1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your EBIKE Brushless Motor Controller, Model X759-AAM001. This controller is designed for electric bicycles, offering efficient speed control and compatibility with KDS display meters. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Інфармацыя па бяспецы
- Always disconnect the battery power before performing any installation, maintenance, or repair work on the controller or associated components.
- Пераканайцеся, што ўсе злучэнні надзейныя і належным чынам ізаляваныя, каб пазбегнуць кароткага замыкання.
- Не спрабуйце адкрываць або мадыфікаваць кантролер casing, as this may void the warranty and cause damage or injury.
- Keep the controller away from water, excessive heat, and direct sunlight.
- Для аптымальнай прадукцыйнасці і бяспекі рэкамендуецца прафесійная ўстаноўка.
- Пераканайцеся, што тtage and current ratings of your e-bike system are compatible with this controller (48V, 18A).
3. Змесціва ўпакоўкі
У пакунку павінен быць наступны прадмет:
- 1 x EBIKE Brushless Motor Controller (Model X759-AAM001)
4. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| мадэль | X759-AAM001 |
| Тып | Кантралёр |
| Акумулятар Voltage | 48В |
| Зрэз Voltage | 39В |
| Ліміт току | 18А |
| Display Meter Compatibility | KDS |
| Паходжанне | Кантынентальны Кітай |
| Хімічнае рэчыва, якое выклікае вялікую заклапочанасць | Няма |
| Прыблізныя памеры (Д х Ш х В) | 91 мм х 50 мм х 29 мм (3.58 цалі х 1.97 цалі х 1.14 цалі) |
| Прыблізная вага ўпакоўкі | 0.198 кг (0.44 фунтаў) |
5. Прадукт скончыўсяview
The EBIKE Brushless Motor Controller is a key component for your electric bicycle, managing power delivery to the motor and integrating with your display system. Its robust design ensures reliable performance.
Малюнак 1: Спераду view of the EBIKE Brushless Motor Controller with specifications label.
Figure 2: Approximate dimensions of the controller casing (91mm x 50mm x 29mm).
6. Ўстаноўка і налада
Careful installation is crucial for the proper functioning of your e-bike. Refer to the wiring diagram below and follow these steps. If you are unsure, consult a qualified technician.
Figure 3: Detailed wiring diagram for the EBIKE Brushless Motor Controller.
Падключэнне правадоў:
- крыніца харчавання: Connect to your e-bike's 48V battery power supply. Ensure correct polarity.
- Дапамога: Connect to the pedal assist sensor (PAS) for assisted riding.
- Дросель: Connect to the e-bike's throttle unit for manual speed control.
- Motor Hall: Connect to the Hall sensor wires of your brushless motor.
- Tachometer Signal: Connect for speed feedback, if your system requires it.
- Check (6 & 7): These are typically self-learning or diagnostic wires. Follow specific instructions from your e-bike manufacturer or leave disconnected if not used.
- Дысплей (8): Connect to your KDS display meter.
- Brake Light/Rear Light (9): Connect to your e-bike's brake light or rear light.
- Headlights (10): Connect to your e-bike's headlight.
- Motor Cable (11, 12, 13): Connect these three phase wires to your brushless motor. Ensure they are connected correctly to match the motor's phase wires.
Important: Double-check all connections before applying power. Incorrect wiring can damage the controller, motor, or battery.
7. Інструкцыя па эксплуатацыі
Once the controller is correctly installed and connected:
- Уключэнне: Turn on your e-bike's main power switch. The KDS display meter should illuminate.
- Кіраванне дросельнай засланкай: Gently twist the throttle to engage the motor and control your speed.
- Дапаможнік педалі: Begin pedaling, and the pedal assist system will engage, providing motor assistance based on your selected assist level (if applicable via your KDS display).
- тармажэнне: When the brakes are applied, the controller should cut power to the motor, ensuring safe stopping.
- Агні: Operate your headlights and taillights as per your e-bike's standard controls.
8. Тэхнічнае абслугоўванне
- Regularly inspect all wiring connections for signs of wear, corrosion, or looseness.
- Keep the controller clean and free from dust, dirt, and moisture. Use a dry cloth for cleaning.
- Ensure the controller is mounted in a location that allows for adequate ventilation to prevent overheating.
- Avoid exposing the controller to extreme temperatures or harsh chemicals.
9. Выпраўленне непаладак
Калі ў вас узніклі праблемы з кантролерам, звярніцеся да наступных распаўсюджаных праблем і іх рашэнняў:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Рухавік не рэагуе / Няма харчавання | Loose power connection, low battery, faulty display, or damaged controller. | Check battery charge. Verify all power and display connections are secure. Inspect wiring for damage. |
| Матор працуе з перапынкамі | Loose motor phase wires or Hall sensor connections. | Ensure all motor and Hall sensor connections are tight and undamaged. |
| Дысплей не працуе | Loose display connection, faulty display, or controller issue. | Check the connection to the KDS display. If possible, test with a known working display. |
| Controller gets excessively hot | Перагрузка, дрэнная вентыляцыя або ўнутраная няспраўнасць. | Reduce load on the motor. Ensure controller has adequate airflow. If problem persists, discontinue use and seek professional help. |
If troubleshooting steps do not resolve the issue, please contact your seller or a qualified e-bike technician for assistance.
10. Карыстальніцкія парады
- Кабельнае кіраванне: Use zip ties or cable wraps to neatly secure all wires, preventing them from snagging or getting damaged during rides.
- Ахова вады: While the controller casing offers some protection, consider adding an extra layer of waterproofing or mounting it in a sheltered area if you frequently ride in wet conditions.
- Рэгулярныя праверкі: Periodically check the mounting screws of the controller to ensure it remains firmly attached to your e-bike frame.
- Сумяшчальнасць: Always confirm the voltage and current ratings of any new e-bike components (motor, battery, display) are compatible with your controller to avoid damage.
11. Гарантыя і падтрымка
For warranty information and technical support, please refer to the terms and conditions provided by your retailer or contact the seller directly. Keep your purchase receipt as proof of purchase.
