1. Прадукт скончыўсяview
The TwoTrees TTS-20 MAX is a high-performance CNC laser engraving and cutting machine designed for a wide range of materials. Featuring a powerful 20W compressed spot laser with COS technology, it offers superior precision and efficiency. The machine supports APP, WiFi, TF card, and USB control for flexible operation. Its large 600x600mm working area allows for extensive creative projects. Key features include a new eye protection design, a lighter laser head for faster engraving speeds, and a limit switch for safe and correct operation.
Figure 1: TwoTrees TTS-20 MAX Laser Engraving Machine
2. Тэхніка бяспекі
- Always wear laser protective eyewear when operating the machine. The laser protective cover filters UV light by 97%, but direct exposure to the laser beam can cause serious eye damage.
- Трымайце дзяцей і хатніх жывёл далей ад працоўнай зоны.
- Ensure proper ventilation in the workspace to dissipate fumes and smoke generated during engraving and cutting.
- Не пакідайце машыну без нагляду падчас працы.
- Avoid engraving or cutting highly reflective, transparent, or flammable materials without proper precautions.
- Пераканайцеся, што машына размешчана на ўстойлівай роўнай паверхні.
- Адключыце электраэнергію перад выкананнем любога тэхнічнага абслугоўвання або рэгулявання.
3. Кіраўніцтва па наладцы
3.1 Распакоўка і зборка
The TwoTrees TTS-20 MAX comes 90% pre-assembled, making setup quick and easy, especially for beginners. Carefully remove all components from the packaging.
Figure 2: Pre-assembled design for quick setup.
3.2 Падключэнне харчавання і перадачы дадзеных
- Connect the power adapter to the machine and then to a suitable power outlet (24V 4A DC).
- For PC control, connect the machine to your computer via a USB cable.
- For WiFi or APP control, ensure your device is connected to the same network as the engraver.
- Insert a TF card into the designated slot for offline engraving, if desired.
3.3 Усталёўка праграмнага забеспячэння
The TTS-20 MAX supports popular engraving software:
- LASERGRBL: Сумяшчальнасць з аперацыйнымі сістэмамі Windows.
- LightBurn: A common paid software compatible with Windows, Mac, and Linux.
- For APP and Webpage control, refer to the specific instructions provided with the machine for downloading and setting up the mobile application or accessing the web інтэрфейс.
Figure 3: Connectivity options and supported software.
4. Інструкцыя па эксплуатацыі
4.1 Падрыхтоўка матэрыялаў
The TTS-20 MAX can engrave and cut a wide range of materials, including wood, plastic, paper, leather, sponge paper, alumina, acrylic, and stainless steel. Ensure your material is flat and securely placed within the 600x600mm working area.
Малюнак 4: Выпamples of engravable materials.
4.2 Факусоўка лазера
Adjust the laser module height manually using the lifting module adjustment mechanism to achieve optimal focus for your material. The laser spot size is 0.08*0.08mm for ultra-fine engraving.
Figure 5: Motion stability features, including height adjustment.
4.3 Працэс гравіроўкі і рэзкі
- Загрузіце свой дызайн file (NC, BMP, JPG, PNG, GCODE, etc.) into the chosen software (LASERGRBL or LightBurn).
- Set the engraving/cutting parameters (speed, power, passes) according to your material and desired effect. The machine boasts a maximum engraving speed of 30000mm/min (500mm/s).
- Initiate the engraving/cutting process. The machine's Y-axis dual motor design and lighter laser head contribute to its high speed and efficiency.
- Monitor the process closely, ensuring safety precautions are followed.
Video 1: Demonstration of cutting various materials (wood, acrylic) with the TTS-20 MAX.
4.4 Гравіроўка ў аўтаномным рэжыме
The TTS-20 MAX supports offline engraving via TF card. Prepare your GCODE file using compatible software, save it to a TF card, and insert it into the machine. You can then control the engraving process directly from the machine or via the mobile APP without a continuous PC connection.
5. Тэхнічнае абслугоўванне
- Ачыстка лазернай лінзы: Regularly clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to maintain optimal laser performance.
- Праверка рэек і рамянёў: Periodically check the aluminum profile rails and synchronous belts for dust, debris, or wear. Clean the rails and ensure belts are properly tensioned.
- Абнаўленні прашыўкі: Праверце вытворцы website for any available firmware updates to ensure your machine operates with the latest features and improvements.
