Уводзіны
The XTUGA SF-1 is a professional UHF wireless audio transmitter and receiver system designed to convert wired microphones into wireless units. It supports both dynamic and condenser microphones with adjustable voltage modes (0V, 5V, 48V phantom power). Featuring 16 selectable frequencies, low latency, and a long working distance, the SF-1 is ideal for stage performances, recording, and various audio applications.
Змест пакета
Калі ласка, пастаўце галачку для наступных пунктаў:
- 1 x XTUGA SF-1 Transmitter
- 1 x XTUGA SF-1 Receiver
- 1 x XLR Female to 6.35mm Male Plug Converter
- 1 x 6.35mm Female to XLR Male Plug Converter
- 2 х USB-кабеляў для зарадкі
- 1 х Кіраўніцтва карыстальніка
Прадукт скончаныview
Familiarize yourself with the components and controls of the XTUGA SF-1 system:
- Transmitter XLR Adapter: Connects to your microphone.
- Дысплей: Shows frequency, volume, and battery status.
- Кнопка CH (канал): Short press to adjust frequency.
- Power Charging Port (Transmitter): Порт USB-C для зарадкі.
- VOL (Volume) Button: Short press to adjust volume (5 levels). Long press to switch power supply mode (0V, 5V, 48V).
- Power Button (Transmitter): Доўгі націск, каб уключыць/выключыць.
- Receiver XLR Adapter: Connects to your mixing console or audio device.
- CHR (Charging) Light: Indicates charging status (red when charging).
- Power Charging Port (Receiver): Порт USB-C для зарадкі.
- RF (Radio Frequency) Light: Паказвае стан радыёчастотнага сігналу.
- AF (Audio Frequency) Light: Blinks with received audio signal.
- Power Button (Receiver): Доўгі націск, каб уключыць/выключыць.
- Electric Display Light: Індыкатар ўзроўню зарада батарэі.
Тэхнічныя характарыстыкі
Technical parameters of the XTUGA SF-1 Wireless Converter:
| Асаблівасць | Спецыфікацыя |
|---|---|
| Дыяпазон частот | 572-596 МГц |
| Рэгуляваныя каналы | 16 частотных кропак |
| Інтэрвал каналаў | 1.6 МГц |
| Метад мадуляцыі | DQPSK |
| Стабільнасць частоты | ±3 праміле |
| АЧХ | 40 Гц - 20 кГц |
| Працягласць выкарыстання | Да 6 гадзін |
| Адлегласць перадачы | 50-80 метраў (прамая бачнасць) |
| Убудаваны акумулятар | так |
| Сувязь | Бесправадная сувязь |
| Тып набору | Transmitter Sets |
| Пераўтваральнік | Дынамічны мікрафон |
| Выкарыстоўвайце | Stage Performance Wireless Microphone |
| стыль | Ручны мікрафон |
| Палярныя ўзоры | кардиоида |
| Дыяфрагма | S-Mall |
| Канвэртар мікрафона | Канвэртар праваднога ў бесправадное |
Кіраўніцтва па ўстаноўцы
Follow these steps to set up your XTUGA SF-1 wireless system:
- Зарадзіць адзінкі: Connect both the transmitter and receiver to a USB power source using the provided charging cables. The CHR light on the receiver will turn red while charging. Once fully charged, the light will turn off or change color (refer to the display for battery level).
- Connect Transmitter to Microphone: Plug the XTUGA SF-1 Transmitter directly into the XLR output of your wired microphone.
- Connect Receiver to Audio Input: Plug the XTUGA SF-1 Receiver into an available XLR input on your mixing console, recorder, speaker, or other audio equipment.
- Using Converters (Optional): If your audio equipment uses 6.35mm (1/4 inch) inputs instead of XLR, use the provided XLR to 6.35mm converter to connect the receiver. Similarly, if your microphone has a 6.35mm output, use the 6.35mm to XLR converter to connect it to the transmitter.
Інструкцыя па эксплуатацыі
- Уключэнне/выключэнне харчавання: Long press the 'POWER' button on both the transmitter and receiver to turn them on or off.
- Адпаведнасць частоты: The units should automatically pair. After successful RF light matching, the RF light on the receiver will turn red. The AF light on the receiver will blink when it receives a sound signal from the transmitter.
- Частата пераключэння: On the transmitter, short press the 'CH' (Channel) button to cycle through the 16 available frequencies. This helps avoid interference.
- Рэгуляванне гучнасці: On the transmitter, short press the 'VOL' (Volume) button to adjust the output volume in 5 levels.
- Switching Power Supply Mode (for Microphones):
The SF-1 offers three voltage adjustment modes to accommodate different microphone types. Press and hold the 'VOL' button on the transmitter for 5 seconds to switch between modes:- 0V (Dynamic Mic Mode): For standard dynamic microphones.
- 5V (Audio Mode): For condenser microphones or recording microphones that require 5V power.
- 48V (Condenser Mic Mode): For phantom-powered condenser microphones.
Note: Please confirm your microphone type before use and select the corresponding mode to prevent damage to your microphone or the device.
Three power supply modes for dynamic, 5V condenser, and 48V phantom-powered condenser microphones.
Парады карыстальніка
- Дыяпазон частот: The operating frequency range is 572 to 596 MHz. If you experience interference, try switching to a different channel using the 'CH' button.
- Некалькі адзінак: The system supports up to 16 adjustable frequency points, allowing multiple groups to be used simultaneously without interfering with each other. Ensure each pair (transmitter/receiver) is set to a unique channel.
- Тэрмін службы батарэі: The built-in battery provides approximately 6 hours of usage. Keep the units charged for uninterrupted performance.
- Сумяшчальнасць з мікрафонам: Always verify your microphone's power requirements (dynamic, 5V condenser, or 48V phantom) and select the correct power supply mode on the transmitter to ensure proper operation and prevent damage.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма выхаду гуку | Units not powered on, low battery, incorrect connections, frequency mismatch, incorrect microphone mode. | Ensure both units are powered on and charged. Check all cable connections. Verify transmitter and receiver are on the same frequency. Confirm correct power supply mode for your microphone. |
| Перашкоды або статычны шум | Other wireless devices, obstacles, or being too far from the receiver. | Change the frequency channel on the transmitter. Ensure a clear line of sight between transmitter and receiver. Reduce distance between units. Turn off other interfering wireless devices. |
| Кароткая далёкасць перадачы | Obstacles blocking signal, excessive distance. | Ensure a clear line of sight. Avoid placing units behind large metal objects or walls. Reduce the distance between the transmitter and receiver. |
| AF light not blinking with sound | No audio input to transmitter, transmitter not paired, microphone issue. | Check microphone connection and functionality. Ensure transmitter is powered on and paired with the receiver. |
| Акумулятар хутка разраджаецца | Aging battery, continuous high power usage. | Ensure units are fully charged before use. If battery life significantly degrades, contact support. (Note: Batteries are built-in and not user-replaceable.) |
Тэхнічнае абслугоўванне
- Уборка: Use a soft, dry cloth to clean the surface of the transmitter and receiver. Do not use liquid cleaners or solvents.
- захоўванне: Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
- Сыход за батарэяй: For optimal battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in use for extended periods.
- Апрацоўка: Handle the units with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
Гарантыя і падтрымка
XTUGA products are manufactured to high quality standards. For any technical issues, warranty claims, or support inquiries, please contact the seller or XTUGA customer service. Keep your purchase receipt as proof of purchase.
