SIMICAM 4K PoE/DC IP Camera

SIMICAM 4K PoE/DC IP Camera User Manual

Model: 4K PoE/DC IP Camera

Марка: SIMICAM

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your SIMICAM 4K PoE/DC IP Camera. This camera offers high-definition surveillance with options for Power over Ethernet (PoE) or DC 12V power supply, infrared night vision, and audio recording. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

Заўвага: Our cameras are compatible with the ONVIF protocol and can easily integrate with ONVIF NVRs. The camera supports multiple power options, including DC12V and PoE 48V.

2. Інфармацыя па бяспецы

⚠️ Адмова ад адказнасці:

Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. Змесціва ўпакоўкі

Калі ласка, уважліва праверце змесціва пакета. Калі якія-небудзь прадметы адсутнічаюць або пашкоджаныя, звярніцеся ў службу падтрымкі кліентаў.

  • SIMICAM IP Camera
  • Waterproof Hat
  • Шрубы для ўстаноўкі
Image showing the SIMICAM IP camera, a waterproof hat, and screws, which are the typical package contents.
Малюнак 1: Змест пакета

4. Тэхнічныя характарыстыкі

АсаблівасцьАпісанне
Фірмовае найменнеSIMICAM
Высокая выразнасць4.0 Megapixels (up to 8MP 4K)
Мегапікселі8 МП
стыльКулявая камера
СувязьRJ45 (Ethernet)
ЭлектразабеспячэннеWith PoE (48V) or DC 12V
Аб'ектыў (мм)3.6mm, 6mm, 8mm (options available)
Viewing кут90°
Адлегласць ІЧ-выпраменьвання (м)20-30M (up to 150 feet)
Мінімальная асветленасць (люкс)0.01lux
Фармат сціску відэаH.265
АсаблівасціWaterproof / Weatherproof (IP66), Audio Record, HDR, 3DNR
Рэйтынг IPIP66
СцэнаУ памяшканні і на адкрытым паветры
Матэрыял абалонкіПластыкавыя
КолерБЕЛЫ
Памеры (Д х Ш х Г) (мм)12*8*8
Унутраная памяцьНяма
Падтрымліваюцца аперацыйныя сістэмыNo (refers to direct OS support, typically managed via NVR/software)
АтэстацыяCE
Image comparing 2MP, 4MP, 5MP, and 8MP 4K resolutions, showing the increased detail with higher megapixels.
Figure 2: Resolution Comparison
Diagram illustrating different lens focal lengths (2.8mm, 3.6mm, 4mm, 6mm, 8mm, 12mm) and their corresponding face recognition distances.
Figure 3: Camera Lens Focal Lengths and Viewінг адлегласцей

5. Інструкцыі па ўсталёўцы

5.1. Падключэнне камеры

The SIMICAM IP Camera supports both Power over Ethernet (PoE) and DC 12V power supply. Ensure your network infrastructure (NVR or PoE Switch) is compatible with the chosen power method.

5.1.1. Working with PoE NVR

For PoE cameras, a single Ethernet cable connects the camera to the PoE NVR, providing both power and data transmission. The NVR then connects to a monitor (via HDMI or VGA) and your network (for remote viewing).

Wiring diagram showing a PoE camera connected to a PoE NVR via an Ethernet cable. The NVR is connected to a power supply, a network router, and a monitor via HDMI/VGA. It also shows connections for audio out and a mouse.
Figure 4: Wiring with PoE NVR

5.1.2. Working with PoE Switch

Alternatively, a PoE camera can be powered by a PoE switch. The camera connects to the PoE switch, which then connects to your NVR (if used) and router. The NVR (if used) connects to a monitor and its own power supply.

Wiring diagram showing a PoE camera connected to a PoE switch, which then connects to a router and an NVR. The NVR is connected to a power supply and a monitor. This setup also illustrates ONVIF compatibility with Dahua, Hikvision, and SIMICAM NVRs, and mobile app support for Android, iOS, and Windows.
Figure 5: Wiring with PoE Switch and ONVIF Compatibility

5.1.3. DC 12V Power Option

If not using PoE, the camera requires a 12V DC power adapter (not included) and an Ethernet connection to a router. PoE cameras can also be powered by 12V DC if a PoE NVR or switch is not used.

5.2. NVR Compatibility

The SIMICAM IP Camera supports ONVIF protocol versions 2.0-2.4, ensuring compatibility with NVRs from various brands including Dahua, Hikvision, and SIMICAM.

