Інструкцыя па эксплуатацыі разумнага pH-метра глебы YAGO YY-1033

1. Уводзіны

The YAGO Smart Soil PH Meter YY-1033 is a professional digital soil tester designed for accurate measurement of soil pH and temperature. Featuring Bluetooth connectivity and APP control, it allows for real-time data synchronization, logging, and analysis. This device is suitable for various applications including gardening, lawn care, agriculture, farming, and hydroponics, for both indoor and outdoor use.

Figure 1: YAGO Smart Soil PH Meter YY-1033 with app display.

2. Тэхнічныя характарыстыкі

Figure 2: Components and dimensions of the YY-1033 Soil PH Meter.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе прадметы наяўныя і ў добрым стане:

• 1 x YAGO Smart Soil PH Meter (YY-1033)
• pH Buffer Powders (for calibration, if required)
• Кіраўніцтва карыстальніка (гэты дакумент)

Малюнак 3: Тыповы змест упакоўкі.

4. Настройка

4.1 Устаноўка батарэі

1. Unscrew the battery compartment cap at the top of the meter (refer to Figure 2).
2. Insert 4 x 1.5V LR44 button cell batteries, ensuring correct polarity.
3. Securely replace the battery compartment cap.

Note: Batteries are not included in the package due to shipping regulations.

4.2 Падрыхтоўка электродаў

1. Remove the black electrode protection sleeve from the bottom of the meter.
2. Install the metal probe protective sleeve onto the electrode before testing to prevent damage.

Figure 4: Electrode and protective sleeve.

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне сілкавання

• Press the 'ON/OFF' button to turn the meter on.
• Press and hold the 'ON/OFF' button to turn the meter off.

5.2 Вымярэнне

1. Ensure the metal protective sleeve is installed.
2. Insert the probe into the soil to a depth of 5-10cm (2-4 inches).
3. Wait for the pH and temperature values on the LCD display to stabilize before reading.

Figure 5: How to use the soil pH meter.

5.3 Temperature Unit Conversion

• Press the 'HOLD/TEMP' button to switch between Celsius (℃) and Fahrenheit (℉) temperature units.

5.4 Data Holding

• Press and hold the 'HOLD/TEMP' button to freeze the current reading on the display. Press again to release.

5.5 Bluetooth and APP Control

1. Пераканайцеся, што Bluetooth уключаны на вашым смартфоне.
2. Download the dedicated mobile application (available for Android and iOS).
3. Open the app and follow the on-screen instructions to connect to the YY-1033 meter via Bluetooth.
4. The app will display real-time pH and temperature data.
5. Utilize app features for data storage, sharing, and printing. The app also controls the backlight of the meter's display.

Figure 6: Data synchronization with the mobile application.

Figure 7: Real-time data viewing and logging via the app.

6. Каліброўка

The YY-1033 Soil PH Meter is generally pre-calibrated for immediate use. According to manufacturer information, there is typically no need for manual pH adjustment for standard operation, and calibration powder is not supplied as a standard accessory.

However, for advanced users or if recalibration becomes necessary over time, the device supports calibration at specific pH points (6.86/4.00/9.18 or 7.00/4.00/10.01). If manual calibration is required, you would need to acquire appropriate pH buffer solutions separately. Refer to the 'CAL' button on the device (Figure 2) and the mobile application for calibration procedures if external solutions are used.

7. Тэхнічнае абслугоўванне

7.1 Ачыстка электрода

• After each measurement, wipe the electrode clean with a soft cloth or tissue.
• Ensure the electrode is free from soil particles and debris.

7.2 Захоўванне

• Always replace the black electrode protection sleeve after use. This sleeve typically contains electrode protection liquid to keep the probe moist.
• Захоўвайце тэстар у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Выміце батарэі, калі прылада не будзе выкарыстоўвацца на працягу доўгага часу.

8. Выпраўленне непаладак

• Прылада не ўключаецца: Праверце, ці правільна ўсталяваныя батарэйкі і ці дастаткова яны зараджаныя. Пры неабходнасці замяніце батарэйкі.
• Няправільныя паказанні: Ensure the electrode is clean. If readings remain inconsistent, consider performing a manual calibration with appropriate buffer solutions (if available).
• No data synchronization with APP: Verify that Bluetooth is enabled on both the meter and your smartphone. Ensure the app is installed correctly and has necessary permissions. Try restarting both the meter and the app.
• Damaged or non-functional product upon receipt: If the product is damaged, inconsistent with the order, or not working upon arrival, take clear pictures of the product and the package sticker. Contact customer service for assistance.

9. Карыстальніцкія парады

• For best results, ensure the soil is moist but not waterlogged when taking measurements.
• Insert the probe gently to avoid damaging the electrode.
• Regularly check the battery level, especially before important measurements, to ensure consistent performance.
• The mobile app offers long-term data recording, which is useful for tracking soil conditions over time and analyzing trends.

10. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please refer to the seller's contact information provided at the time of purchase or visit the official RCYAGO webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.