1. Уводзіны
Thank you for choosing the Eyoyo EY-022 2D Bluetooth Barcode Scanner. This manual provides detailed instructions for the correct use, setup, and maintenance of your device. Please read it carefully before operation and keep it for future reference.
Меры засцярогі
- Read the instruction carefully before use.
- Do not arbitrarily scan setting codes, as some settings may become temporarily unavailable.
- For any issues, contact support@eyoyousa.com.
2. Асаблівасці прадукту
- Super lightweight, mini size compact design, portable.
- Retractable Phone Back Clip Design: Adjustable clip for mobile phones with a width of 60mm (2.36 inch) - 110mm (4.33 inch).
- Wired and Wireless Dual-Mode: Bluetooth wireless & USB wired connection.
- Compatibility: Supports Windows XP/7/8/10 PCs with Bluetooth, Android, and iOS devices.
- Low Power Consumption: 1000mAh rechargeable battery provides up to 8 hours continuous scanning, 4 hours charging time, 720 hours standby.
- 16MB Storage: Stores over 100,000 UPC/EAN barcodes in off-line scanning mode.
- Sound Control: The scanner's sound can be turned off.
- Bluetooth Protocols: Supports HID, SPP, and BLE protocols.
- Customization: Supports adding/hiding custom prefix/suffix digits.
- Сімвалогіі штрых-кодаў:
- 1D: Codabar, Code39, Code32, Interleaved 2 of 5 (ITF25), Industrial 2 of 5, Matrix 2 of 5, Code93, Code11, Code128, GS1-128, UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13, ISBN, ISSN, GS1 databar, GS1 databar limited, GS1 databar expanded, ISBT.
- 2D: PDF417, Micro PDF417, QR Code, Data Matrix, Aztec.

3. Тэхнічныя характарыстыкі
| Параметр | Каштоўнасць |
|---|---|
| Пратакол Bluetooth | Bluetooth BLE, SPP, HID |
| Правадной USB | Support OTG, USB port |
| Ёмістасць батарэі | 1000 мАг |
| Захоўванне | 16 Мб |
| Модуль Bluetooth | Модуль Bluetooth 4.1 |
| Індыкатар | LED light, Buzzer |
| Падтрымліваюцца 1D штрых-коды | Codabar, Code39, Code32, Interleaved 2 of 5 (ITF25), Industrial 2 of 5, Matrix 2 of 5, Code93, Code11, Code128, GS1-128, UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13, ISBN, ISSN, GS1 databar, GS1 databar limited, GS1 databar expanded, ISBT |
| Падтрымліваюцца 2D штрых-коды | PDF417, Micro PDF417, QR Code, Data Matrix, Aztec |
| Зарадка Voltagе/Ток | 5 В/1 А |
| Кантраст друку | >25% |
| Працоўная тэмпература | -10°C ~ 50°C |
| Тэмпература захоўвання | -40°C ~ 80°C |
| Грубасць | Resists about 6 drops from 1.5m to concrete ground |
| Stretching Range | 63 мм - 120 мм |

4. Настройка
4.1 Змест пакета
- 1x 2D-сканер штрых-кодаў Eyoyo EY-022
- 1x кабель для зарадкі
- 1x Кіраўніцтва карыстальніка

4.2 Attaching to a Mobile Phone
The scanner features a retractable back clip design for easy installation on mobile phones. It supports phones with a width between 60mm (2.36 inches) and 110mm (4.33 inches).
- Position the scanner near the phone.
- Stretch the scanner's clip to secure the phone.
- Ensure the phone is firmly held by the clip.
Заўвага:
- Не ўсталёўвайце сканер там, дзе на вашым тэлефоне ёсць кнопка.
- Avoid installing the scanner where there are protruding decorations on your phone.