5.3. Initial IP Address Configuration

By default, the camera is set to DHCP to obtain an IP address automatically. For system settings, it is recommended to use the Windows IE browser. You may need to install a browser plug-in for the first visit.

To modify the camera's IP address, use the IPCBatchTool software. You can download it from www.vatilon.com (SERVICE -> WIFI Cam Software Download -> IPCBatchTool.zip).

  1. Падключыце камеру да вашай сеткі.
  2. Launch the IPCBatchTool.
  3. Пошук the camera's IP.
  4. You can set a fixed IP for the camera. Ensure the camera's IP network segment is consistent with your NVR, computer, and LAN to avoid conflicts. For example, if your camera IP is 192.168.1.10, the network segment is "1", and all other devices on the network should also be in the "1" segment.
Screenshot of IPCBatchTool showing how to modify the camera's IP address, including fields for IP, Subnet Mask, and Gateway.
Figure 6: Modifying IP Address with IPCBatchTool

6. Інструкцыя па эксплуатацыі

6.1. Accessing Camera Settings via Browser

To access the camera's settings, open Internet Explorer (IE) browser and enter the camera's IP address in the address bar. The default username is admin і пароль па змаўчанні 123456. You may need to install a browser plug-in for the first visit.

6.2. Рэжымы начнога бачання

The camera offers several night vision modes:

  • Infrared Light On: Black and white video.
  • Белае святло ўключана: Full color video.
  • Dual Light Mode: Infrared light is on (black and white video) when no one is present. When motion is detected, the white light turns on, and the video becomes full color.

6.3. Аўдыёзапіс

The camera features a built-in microphone, allowing it to record audio along with video. This provides authentic sound video recording for enhanced surveillance.

Image showing a SIMICAM camera with a microphone icon and sound waves, indicating its audio recording capability.
Малюнак 7: Функцыя запісу аўдыё

6.4. Video Compression (H.265)

The camera utilizes advanced H.265 video compression, which offers clearer HD resolution at a lower bit rate. This reduces file size by 40%-50%, saving storage space on your HDD and improving transmission speed compared to H.264.

Comparison image showing H.264 vs H.265 video compression. H.265 uses less hard disk space (40% vs 90% for H.264) and offers faster transmission speed and clearer picture quality.
Figure 8: H.265 vs H.264 Compression

6.5. Enhanced Image Features (HDR & 3DNR)

  • HDR (шырокі дынамічны дыяпазон): Ensures important details are captured regardless of lighting conditions by automatically adjusting picture brightness for optimized, highly-detailed security video.
  • 3DNR (Digital Noise Reduction): Filters out noise from low-light settings and motion, providing a cleaner, more accurate image with better clarity, sharpness, and improved motion detection. It also reduces video file памеры.
Image illustrating High Dynamic Range (HDR) technology, showing a house with balanced lighting despite bright and dark areas.
Малюнак 9: Высокі дынамічны дыяпазон (HDR)
Image illustrating Digital Noise Reduction (DNR) technology, showing a clear image of a train station at night compared to a grainy one.
Figure 10: Digital Noise Reduction (DNR)

6.6. Motion Detection and Alarm Settings

The camera supports smart motion detection. You can configure specific motion detecting zones and adjust sensitivity to reduce false alerts. When danger is detected, the camera can trigger alerts by sending email notifications.

To configure alarm settings:

  1. Access camera settings via browser.
  2. Перайсці да Менеджэр сігналізацыі.
  3. Уключыць Дэтэктар руху or Выяўленне чалавека.
  4. Set a schedule for when detection should be active.
  5. Вызначце Рэгіён for alarm warning areas.
  6. Адрэгулюйце Адчувальнасць (1-100).
  7. Configure actions like Send To Client, Адправіць ліст, Send To FTP, Гукавы выхад, Святлоаддача, або Alarm-out Enable.

6.7. Email Alarm Setup

To receive email alerts:

  1. Access camera settings via browser.
  2. Перайсці да Network Manager > Email Setting.
  3. Уключыць Email Enable.
  4. Enter your email server details (e.g., smtp.163.com), port (e.g., 465), and select encryption type (e.g., ssl).
  5. Provide your email username and the email third-party login authorization code (password).
  6. Enter sender and recipient email addresses.
  7. Націсніце Адправіць тэставы ліст to verify settings.

6.8. Time Zone and Time Settings

Ensure the camera's time and date are accurate for proper recording and event logging.

  1. Access camera settings via browser.
  2. Перайсці да System Manager > Time Setting.
  3. Уключыць Уключыць NTP і ўсталяваць NTP -сервер (напрыклад, time.windows.com).
  4. Адрэгулюйце Часавы пояс to match your local region.
  5. Усталюйце бягучую дату і час.

