1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA H61 mini ITX Motherboard. This motherboard is designed for compact and versatile PC builds, supporting Intel LGA 1155 processors and featuring modern connectivity options like M.2 NVME and M.2 WIFI, along with Gigabit Ethernet. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.
2. Асаблівасці
The JINGSHA H61 mini ITX Motherboard offers a robust set of features for various computing needs:
- Падтрымка працэсара: LGA 1155 socket, compatible with Intel Core i3, i5, and i7 processors.
- Набор мікрасхем: Intel H61.
- Памяць: Single DIMM slot supporting DDR3/DDR3L memory up to 8GB at 1066/1333/1600MHz.
- захоўванне: Two SATA 2.0 ports, one M.2 NVME/NGFF slot for high-speed storage.
- Бесправаднае падключэнне: Dedicated M.2 WIFI port for wireless modules.
- Сетка: Integrated Gigabit Ethernet (RTL8111H) for stable and fast wired network connections.
- Вывад графікі: VGA and HDMI ports for display connectivity.
- Аўдыё: Onboard ALC662 audio codec with Line-out and Microphone jacks.
- Парты USB: Multiple USB 2.0 ports on the rear I/O and via internal headers.
- Формаў-фактар: Mini ITX (170mm x 170mm), ideal for small form factor cases.
- кандэнсатары: Utilizes all solid-state capacitors for enhanced stability and durability.
3. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Разетка працэсара | Intel LGA 1155 |
| Набор мікрасхем | Intel H61 |
| Памяць | 1x DIMM DDR3/DDR3L, 1066/1333/1600MHz, Max 8GB |
| Вывад графікі | VGA, HDMI |
| Сетка | 1x RTL8111H 1000Mbps Ethernet (Gigabit LAN) |
| Інтэрфейс захоўвання | 2x SATA 2.0, 1x M.2 NVME/NGFF, 1x M.2 WIFI |
| Аўдыё | Аўдыёкодэк ALC662 |
| Заднія парты ўводу-вываду | 1x DC12V IN, 1x HDMI, 1x VGA, 2x USB 2.0, 1x RJ45, 1x Line out, 1x Mic |
| Onboard I/O Headers | 1x 4-Pin ATX 12V Power, 1x CPU_FAN, 1x SYS_FAN, 2x USB 2.0 headers, 1x F_AUDIO, 1x F_PANEL, 1x SPK, 1x LPT, 1x PS/2, 1x COM, 1x HD_LED, 1x PWR_LED, 1x HDD_LED, 1x PWR_SW, 1x RESET_SW |
| Стандарты PCI-E | PCI-E 2.0 |
| BIOS | BIOS AMI EFI |
| Формаў-фактар | Mini ITX (170mm x 170mm) |
4. Кіраўніцтва па наладцы
Follow these steps to properly install your JINGSHA H61 mini ITX Motherboard and its components:
- Падрыхтуйце справу: Ensure your mini ITX case is ready for motherboard installation. Install standoffs if necessary.
- Усталюйце працэсар:
- Open the CPU socket retention lever on the LGA 1155 socket.
- Carefully align your Intel LGA 1155 processor with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket.
- Акуратна ўстаўце працэсар у раз'ём. Не прыкладвайце сілы.
- Зачыніце рычаг фіксацыі, каб зафіксаваць працэсар.
- Нанесці цеплавую пасту на працэсар і ўсталяваць кулер працэсара ў адпаведнасці з інструкцыямі вытворцы.
- Усталяваная памяць (RAM):
- Locate the single DIMM slot on the motherboard.
- Open the clips on both ends of the memory slot.
- Align the notch on the DDR3/DDR3L memory module with the notch in the slot.
- Шчыльна ўстаўце модуль памяці ў слот, пакуль зашчапкі не зафіксуюцца.
Figure 5: Location of the DIMM DDR3/DDR3L memory slot. - Усталюйце прылады захоўвання дадзеных:
- Дыскі SATA: Connect SATA data cables from your SSDs/HDDs to the SATA 2.0 ports on the motherboard. Connect SATA power cables from your power supply to the drives.
- M.2 NVME/NGFF SSD: Locate the M.2 NVME/NGFF slot. Insert the M.2 SSD at an angle and then push it down, securing it with the provided screw.
- Install M.2 WIFI Module:
- Locate the M.2 WIFI slot.
- Insert the M.2 WIFI module at an angle and push it down, securing it with a screw.
- Attach the antenna cables to the module if applicable.
Figure 6: Location of M.2 NVME/NGFF and M.2 WIFI slots. - Усталюйце матчыну плату: Акуратна ўстаўце матчыну плату ў корпус, сумясціўшы адтуліны для шруб з выступамі. Замацуйце матчыну плату шрубамі.
- Падключыце харчаванне:
- Connect the 4-pin ATX 12V power connector from your power supply to the corresponding port on the motherboard.
- If using a DC12V IN power supply, connect it to the DC12V IN port on the rear I/O.
- Падключэнне раздымоў пярэдняй панэлі:
Refer to Figure 7 for the exact location of these headers. Connect the cables from your case's front panel to the corresponding headers on the motherboard:
- F_PANEL: Power Switch (PWR SW), Reset Switch (RESET SW), Power LED (PWR LED), Hard Drive Activity LED (HDD LED).