4.3 Спалучэнне па Bluetooth
The scanner can be paired with Android, iOS mobile phones, or PCs with Bluetooth capabilities.
Крокі спалучэння Bluetooth:
- Start the scanner. It will automatically enter Bluetooth search mode, and the blue light on the left will flash quickly.
- On your device (phone, tablet, or PC), turn on Bluetooth and search for devices.
- Select the device named "EY-022P" from the list.
- Upon successful pairing, you will hear a beep, and the blue light on the left of the scanner will remain steadily on.
Важна:
- If your Bluetooth device was previously connected to other barcode scanners, delete all old Bluetooth connection records from your device before connecting. For iPhone users, go to Settings > Bluetooth > MY DEVICES, click the "i" icon next to the old device, and select "Forget this Device".
Communication Mode Switching:
The default communication mode is Bluetooth HID. You can switch between Bluetooth HID, SPP, and BLE modes by scanning the corresponding QR codes in the user manual (refer to page 16 of the PDF manual for specific QR codes).
5. Інструкцыя па эксплуатацыі
5.1 Рэжымы сканавання
Сканер прапануе тры рэжымы сканавання:
- Ручны рэжым запуску (па змаўчанні): Press the trigger button to scan a barcode. The scanner stops reading after a successful scan or when the trigger is released.
- Рэжым бесперапыннага сканавання: The scanner continuously scans barcodes without needing to press the trigger.
- Рэжым сканавання з аўтаматычным распазнаваннем: The scanner automatically reads a barcode once it detects one in its scanning field, without requiring a button press.
To switch between these modes, scan the appropriate configuration barcode found in the user manual (refer to page 28 of the PDF manual for specific QR codes).

5.2 Upload Mode Setting
The scanner supports different upload modes:
- Звычайны рэжым: Scans are uploaded directly to the connected device (phone or PC) via USB or Bluetooth. If transmission fails, data may be lost.
- Рэжым захоўвання: Scans are stored internally in the scanner's 16MB memory. This mode is useful when out of Bluetooth range. The scanner beeps once for each successful scan. If memory is full, it emits three low-frequency beeps.
To switch to Storage Mode, scan the "Storage Mode" barcode (refer to page 18 of the PDF manual). To upload stored data, scan the "Data Upload" barcode (refer to page 19 of the PDF manual). Data is not automatically deleted after upload, allowing multiple uploads. To clear stored data, scan the "Clear Data" barcode (refer to page 20 of the PDF manual).
5.3 Transmission Speed Setup
Adjust the transmission speed based on your PC or phone's receiving speed. If barcodes lose characters, especially on Android phones, slow down the transmission speed. Scan the "Fast", "Medium", "Low", or "Very Low" barcodes to adjust (refer to page 17-18 of the PDF manual).
5.4 Keyboard Language Setting
Configure the scanner's keyboard language to match your device's settings for correct symbol output. Scan the appropriate language barcode for Windows, Android, or iOS systems (refer to pages 22-23 of the PDF manual).
5.5 Character Conversion
The scanner can convert English letters in barcode output to upper case, lower case, or interchange case. The default is Normal output (no change). Scan the relevant barcode to set (refer to page 27 of the PDF manual).
5.6 Прэфікс і суфікс
You can add up to 32 bytes of prefix and suffix to the scanned barcode data. Refer to page 46 of the PDF manual for detailed instructions and corresponding barcodes in Appendix A (pages 47-54).
6. Акумулятар і зарадка
The scanner is powered by a 1000mAh rechargeable battery.
Індыкацыя разраду батарэі:
If the scanner beeps continuously, the battery level is below 5%. Stop scanning and charge the device immediately.
Працэдура зарадкі:
- Insert one end of the USB cable into the bottom of the scanner.
- Insert the other end into a 5V DC USB interface power adapter.
Індыкатар зарадкі:
The red indicator light on the scanner will be on during charging and will turn off when fully charged.
NOTE: Use only a special 5V DC power adapter for charging. Using an incorrect power adapter can cause permanent damage to the scanner and battery.
Зарад батарэі:
To check the remaining battery level, place the cursor in a text field on your connected device and scan the "Electric quantity display" barcode (refer to page 13 of the PDF manual).