- Генеральная ўборка: Keep the entire machine free from dust and debris, especially around moving parts and electronic components.
6. Выпраўленне непаладак
- Лазер не спрацоўвае:
- Check power connections and ensure the machine is turned on.
- Verify software settings for laser power and enable status.
- Ensure the laser module is properly connected and seated.
- Дрэнная якасць гравіроўкі/рэзкі:
- Adjust laser focus.
- Review speed and power settings for the specific material.
- Ачысціце лазерную лінзу.
- Пераканайцеся, што матэрыял роўны і стабільны.
- Machine Not Moving Correctly:
- Check belt tension and ensure they are not slipping.
- Inspect rails for obstructions or damage.
- Verify software connection (USB/WiFi) and G-code commands.
- Ensure limit switches are not obstructed or faulty.
- Connectivity Issues (WiFi/APP):
- Ensure the machine and your control device are on the same network.
- Restart the machine and your control device.
- Праверце сілу сігналу сеткі.
7. Тэхнічныя характарыстыкі
Figure 6: TwoTrees TTS-20 MAX detailed specifications.
| Асаблівасць | Спецыфікацыя |
|---|---|
| нумар мадэлі | TTS-20 MAX |
| Фірмовае найменне | ДваДрэвы |
| Метад гравіроўкі | USB Connection / APP / Wireless Computer Web Terminal (WiFi, TF Card) |
| Колер | Black & Lake Blue |
| Carving Material | Wood, Plastic, Paper, Leather, Bamboo, Sponge Paper, Stainless Steel, Chevron, Acrylic, Metal, Alumina |
| Матэрыял машыны | Алюміній Profile + Injection Molded Parts |
| Software Recognition Format | NC, Dxf, Bmp, Jpg, Png, Gcode |
| Магутнасць лазера | 20W Compressed Spot (COS Technology) |
| Выходная магутнасць | 20 Вт |
| Магутнасць машыны | 130 Вт |
| Бесперапынны працоўны час | 6 гадзін |
| Spot Compression Technology | так |
| Форма плямы | Прастакутнік |
| Даўжыня хвалі лазера | 450nm ±5nm |
| Панэль кіравання | 32-Bit Main Control Board |
| мова | English, Italian, French, German, Portuguese, Czech, Spanish, Russian, Polish, Japanese, Korean (13 languages) |
| Памер плямы | 0.08*0.08 мм |
| Вага машыны | 3.6 кг |
| Height Adjustment Method | Lifting Module Adjustment (Manual) |
| Памер упакоўкі | 830x155x175 мм |
| Кіраванне рухам | так |
| Вага ўпакоўкі | 5.6 кг |
| Памер машыны | 787x770x124 мм |
| Электразабеспячэнне | 24V4A пастаяннага току |
| Памер гравюры | 600x600 мм |
| Аперацыйная сістэма | Windows, Mac |
| Xy Axis Positioning Accuracy | 0.01 мм |
| Праграмнае забеспячэнне падтрымкі | Laser GRBL (Open Source Free Software, Support Win Xp/Win 7/Win 8/Win 10 System), Lightburn (Paid Software, Supports Win Xp/Win 7/Win 8/Win 10 System, Mac System) |
| Дакладнасць гравіроўкі | ±0.1 мм |
| Працоўнае асяроддзе | Temperature 5-40°C, Humidity 20-60%RH |
| Максімальная хуткасць гравіроўкі | 30000mm/min (500mm/s) |
| Рэжым гравіроўкі | Image carving / Text carving / Scanning carving / Contour carving / Pixel carving |
| Гэта разумная прылада | так |
| Паходжанне | Кантынентальны Кітай |
| Атэстацыя | CE |
8. Карыстальніцкія парады
- Тэставанне матэрыялу: Always perform small test engravings on new materials or when adjusting settings to find the optimal speed and power.
- Паветраная дапамога: Utilize an air assist system (if available or included) to improve cutting performance and reduce charring on materials like wood.
- Honeycomb Panel: Using a honeycomb panel under your material can significantly improve cutting results by providing better airflow and reducing back-reflection.
- Software Familiarity: Take time to learn your chosen software (LightBurn or LASERGRBL) thoroughly. Many online tutorials and communities can help.
- Рэгулярная ўборка: A clean machine performs better and lasts longer. Pay attention to the laser lens and motion system.
9. Гарантыя і падтрымка
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records handy for any support requests.
