Turbo Racing P32-S 91803G-C 2.4G 4CH Radio Transmitter User Manual

1. Уводзіны

This manual provides detailed instructions for the operation and maintenance of your Turbo Racing P32-S 91803G-C 2.4G 4CH Radio Transmitter and RX41 Receiver. Please read this manual thoroughly before use to ensure proper function and to maximize your enjoyment of the product.

2. Асаблівасці прадукту

• 2.4GHz 4-channel VT system for reliable control.
• Removable handle for easy portability and storage.
• Integrated LCD display for clear parameter viewing and adjustment.
• SVC Gyro intelligent vehicle control function for enhanced stability.
• Waterproof RX41 receiver for use in various conditions.
• Low battery warning system (below 4.5V).
• Fail-safe function for added security.
• Supports 15 model memories.
• Adjustable D/R (Dual Rate) for throttle and steering.
• Other functional settings: EXP (Exponential), REV (Reverse), EPA (End Point Adjustment), TRIM.
• ABS (Anti-lock Braking System) function for improved braking control.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе пералічаныя ніжэй прадметы наяўныя і знаходзяцца ў добрым стане:

• 1 x P32-S 91803G-C Transmitter
• 1 x RX41 Receiver
• 1 x Silicone Case for handle (Random color)
• 1 х Кіраўніцтва карыстальніка (гэты дакумент)
• 1 х пакетная скрынка

4. Тэхнічныя характарыстыкі

5. Настройка

5.1 Handle Installation/Removal

The transmitter's handle is designed to be removable for convenience. Follow these steps:

1. Press the disassemblable button located on the back of the handle.
2. Gently remove the handle from the main body of the transmitter.
3. To install, align the handle with the transmitter body and press the disassemblable button while sliding the handle into place until it clicks securely.

5.2 Устаноўка батарэі

The transmitter requires 4 AAA batteries. Ensure correct polarity when inserting the batteries.

1. Знайдзіце батарэйны адсек у ніжняй частцы ручкі перадатчыка.
2. Адкрыйце крышку батарэйнага адсека.
3. Insert 4 AAA batteries, paying attention to the positive (+) and negative (-) markings.
4. Надзейна зачыніце крышку батарэйнага адсека.

Папярэджанне: не сумяшчайце старыя і новыя батарэі. Не змешвайце шчолачныя, стандартныя (вугляродна-цынкавыя) або акумулятарныя (нікель-кадміевыя) батарэі.

5.3 Падключэнне і прывязка прымача

Connect the RX41 receiver to your RC vehicle's ESC and steering servo. Refer to your vehicle's manual for specific wiring diagrams. The receiver and transmitter are typically pre-bound from the factory. If re-binding is necessary:

1. Пераканайцеся, што і перадатчык, і прыёмнік выключаны.
2. Connect the bind plug (not included, usually comes with the vehicle) to the 'BIND' port on the RX41 receiver.
3. Power on the receiver. The LED on the receiver should flash rapidly.
4. While holding the 'BIND' button on the transmitter (if available, otherwise refer to specific binding instructions for P32-S), power on the transmitter.
5. Release the 'BIND' button on the transmitter once the receiver's LED turns solid, indicating a successful bind.
6. Power off both the transmitter and receiver, then remove the bind plug from the receiver.
7. Power on the transmitter first, then the receiver, to confirm the connection.

6. Інструкцыя па эксплуатацыі

6.1 Кіраванне перадатчыкамview

• Антэна: Transmits the 2.4GHz signal.
• Стырно: Controls the steering of your RC vehicle.
• Курок дросельнай засланкі: Controls forward/reverse movement and speed.
• Disassemblable Key: Used for handle removal/installation.
• Акумулятар: Змяшчае батарэйкі тыпу ААА.
• ВК-дысплей: Shows current settings, voltage, and model name.
• ST Trim +/-: Adjusts the steering neutral position.
• TRIM +/-: Adjusts the throttle neutral position.
• SEL/CH Button: Selects channels or menu options.
• Кнопкі +/-: Adjusts values in menu settings.
• Кнопка харчавання (УКЛ./ВЫКЛ.): Turns the transmitter on or off.

6.2 LCD-дысплей і навігацыя па меню

The LCD display provides real-time information and allows for parameter adjustments. Use the SEL/CH, +, and - buttons to navigate and modify settings.

The display typically shows:

• Бягучы абtage пульта дыстанцыйнага кіравання.
• Name of the current model.
• Channel status (e.g., CH1, CH2, CH3, CH4).

To access and adjust parameters, press the SEL/CH button to cycle through options, and use the +/- buttons to change values. Refer to the on-screen prompts for specific menu functions.

6.3 Пашыраныя функцыі

• D/R (падвойная хуткасць): Adjusts the maximum steering angle and throttle output. Useful for tuning vehicle response.
• EXP (экспанентная): Modifies the sensitivity of steering and throttle around the center point. Higher EXP values make control less sensitive near center.
• REV (задні ход): Reverses the direction of a channel's output. Use if your steering or throttle responds in the opposite direction.
• EPA (карэкціроўка канчатковай кропкі): Sets the maximum travel for each servo. Prevents over-stressing servos and mechanical linkages.
• АБРАБЛЕННЕ: Дакладна наладжвае нейтральнае становішча руля і дросельнай засланкі.
• ABS (антыблакіровачная сістэма тармазоў): This function throttles the output channel for automatic brake setting, adapting to different types of race tracks and operating habits. It aims to achieve the best braking effect and control during cornering, preventing swing tail and loss of turning angle.

7. Тэхнічнае абслугоўванне

• Уборка: Выкарыстоўвайце мяккую сухую тканіну для чысткі перадатчыка і прыёмніка. Пазбягайце выкарыстання растваральнікаў або агрэсіўных хімічных рэчываў.
• захоўванне: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
• Сыход за батарэяй: Replace AAA batteries when the low battery warning activates. Dispose of used batteries responsibly.
• Абарона прымача: Although the RX41 receiver is waterproof, avoid prolonged submersion or exposure to corrosive liquids. Ensure all connections are dry before powering on.
• Сыход за антэнай: Do not bend or cut the receiver antenna. Ensure it is positioned correctly for optimal signal reception.

8. Выпраўленне непаладак

9. Карыстальніцкія парады

• Тэставанне дыяпазону: Always perform a range test in a safe area before operating your RC vehicle at full distance, especially after changing batteries or making adjustments.
• Экалагічная дасведчанасць: While the receiver is waterproof, avoid intentionally submerging it or exposing it to harsh chemicals. Always dry it thoroughly after exposure to moisture.
• Памяць мадэлі: Utilize the 15 model memory slots if you have multiple RC vehicles. This allows for quick switching between different vehicle settings without re-calibration.
• ABS Function: Experiment with the ABS settings to find the optimal braking performance for your specific vehicle and driving surface. It can significantly improve control during aggressive braking and cornering.
• Handle Portability: Вазьміце авансtage of the removable handle for easier transport and storage, especially when space is limited.

10. Сертыфікаты

The Turbo Racing P32-S 91803G-C transmitter and RX41 receiver comply with relevant international standards.

• Сертыфікавана CE: Conforms with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
• Адпаведнасць FCC: Meets the standards for electromagnetic compatibility set by the Federal Communications Commission in the United States.

11. Гарантыя і падтрымка

For any issues or questions regarding your Turbo Racing P32-S 91803G-C transmitter and RX41 receiver, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Please note that warranty coverage typically does not include damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.