7. Ліквідацыю непаладак і FAQ
Агульныя праблемы і рашэнні:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Scanner has no reaction, scanning light does not show up. | Батарэя разрадзілася. | Charge the scanner for at least 2-5 hours. |
| Scanner head is out of condition. | Contact support@eyoyousa.com for assistance. | |
| Scanner cannot hold a charge. | PC's USB port is out of condition. | Падключыце сканер да іншага порта USB для зарадкі. |
| USB cable is out of condition. | Contact support@eyoyousa.com for assistance. |
Часта задаюць пытанні:
- Cannot pair scanner with Bluetooth devices?
- Ensure the scanner is in the correct Bluetooth protocol matching state.
- Delete all previous Bluetooth connection records from your device before connecting.
- If issues persist, the wireless module might be damaged; contact support@eyoyousa.com.
- Scanned barcodes fail to upload to a computer or smartphone?
- Verify successful pairing (blue LED indicator should be steady).
- Check if the scanner is in "Storage Mode". If so, scan the "Data Upload" barcode (refer to page 19 of the PDF manual).
- Switch to "Normal Mode" for simultaneous scanning and uploading.
- If issues persist, the wireless module might be damaged; contact support@eyoyousa.com.
- Does scanning a product barcode automatically include the product name?
- No, the scanner acts like a keyboard, outputting the alphanumeric characters of the barcode. Interpretation of these characters (e.g., linking to product names) depends on your database software or inventory system.
- Scanner does not read barcodes exactly?
- Adjust the transmission speed to slow (refer to page 17 of the PDF manual).
- If the problem continues, contact support@eyoyousa.com with a photo of the barcode and a video of the operation.
- Some barcodes cannot be read?
- Incomplete or unclear barcodes may not be readable.
- Some barcode types might be disabled by default. Activate the specific barcode type by scanning the relevant setting code in the user manual (refer to pages 29-43 of the PDF manual).
- Contact Customer Service if you need assistance identifying the barcode type.
- How to remove auto-enter after every scanning?
- Scan the "None" code on page 26 of the PDF manual.
- How to add Tab after every scanning?
- Scan the "Add TAB" code on page 26 of the PDF manual.
8. Карыстальніцкія парады
- Аптымальнае прыляганне да тэлефона: When clipping the scanner to your phone, ensure it avoids any side buttons (like power or volume) to prevent accidental presses and ensure a secure fit.
- Паўторнае падключэнне Bluetooth: If you experience frequent disconnections, try "forgetting" the device in your phone's Bluetooth settings and re-pairing it. This often resolves connectivity glitches.
- Scanning Difficult Barcodes: For damaged, distorted, or reflective barcodes, try adjusting the scanning angle or distance. Sometimes, a slight tilt can help the scanner read more effectively.
- Кіраванне батарэяй: To maximize battery life, utilize the "Sleep Time Setting" feature to automatically power off the scanner after a period of inactivity (refer to page 25 of the PDF manual).
- Цэласнасць дадзеных: When uploading data from Storage Mode, ensure a stable wireless connection or use a USB cable to prevent data loss during transfer.
9. Гарантыя і падтрымка
All Eyoyo brand products come with a one-year warranty and lifelong technical support.
Звязацца са службай падтрымкі:
For any product-related issues, warranty claims, or technical assistance, please contact:
- электронная пошта: support@eyoyousa.com
- WhatsApp: +8618589059424
- Tel: 909-317-8588 (9:00 AM - 5:00 PM Monday - Friday)
- Афіцыйны Webсайт: www.eyoyousa.com
- Група ў Facebook: https://www.facebook.com/groups/90872207284967
When contacting support, it is recommended to provide the model number, date of purchase, purchase link, order number, and attach videos or photos demonstrating the problem for a quicker resolution.
You can also register for the Eyoyo VIP Club to ensure full warranty coverage by sending an email with your purchase details to support@eyoyousa.com.
PDF-версія кіраўніцтва карыстальніка даступная для запампоўкі: Eyoyo EY-022P User Manual (PDF)
