не спрабуйце самастойна разабраць прыладу.

3. Прадукт скончыўсяview і Памеры

3.1. Кампаненты прылады

• Кнопка M: Пераключыць рэжым працы
• Кнопка +: Павелічэнне значэння
• Кнопка ОК: Select / C°/F° key (Press for 3s to switch C/F)
• - Кнопка: Клавіша памяншэння
• Back / Reset Key: Для скіду націсніце 3 секунд
• Output Work Indicator: Light indicating output status.

3.2. Памеры

• Шырыня: 5.8 см
• Рост: 11.8 см
• Глыбіня: 3.2 см
• Памеры датчыка: 2.4 cm (length) x 0.5 cm (diameter)
• Даўжыня кабеля датчыка: 290 см (3 метра)

3.3. Available Plug Types

• Тып ЗША

  

• Тып ЕС

  

• Тып FR

  

• AU Type

  

• Тып Вялікабрытаніі

  

4. Рэжымы працы

The KT3200 offers three distinct operating modes to suit various temperature control and timing needs.

4.1. M1 TC: Temperature Control Mode

In this mode, the device controls heating or cooling based on a set start and stop temperature.

• Налада: Define a 'start temperature' and a 'stop temperature'.
• Рэжым нагрэву: Set the start temperature to be lower than the stop temperature. The device will activate the heating equipment when the measured temperature falls below the start temperature and deactivate it when it reaches the stop temperature.
• Рэжым астуджэння: Set the start temperature to be higher than the stop temperature. The device will activate the cooling equipment when the measured temperature rises above the start temperature and deactivate it when it falls to the stop temperature.

4.2. M2 TC+Timer: Day/Night Temperature Control

This mode allows for different temperature control settings during daytime and nighttime periods within a 24-hour cycle.

• Налада: Set the current clock, Time 1 (start of day period), Time 2 (start of night period), TC 1 (temperature control settings for day), and TC 2 (temperature control settings for night).
• Аперацыя: During the daytime period (from Time 1 to Time 2), the device will operate according to the TC 1 program. During the nighttime period (from Time 2 to Time 1), it will switch to the TC 2 program.

4.3. M3 Timer: 2 Timer Period Timer Only

This mode functions purely as a timer, controlling the output based on two set time periods.

• Налада: Set the current clock, Time 1 (ON start time), and Time 2 (OFF start time).
• Аперацыя: The output will be ON during the period from Time 1 to Time 2. The output will be OFF during the period from Time 2 to Time 1.

5. Тэхнічныя характарыстыкі

6. Тэхнічнае абслугоўванне

To ensure the longevity and accurate performance of your KT3200 thermostat, follow these simple maintenance guidelines:

• Уборка: Gently wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casinг і электронныя кампаненты.
• Сыход за датчыкам: Keep the temperature sensor clean and free from debris. Ensure it is not exposed to extreme physical stress or sharp objects that could damage the cable or probe.
• захоўванне: Калі прылада не выкарыстоўваецца працяглы час, захоўвайце яе ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.

7. Выпраўленне непаладак

If you encounter issues with your KT3200 thermostat, consider the following troubleshooting steps:

• Прылада не ўключаецца: Ensure the device is securely plugged into a functional power outlet. Check the power supply voltage to ensure it is within the specified range (100~250VAC).
• Няправільныя паказанні тэмпературы: Verify that the temperature sensor is properly connected and positioned in the area where temperature needs to be measured. Ensure the sensor is not damaged. You may use the temperature calibration function if you suspect a consistent offset.
• Output Not Activating/Deactivating: Check your set start and stop temperatures or timer settings (Time 1, Time 2) to ensure they are configured correctly for your desired operation. Confirm that the connected appliance is working correctly.
• Прылада не адказвае: Try performing a reset by pressing the 'Back / Reset' key for 3 seconds. This will revert settings to default, so reconfigure as needed.
• Праблемы з функцыяй памяці: Remember that only the clock needs to be reset after a power failure if the device was in M2 or M3 mode. All other data is saved.

Калі пасля выканання гэтых крокаў праблемы не знікнуць, звярніцеся ў службу падтрымкі кліентаў.

8. Карыстальніцкія парады

• Магутнасцьtage Аднаўленне: The KT3200 features a memory function that saves all settings except the clock after a power failure. If operating in M2 (Temperature Control + Timer) or M3 (Timer Only) mode, remember to reset the clock upon power restoration. If in M1 (Temperature Control) mode, the device will automatically resume operation.
• Пераключэнне адзінак тэмпературы: Easily switch between Celsius (℃) and Fahrenheit (℉) by pressing the 'OK' button for 3 seconds.
• Універсальнасць прымянення: This thermostat is highly versatile and can be used for various applications such as controlling heaters in a room, maintaining optimal temperatures in incubators, regulating aquarium temperatures, or managing climate in greenhouses.

9. Гарантыя і падтрымка

The KT3200 Timer Socket Thermostat comes with a 6-month warranty from the date of purchase.

For any inquiries or support needs, please contact our customer service. All emails will be answered within 1 business day. We are committed to providing assistance and resolving any issues you may encounter with your product.