1. Уводзіны
This manual provides essential information for the safe and effective use of your Japan Nidec 24H Brushless Servo Motor. This motor features a built-in drive and 100-line dual-channel encoder, making it suitable for high-precision control applications. Please read this manual thoroughly before operation.
2. Бяспека і папярэджанні
- Do not operate the motor under overload (stall) conditions, as this may easily damage the motor.
- Select a power supply with appropriate voltagе (DC).
- If the load exceeds the rated value, the rotational speed will decrease.
- Operating near the stall torque limit may cause internal damage.
- Reducing the rotational speed will result in decreased output torque.
- It is strictly forbidden to make mistakes regarding the positive and negative connections of the brushless motor.
- Always use a regulated, non-surge DC power supply (e.g., a battery or regulated power supply).
Папярэджанне аб небяспецы ўдушша
This product may contain small parts. Keep out of reach of children under 3 years to prevent choking hazards.
3. Прадукт скончыўсяview
The Nidec 24H Brushless Servo Motor is a compact and powerful motor designed for precision applications. It features an integrated brushless driver and a 100-line encoder for accurate feedback and control.
4. Тэхнічныя характарыстыкі
Агульныя ўласцівасці
- Тып: Мікраматор
- Commutation: Бесщеточный
- Паходжанне: Кантынентальны Кітай
- сертыфікацыя: CCC
- Умова: Used (dismantled, tested and in perfect working order)
Электрычныя дадзеныя
| тtage | Ток без нагрузкі | Хуткасць без нагрузкі |
|---|---|---|
| 9 В пастаяннага току | 70 мА | 2246 XNUMX абаротаў у хвіліну |
| 12 В пастаяннага току | 80 мА | 3020 XNUMX абаротаў у хвіліну |
| 24 В пастаяннага току | 100 мА | 6100 XNUMX абаротаў у хвіліну |
Памеры
Інфармацыя аб пакеце
- Вага: 0.15 кг
- Памеры (Д х Ш х У): 9 см х 9 см х 9 см
5. Настройка
Інструкцыі па праводцы
Refer to the wiring diagram below for proper connections. Ensure all connections are secure before applying power.
- Чырвоны провад: Харчаванне станоўчае
- Чорны провад: Адмоўны блок харчавання
- Жоўты провад: Start/Stop (Connect to positive power supply via a 1k resistor; below 12V, no resistor needed)
- White Wire (PWM): PWM signal speed control (Connect to negative for high speed; input 20KHz pulse width signal for speed regulation)
- Зялёны провад: Forward-reverse switching (Connect to negative to switch direction)
- Brown Wires (Signal A, Signal B): Кадавальнік сігналаў
- Аранжавы провад: Encoder power supply 5V
Мантаж
The motor bracket can be removed if necessary for custom mounting solutions.
6. Інструкцыя па эксплуатацыі
Базавая аперацыя
- Connect the red wire to the positive pole and the black wire to the negative pole of your DC power supply.
- Connect the yellow 'Start' line to the positive power supply via a 1k resistor. If operating below 12V, a resistor is not required.
- To run at high speed, connect the white PWM line directly to the negative pole.
- For speed regulation, input a 20KHz pulse width modulation (PWM) signal to the white line.
- To switch between forward and reverse rotation, connect the green line to the negative pole. It is recommended to stop the motor before switching direction to prevent instantaneous surges.
- The encoder requires a 5V power supply connected to the orange wire. If the encoder is not needed, this connection can be ignored.
7. Тэхнічнае абслугоўванне
This brushless servo motor is designed for low maintenance. Keep the motor clean and free from dust and debris. Ensure proper ventilation to prevent overheating. No specific user-serviceable parts are inside.
8. Выпраўленне непаладак
- Motor not starting or erratic operation: Check all wiring connections for correctness, especially positive/negative polarity. Ensure the power supply is regulated and within the specified voltage дыяпазон (9V-24V DC).
- Перагрэў рухавіка: Reduce the load on the motor. Ensure it is not operating under stall conditions. Verify that the power supply voltage is correct and not exceeding 24V.
- Reduced speed or torque: The load might be exceeding the motor's rated value. Reduce the load or ensure the motor is not operating near its stall torque limit.
- No encoder feedback: Ensure the encoder's 5V power supply (orange wire) is correctly connected.
9. Карыстальніцкія парады
- Кабелі: This motor is typically sold without connecting cables. You will need to source appropriate wires and connectors for your application.
- Shaft Dimensions: For precise integration, carefully measure the helical portion of the shaft if specific dimensions are critical for your project. The shaft diameter is 6mm and length is 18.5mm.
- Умова: As these motors are often used and dismantled, minor cosmetic imperfections like oxidation or rust spots may be present, but they are tested for perfect working order.
10. Гарантыя і падтрымка
For detailed information regarding the manufacturer and EU representative, please refer to the original user manual PDF.
вытворца: Dongguan Haodarong Trading Co., Ltd
Адрас: Room406, No.11, Jiaoyu Road, Dongcheng Street, Dongguan, China
Кантактная асоба: Liao Jiansheng
электронная пошта: mox0903@163.com
Адказная асоба ЕС: QTEC EUREP GMBH
Адрас: CURTIUSSTRASSE 27, 23568 LUEBECK, Germany
электронная пошта: Cpcs@cpcs-tlab.hk
тэлефон: +852-53700017
Падрабязнае кіраўніцтва карыстальніка ў фармаце PDF даступна для запампоўкі: View Кіраўніцтва карыстальніка (PDF)