- F_AUDIO: Front panel audio jacks.
- Загалоўкі USB: Front panel USB 2.0 ports.
- SPK: Speaker header.
- Connect I/O Ports:
- Дысплей: Connect your monitor to the VGA or HDMI port on the rear I/O.
- Сетка: Connect an Ethernet cable to the RJ45 port.
- USB прылады: Connect peripherals to the USB 2.0 ports.
- Аўдыё: Connect speakers/headphones to the Line out jack and a microphone to the Mic jack.
Figure 7: Detailed board layout showing CPU_FAN, SYS_FAN, LPT, COM, USB, SATA, M.2, and front panel headers. 
Figure 8: Close-up of the rear I/O ports including DC12V IN, HDMI, VGA, USB 2.0, Gigabit Ethernet, Line out, and Mic.
5. Інструкцыя па эксплуатацыі
- Уключэнне: After all components are securely installed and connected, press the power button on your PC case.
- Настройка BIOS:
- Upon initial boot, or if you need to configure system settings, press the 'DEL' key (or 'F2' depending on BIOS version) repeatedly during startup to enter the AMI EFI BIOS setup utility.
- In the BIOS, you can configure boot order, system time, enable/disable integrated peripherals, and monitor system status.
- Save changes before exiting the BIOS.
- Ўстаноўка аперацыйнай сістэмы:
- Insert your operating system installation media (USB drive or DVD) into the appropriate drive.
- Boot from the installation media (you may need to adjust boot order in BIOS).
- Follow the on-screen instructions to install your preferred operating system.
- Ўстаноўка драйвера: After installing the operating system, install all necessary drivers for the chipset, network, audio, and any other integrated components. These are typically provided on a driver CD or available for download from the manufacturer's webсайт.
6. Тэхнічнае абслугоўванне
Regular maintenance helps ensure the longevity and stable operation of your motherboard:
- Выдаленне пылу: Перыядычна чысціце матчыну плату і кампаненты ад пылу сціснутым паветрам. Перад чысткай пераканайцеся, што сістэма выключана і адключана ад сеткі.
- Праверце злучэнні: Occasionally check all power and data cables to ensure they are securely connected.
- Абнаўленні BIOS: Праверце вытворцы webсайт для абнаўленняў BIOS. Абнаўляйце BIOS толькі пры неабходнасці і ўважліва выконвайце інструкцыі, каб пазбегнуць нестабільнасці сістэмы.
- Абнаўленні драйвераў: Keep your drivers updated to ensure compatibility and optimal performance.
7. Выпраўленне непаладак
Калі ў вас узніклі праблемы, звярніцеся да наступных распаўсюджаных крокаў па ліквідацыі непаладак:
- Няма харчавання:
- Ensure the power supply is connected correctly to the motherboard (4-pin ATX 12V) and the wall outlet.
- Check the power button connection to the F_PANEL header.
- Verify the power supply unit (PSU) is functional.
- Няма дысплея:
- Ensure the monitor is connected to the correct VGA or HDMI port and is powered on.
- Reseat the memory module(s).
- Check if the CPU is properly seated and the CPU cooler is installed correctly.
- Калі магчыма, праверце з іншым маніторам або кабелем.
- Нестабільнасць/збоі сістэмы:
- Check for overheating. Ensure CPU cooler is functioning and case airflow is adequate.
- Запусціце інструменты дыягностыкі памяці, каб праверыць наяўнасць няспраўных аператыўных прылад.
- Пераканайцеся, што ўсе драйверы правільна ўсталяваныя і абноўленыя.
- Праверце аслабленыя злучэнні.
- Праблемы з сеткай:
- Ensure the Ethernet cable is securely connected to the RJ45 port and the router/modem.
- Праверце ўстаноўку сеткавага драйвера.
- If using M.2 WIFI, ensure the module is correctly installed and drivers are present.
- BIOS Not Accessible:
- Ensure you are pressing the correct key (DEL or F2) repeatedly immediately after powering on.
- Clear CMOS by removing the CMOS battery for a few minutes or using the clear CMOS jumper (if available, refer to motherboard diagram).
8. Карыстальніцкія парады
Based on general user experiences with similar mini ITX motherboards, consider the following tips:
- Кабельнае кіраванне: Due to the compact size of mini ITX cases, careful cable management is crucial for airflow and ease of access.
- Сумяшчальнасць драйвераў: Always download the latest drivers from the official JINGSHA website or the chipset manufacturer (Intel) for optimal performance and stability.
- крыніца харчавання: Ensure your power supply provides sufficient wattage for all components, especially if you plan to use a dedicated graphics card (though this board is primarily for integrated graphics).
- M.2 Installation: When installing M.2 devices, ensure they are fully seated and secured with the screw to prevent connectivity issues.
9. Гарантыя і падтрымка
For warranty information, technical support, or service inquiries, please contact your retailer or the JINGSHA customer support directly. Keep your proof of purchase for warranty claims.
Contact information can typically be found on the seller's webсайта або ўпакоўкі прадукту.
