1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of the Skydance S1-B AC Triac RF + Push Dimmer and the Skydance R1 Remote Controller. The S1-B dimmer is designed for dimming and switching single-color dimmable LED lamps, traditional incandescent, and halogen lights. It utilizes 2.4GHz wireless technology for remote control and can also function as an RF switch. The R1 remote is specifically designed to work with the S1-B dimmer for wireless control.
Заўвага:
- The R1 remote requires the S1-B dimmer to function; it cannot be used independently.
- The S1-B dimmer can operate without the remote, but in a static mode without dimming effects.
- The R1 remote requires a CR2032 battery (not included).
Image 1.1: Skydance S1-B Dimmer and R1 Remote Controller.
2. Інфармацыя па бяспецы
- The product must be installed and serviced by a qualified person.
- This product is not waterproof. Avoid exposure to direct sunlight and rain.
- Ensure good heat dissipation and ventilation to prolong the controller's working life.
- Пераканайцеся, што выхадны аб'ёмtage of any connected power supplies complies with the product's working voltage.
- Ensure all wire connections and polarities are correct and secure before applying power to prevent damage to LED lights.
- If a fault occurs, return the product to your supplier. Do not attempt to fix this product yourself.
3. Кампаненты прадукту
- Skydance S1-B AC Triac RF + Push Dimmer
- Skydance R1 Remote Controller
4. Тэхнічныя характарыстыкі
4.1 S1-B Dimmer
| Параметр | Каштоўнасць |
|---|---|
| мадэль | S1-B |
| Уваходны кнtage | 100-240 В пераменнага току |
| Выхад Voltage | 100-240 В пераменнага току |
| Выхадны ток | 1.0А |
| Выходная магутнасць | 100-240W |
| Працоўная тэмпература | -30°C ~ +55°C |
| Памеры (Д×Ш×У) | 52.00 мм × 52.00 мм × 26.00 мм |
| Кантраляваны метад | 2.4G РФ |
| Матэрыял | АБС |
| Атэстацыя | CE, ROHS, CCC |
Image 4.1: S1-B Dimmer dimensions (top and side view).
Image 4.2: Technical parameters for S1-B and SS-B (for reference, this manual focuses on S1-B).
4.2 R1 Remote Controller
| Параметр | Каштоўнасць |
|---|---|
| Выхадны сігнал | ВЧ (2.4 ГГц) |
| Рабочы выпtage | 3 В пастаяннага току (батарэя CR2032) |
| Працоўны ток | <20 мА |
| Ток у рэжыме чакання | <4 мкА |
| Час чакання | 12 месяцаў |
| Аддаленае адлегласць | 30м |
| Памеры (Д×Ш×У) | 135 мм × 40 мм × 11 мм |
| Вага | 41 г |
Image 4.3: R1 Remote Controller technical parameters and dimensions.
5. Ўстаноўка і налада
5.1 Электрычная схема
Ensure all wiring is performed by a qualified professional and that power is disconnected before installation.
Image 5.1: Wiring diagrams for S1-B connecting with a dimmable LED light (left) and a dimmable LED driver (right).
5.2 DIP Switch Settings for S1-B
The S1-B dimmer features DIP switches for configuration. Caution: Before powering on, you must confirm the selection of the DIP switch.
Image 5.2: S1-B DIP switch settings.
- DIP Switch 1: Dimmer / Switch Function
▲ (ON): Dimmer function
▼ (OFF): Switch function (DIP switches 2-3 are invalid in switch mode). - DIP Switch 2: Forward-phase / Reverse-phase
▲ (ON): Forward-phase control dimmer (TRIAC)
▼ (OFF): Reverse-phase control dimmer
Select leading edge dimming or trailing edge dimming according to your dimmable LED light. - DIP Switch 3: Minimum Brightness
▲ (ON): 20% Min bright
▼ (OFF): 10% Min bright (default)
If the light flickers under 10% brightness, switch to 20% Min bright. If flickering persists under 20% brightness, contact your supplier for customization.
6. Аперацыя
6.1 R1 Remote Controller Functions
Before first use, pull out the plastic battery barrier sheet from the battery compartment located on the bottom of the remote.
Image 6.1: R1 Dimming Remote button functions.
- Укл/Выкл: Уключэнне або выключэнне.
- Small Night Light: Activates a low brightness setting.
- Brightness Presets (25%, 50%, 75%, 100%): Directly set brightness levels.
- Яркасць +/-: Short press for 10 levels of adjustment. Long press (1-5 seconds) for continuous 256 levels of adjustment.
- Scene 1 (S1) / Scene 2 (S2): Short press to run a saved scene. Long press (2 seconds) to save the current brightness setting as a scene.
6.2 Push Switch Function (Optional)
If a push switch is connected to the S1-B dimmer:
- Кароткае націсканне: Уключае або выключае святло.
- Доўгі націск (1-5 секунд): When the light is on, continuously increases or decreases brightness.
- Доўгі націск (10 секунды): When multiple dimmers share a push switch, this achieves simultaneous adjustment across all connected dimmers.
7. Matching Guide
The S1-B dimmer can be matched with a 2.4G RF remote controller, dimming driver, smart lamp, or panel controller.
Image 7.1: General Match guide for RF controllers.
7.1 Match with Controller (with Match Key)
- Матч: Short press the match key on the RF switch. Within 5 seconds, press any zone key or the on/off key of the remote.
- Выдаліць: Long press the match key on the RF switch for 5 seconds to delete all matched remotes.
7.2 Match with Controller (without Match Key), Dimming Driver, or Smart Lamp
- Матч: Switch off the power, then switch on the power again. Within 5 seconds after power on, quickly press the on/off key or a zone key on the remote 3 times. The link is successful when the light blinks 3 times.
- Выдаліць: Switch off the power, then switch on the power again. Within 5 seconds after power on, quickly press the on/off key or a zone key on the remote 5 times. The unlink is successful when the light blinks 5 times.
7.3 Match with Panel Controller
- Матч: Turn on the light, then turn it off. Immediately press the on/off key for 5 seconds. Within 5 seconds, press the on/off key or a zone key of the remote.
- Выдаліць: Turn on the light, then turn it off. Immediately press the on/off key for 10 seconds to delete all matched remotes.
Image 7.2: Interface specifications for S1-B and SS-B (for reference, this manual focuses on S1-B).
8. Выпраўленне непаладак
Refer to the table below for common malfunctions and their solutions.
| Няспраўнасць | Прычыны | Ліквідацыю непаладак |
|---|---|---|
| Святла няма |
|
|
| Няма адказу з пульта |
|
|
9. Карыстальніцкія парады
- Always ensure the LED lights or drivers you intend to use are dimmable and compatible with Triac (phase-cut) dimmers.
- For optimal performance and longevity, ensure the dimmer is installed in a location with adequate ventilation to prevent overheating.
- When setting up multiple dimmers, consider using the long press (10s) function on a shared push switch for synchronized adjustment.
10. Тэхнічнае абслугоўванне
- Keep the dimmer and remote clean and dry. Avoid using harsh chemicals for cleaning.
- As the product is not waterproof, protect it from moisture and direct exposure to the elements.
- For the R1 remote, replace the CR2032 battery annually or when performance degrades.
- Ensure proper ventilation around the dimmer to maintain good heat dissipation.
11. Гарантыя і падтрымка
The Skydance S1-B Dimmer and R1 Remote come with a Гарантыя 2 год. In case of any malfunction or defect, please contact your supplier or the point of purchase for support. Do not attempt to repair the product yourself, as this may void the warranty and pose safety risks.
