KALOC UT75

KALOC UT75 Full Motion TV Wall Mount Instruction Manual

Model: UT75 | Brand: KALOC

1. Уводзіны

Thank you for choosing the KALOC UT75 Full Motion TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV mount. The UT75 is designed to securely hold 55-75 inch LCD/LED televisions, offering full motion capabilities including tilt and swivel for optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or death.

  • This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
  • Ensure the mounting surface (wall) can safely support the combined weight of the mount and your TV.
  • Do not exceed the maximum weight capacity of 40kg (88lbs).
  • Verify your TV's VESA pattern is compatible with the mount (200x200mm to 600x400mm).
  • Use only the provided mounting hardware. If any parts are missing or damaged, contact KALOC support immediately.
  • Не дапускайце дзяцей і хатніх жывёл падчас ўстаноўкі.
  • Avoid installing the mount near heat sources, direct sunlight, or areas with high humidity.
  • Перыядычна правярайце ўсе шрубы і злучэнні, каб пераканацца ў іх надзейнасці.

3. Змесціва ўпакоўкі

Please check to ensure all components are present and undamaged before beginning installation. If anything is missing or broken, please contact customer support.

  • KALOC UT75 TV Wall Mount Assembly
  • Кранштэйны для мацавання тэлевізара (2 штукі)
  • Насценная пліта
  • Mounting Hardware Kit (screws, anchors, washers, spacers for various TV models and wall types)
  • Інструкцыя па эксплуатацыі (гэты дакумент)
KALOC UT75 Product Box
Figure 3.1: KALOC UT75 Product Packaging

4. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаKALOC
Нумар мадэліУТ75
Назва прадуктуНасценнае мацаванне для тэлевізара Full Motion
МатэрыялSPCC (Cold Rolled Steel)
Сумяшчальны памер тэлевізара55" - 75"
Сумяшчальнасць VESA200x200 мм да 600x400 мм
Кут нахілу-5 ° / + 5 °
Ёмістасць загрузкі40 кг (88 фунты)
Адлегласць да Сцяна30 мм - 363 мм
KALOC UT75 Product Dimensions
Figure 4.1: Product Dimensions (500mm width, 325mm height, 30-363mm wall distance)
KALOC UT75 VESA Compatibility
Figure 4.2: VESA Compatibility (200x200mm to 600x400mm)

5. Ўстаноўка і налада

Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and understand the type of wall you are mounting to (wood stud, concrete, brick). It is highly recommended to have two people for installation.

5.1. Праверкі перад устаноўкай

  1. Check Wall Strength: Confirm your wall can support the combined weight of your TV and the mount.
  2. Locate Studs/Solid Points: Use a stud finder to locate wood studs or ensure you are drilling into solid concrete/brick.
  3. Determine Mounting Height: Decide on the desired height for your TV. The center of the TV should ideally be at eye level when seated.

5.2. Attaching TV Brackets to TV

  1. Асцярожна пакладзеце тэлевізар экранам уніз на мяккую чыстую паверхню, каб пазбегнуць драпін.
  2. Вызначце мантажныя адтуліны VESA на задняй панэлі тэлевізара.
  3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
  4. Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened and evenly spaced.
KALOC UT75 TV Wall Mount with TV Brackets
Figure 5.1: TV Wall Mount Assembly

5.3. Мантаж насценных пласцін

  1. Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal.
  2. Адзначце месцы свідравання праз адтуліны на насценнай пласціне.
  3. Drill pilot holes at the marked locations. For wood studs, drill appropriate size pilot holes. For concrete/brick, use a masonry drill bit and insert wall anchors.
  4. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly.
KALOC UT75 Six Arms Stability Diagram
Figure 5.2: Mount structure with six arms for stability

5.4. Падвешванне тэлевізара

  1. З дапамогай іншай дапамогі асцярожна падніміце тэлевізар з дапамогай прымацаваных кранштэйнаў.
  2. Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated and engaged.
  3. Замацуйце тэлевізар на сцяне з дапамогай ахоўных шруб або фіксуючых механізмаў, якія ўваходзяць у камплект.
  4. Gently test the mount's stability and ensure the TV is securely attached before releasinг гэта.

5.5. Installation Video Overview

For a visual guide on the product and its features, please watch the following video. While it showcases various models, the general principles of full-motion mounts apply.

Video 5.1: KALOC TV Mount Product Overview (Note: This video showcases various models; refer to this manual for UT75 specific instructions.)

6. Аперацыя

The KALOC UT75 mount offers flexible adjustments to achieve your desired viewвопыту.

  • Рэгуляванне нахілу: The TV can be tilted -5°/+5° to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs (if present) or use the provided tool, adjust to the desired angle, and then re-tighten securely.
  • Swivel and Extension: The full-motion arms allow you to swivel the TV left or right and extend it away from the wall (from 30mm to 363mm). Gently push or pull the TV to the desired position.
  • Кабельнае кіраванне: Utilize the integrated cable management features (if present on your model) to route and conceal cables for a clean look.
KALOC UT75 Tilt Adjustment
Figure 6.1: Tilt Adjustment Angle (-5°/+5°)

7. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і бяспечную працу вашага тэлевізара.

  • Уборка: Працірайце мацаванне мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Праверце злучэнні: Periodically (e.g., every 6 months) inspect all mounting screws and bolts to ensure they are still tight and secure.
  • Праверце на наяўнасць пашкоджанняў: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, discontinue use and contact customer support.

8. Выпраўленне непаладак

If you encounter issues with your KALOC UT75 TV mount, refer to the following common problems and solutions:

  • Тэлевізар не стаіць роўна:
    • Пераканайцеся, што насценная пліта ўсталявана ідэальна роўна.
    • Check if the TV brackets are evenly attached to the TV.
    • Some mounts have a post-installation leveling adjustment feature; consult the specific instructions for your model.
  • Мацаванне адчуваецца няроўным або няўстойлівым:
    • Immediately remove the TV from the mount.
    • Re-check all wall mounting bolts and TV bracket screws to ensure they are fully tightened.
    • Verify the wall structure is adequate and the anchors (if used) are properly installed.
    • Ensure the TV's weight does not exceed the mount's capacity.
  • Цяжкасці з рэгуляваннем нахілу/павароту:
    • Ensure any locking knobs or screws for tilt adjustment are loosened before attempting to adjust.
    • Apply gentle, even pressure when moving the TV. Do not force it.

Калі гэтыя дзеянні не вырашаць вашу праблему, звярніцеся ў службу падтрымкі кліентаў.

9. Карыстальніцкія парады

  • Consider using a cable management sleeve or ties to bundle and hide cables running from your TV to other devices for a cleaner aesthetic.
  • When adjusting the TV's position, always hold the TV firmly with both hands to prevent accidental drops.
  • Для аптым viewing, adjust the tilt and swivel based on your seating position and room lighting conditions.

10. Гарантыя і падтрымка

For any questions, technical assistance, or warranty claims, please contact KALOC customer support.

Кантакт службы падтрымкі:
WhatsApp: +86 15013439327

Please have your model number (UT75) and purchase information ready when contacting support.

Documents - KALOC – UT75

няма адпаведных дакументаў

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.