6.9. Mobile App Setup (Watilon)

Для аддаленага viewing and control, use the "Watilon" app.

  1. Спампаваць прыкладанне:
    • iPhone: Search "Watilon" in the Apple App Store.
    • Android: Scan the QR code below to install "Watilon".
    QR code for downloading the Watilon Android app.
    Figure 11: Watilon Android App QR Code
  2. Connect to Local Network:
    • Connect the camera to your LAN switch/router.
    • On your mobile device, turn off mobile data, turn on Wi-Fi, and connect to the same local area network as the camera.
  3. Register and Add Camera:
    • Register a user account and set a password within the app.
    • Add the camera equipment to the app.

    Важна: The camera's IP network segment must be the same as the LAN your mobile device is connected to, otherwise the camera IP cannot be searched by the app.

Video 1: Sample camera footage demonstrating video quality and motion.

7. Тэхнічнае абслугоўванне

  • Уборка: Рэгулярна працірайце аб'ектыў камеры мяккай сухой тканінай, каб забяспечыць выразную якасць выявы. Пазбягайце абразіўных ачышчальнікаў.
  • Абарона ад надвор'я: The camera is IP66 rated for outdoor use, designed to withstand rain, snow, and extreme temperatures (-40°C to 50°C). However, avoid directing high-pressure water jets directly at the camera.
  • Абнаўленні прашыўкі: Праверце вытворцы webперыядычна правяраць сайт на наяўнасць абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і бяспеку.
  • Кабельнае кіраванне: Ensure all cables are securely connected and protected from environmental damage.
Image showing the SIMICAM bullet camera being hit by rain, with icons for cloud, snowflake, and sun, and temperature ranges from -40°C to 50°C, highlighting its waterproof and weather-resistant features.
Figure 12: Weather Resistance (IP66)

8. Выпраўленне непаладак

Q: Cannot connect to the camera via mobile app (Watilon).
A: Ensure your mobile device is connected to the same local Wi-Fi network as the camera, and that mobile data is turned off. Verify that the camera's IP network segment is consistent with your LAN. If the issue persists, try resetting the camera.
Q: Якія імя карыстальніка і пароль па змаўчанні?
A: Імя карыстальніка па змаўчанні admin і пароль па змаўчанні 123456.
Пытанне: Як выканаць скід да заводскіх налад?
A: A factory reset can typically be initiated through the camera's web interface under System Manager > System Maintenance > Simple Recovery or Full Recovery. If you encounter difficulties, please contact technical support.
Q: Is the camera Wi-Fi enabled?
A: No, the camera uses an RJ45 Ethernet connection for connectivity and does not support Wi-Fi.
Q: Does the camera record to an SD card?
A: No, this model does not have internal storage for SD card recording. It is designed to record to an NVR or other network storage solutions.
Q: Can this camera be used with a DVR?
A: This is an IP camera and is designed to work with Network Video Recorders (NVRs), not Digital Video Recorders (DVRs) which typically use analog BNC connections.
Q: Can I use the camera without an NVR, just with a router and app?
A: Yes, you can connect the camera directly to a router via RJ45 and use the mobile app for live viewing. However, for 24/7 recording and advanced features, an NVR is recommended.

9. Карыстальніцкія парады

  • For optimal 4K resolution, ensure your NVR is also 4K compatible. If your NVR is 5MP/4MP/1080P, the camera's output will be limited to that resolution.
  • Always ensure the camera's IP network segment matches your local network for seamless discovery and connection, especially when using tools like IPCBatchTool or the mobile app.
  • Consider using a PoE NVR for a simpler setup with a single cable for power and data, and for reliable 24/7 recording.
  • Regularly check the camera's web interface for motion detection settings and email alarm configurations to ensure your surveillance system is active and sending alerts as desired.

10. Гарантыя і падтрымка

Each camera is tested before shipping. If you encounter any difficulties or require technical support, please contact us via email. We aim to reply within 48 hours.

Кантакты тэхнічнай падтрымкі:

  • Адрас электроннай пошты 1: 454400423@qq.com
  • Адрас электроннай пошты 2: m15800032384@163.com
  • Адрас электроннай пошты 3: 453836824@qq.com

For the latest updates and information, please refer to the official product page or contact support.

Кіраўніцтва карыстальніка (PDF): View PDF Кіраўніцтва


Documents - HIPC – 4K PoE/DC IP Camera

няма адпаведных дакументаў