ATK V100 Pro Mechanical Keyboard User Manual

1. Уводзіны

The ATK V100 Pro is a high-performance mechanical keyboard designed for gamers and professionals seeking versatility and responsiveness. Featuring three-mode connectivity (2.4G wireless, Bluetooth 5.0, and wired USB-C), a durable CNC aluminum alloy upper cover, and hot-swappable mechanical switches, it offers a customizable and low-latency experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK V100 Pro keyboard.

2. Кіраўніцтва па наладцы

2.1 Змест пакета

Перад пачаткам пераканайцеся, што ўсе прадметы наяўныя:

• ATK V100 Pro Mechanical Keyboard
• Кабель USB-C да USB-A
• Бесправадны прыёмнік 2.4G
• Keycap Puller / Switch Puller (may be combined)
• Кіраўніцтва карыстальніка (гэты дакумент)

2.2 Зарадка клавіятуры

The ATK V100 Pro is equipped with an 8000mAh battery for extended wireless use. To charge, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard's indicator light will show charging status.

2.3 Падключэнне клавіятуры

The ATK V100 Pro supports three connection modes:

2.3.1 Правадны рэжым

1. Падключыце канец кабеля USB-C да клавіятуры, а канец USB-A — да кампутара.
2. Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
3. Клавіятура будзе распазнана аўтаматычна вашай аперацыйнай сістэмай.

2.3.2 Бесправадны рэжым 2.4G

1. Устаўце USB-прыёмнік 2.4G у даступны USB-порт на вашым кампутары.
2. Set the mode switch on the keyboard to '2.4G' (usually indicated by a wireless icon).
3. The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (refer to keyboard layout for specific key) to initiate pairing.

2.3.3 Рэжым Bluetooth

1. Set the mode switch on the keyboard to 'Bluetooth' (usually indicated by a Bluetooth icon or 'BT').
2. На вашым камп'ютары або прыладзе перайдзіце ў налады Bluetooth і знайдзіце новыя прылады.
3. The keyboard should appear as 'ATK V100 Pro' or similar. Select it to pair.
4. You may need to press and hold Fn + a specific Bluetooth key (e.g., Fn+1, Fn+2, Fn+3) to enter pairing mode or switch between paired Bluetooth devices.

2.4 Software Installation (ATK HUB)

For advanced customization of lighting effects, key remapping, and macros, download and install the ATK HUB software from the official ATK website (refer to the 'Warranty & Support' section for the website address). This software allows one-stop management of multiple devices.

3. Інструкцыя па эксплуатацыі

3.1 Асноўныя функцыі клавіш

The ATK V100 Pro features a 101-key layout. All standard alphanumeric and function keys operate as expected. The keyboard also boasts 1ms ultra-low latency for a responsive experience, especially in gaming.

3.2 Мультымедыйныя і функцыянальныя клавішы

Use the 'Fn' key in combination with other keys (typically F1-F12 or dedicated multimedia keys) to access multimedia controls (play/pause, volume up/down, mute) and other system functions. Refer to the keycap legends for specific combinations.

3.3 Backlight Control (ARGB)

The keyboard features customizable ARGB lighting with 16 million colors and various effects. You can adjust brightness, change lighting modes, and select colors directly from the keyboard using Fn key combinations, or through the ATK HUB software for more precise control.

3.4 Перамыкачы з магчымасцю гарачай замены

The ATK V100 Pro supports full key hot-swapping, allowing you to change mechanical switches without soldering. This enables personalized DIY experiences and easy replacement of faulty switches.

3.5 Эрганамічны дызайн

The keyboard is designed with two-stage foot support, allowing you to adjust the typing angle for improved comfort and reduced fatigue during long sessions.

4. Тэхнічнае абслугоўванне

4.1 Ачыстка

• Генеральная ўборка: Use a soft, dry cloth to wipe the keyboard surface. For stubborn dirt, a slightly damp можна выкарыстоўваць тканіну з мяккім мылам, сачыце за тым, каб вадкасць не патрапіла на клавіятуру.
• Ачыстка клавіш: Use the provided keycap puller to remove keycaps. Clean them with a mild detergent and water, then dry thoroughly before reattaching.
• Выдаленне пылу: Use compressed air to blow out dust and debris from between the keycaps and switches.

4.2 Замена перамыкача

Thanks to the hot-swappable design, individual switches can be replaced easily:

1. Выключыце клавіятуру або адлучыце яе ад прылады.
2. Use the switch puller tool to carefully grip and pull out the desired switch.
3. Align the pins of the new switch with the holes on the PCB and gently push it in until it clicks into place. Ensure the pins are not bent.
4. Заменіце каўпачок клавішы.

4.3 Сыход за акумулятарам

• Avoid exposing the keyboard to extreme temperatures (hot or cold).
• Do not allow the battery to fully discharge frequently, as this can reduce its lifespan.
• If storing the keyboard for an extended period, charge it to about 50-70% before storage.

5. Выпраўленне непаладак

5.1 Клавіятура не падключаецца/не рэагуе

• Правадной рэжым: Пераканайцеся, што кабель USB-C надзейна падключаны як да клавіятуры, так і да кампутара. Паспрабуйце іншы порт USB або кабель.
• Бесправадны рэжым 2.4G: Ensure the 2.4G receiver is properly inserted and the keyboard is switched to 2.4G mode. Check battery level. Try re-pairing (Fn + 2.4G key).
• Рэжым Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Check battery level. Try re-pairing or switching to a different Bluetooth profile (Fn+1/2/3).
• Усе рэжымы: Ensure the keyboard is charged. Restart your computer.

5.2 Keys Not Responding or Double-Typing

• Remove the keycap and check for any debris or obstruction around the switch.
• If the issue persists, the switch might be faulty. Utilize the hot-swappable feature to replace the problematic switch.

5.3 Праблемы з падсветкай

• Ensure the backlight is turned on and brightness is adjusted using Fn key combinations.
• Check the ATK HUB software for any conflicting settings or to reset lighting profiles.

5.4 Lag or High Latency

• In 2.4G or Bluetooth mode, ensure there are no strong interfering signals (e.g., other wireless devices, microwaves) nearby.
• For critical gaming, consider using the wired connection for the most stable and lowest latency performance.
• Пераканайцеся, што батарэя клавіятуры дастаткова зараджана.

6. Тэхнічныя характарыстыкі

6.1 Key Switch Specifications

7. Карыстальніцкія парады

• Паэксперыментуйце з перамыкачамі: Вазьміце авансtage of the hot-swappable design to try different switch types that best suit your typing or gaming preferences.
• Customize RGB Profiles: Use the ATK HUB software to create and save multiple RGB lighting profileдля розных праграм або гульняў.
• Абнаўляйце прашыўку: Regularly check the official ATK webсайт для абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і доступ да новых функцый.
• Аптымізацыя прадукцыйнасці бесправадной сувязі: For the best wireless experience, keep the 2.4G receiver close to the keyboard and avoid placing large metal objects between them.

8. Гарантыя і падтрымка

For product support, technical assistance, or warranty inquiries, please contact your seller or visit the official ATK website. For services such as product driver download, please visit https://ATK.PRO.