Vgate iCar2 BT3.0 OBD2 Scanner User Manual

1. Прадукт скончыўсяview

The Vgate iCar2 BT3.0 is an On-Board Diagnostics (OBD) connector device designed to provide comprehensive vehicle diagnostics. It features a standard 16-pin OBD interface on one end, connecting to your vehicle's OBD port. The other end facilitates communication with external devices, such as Android smartphones or tablets, via Bluetooth 3.0. This tool is primarily used for data communication and power supply to diagnostic equipment, allowing you to read and clear fault codes, monitor real-time vehicle performance, and analyze various engine parameters.

2. Тэхнічныя характарыстыкі

Supported OBD-II Protocols:

• SAE J1850 ШІМ (41.6Kbaud)
• SAE J1850 VPW (10.4Kbaud)
• ISO9141-2 (5 бод ініцыялізацыі, 10.4 Кбод)
• ISO14230-4 KWP (5 бод-ініт, 10.4 Кбауд)
• ISO14230-4 KWP (хуткі ініт, 10.4 Кбауд)
• ISO15765-4 CAN (11-бітны ідэнтыфікатар, 500 Кбод)
• ISO15765-4 CAN (29-бітны ідэнтыфікатар, 500 Кбод)
• ISO15765-4 CAN (11-бітны ідэнтыфікатар, 250 Кбод)
• ISO15765-4 CAN (29-бітны ідэнтыфікатар, 250 Кбод)
• SAE J1939 CAN (29bit ID, 250*Kbaud)
• USER1 CAN (11*bit ID, 125*Kbaud)
• USER2 CAN (11*bit ID, 50*kbaud)

3. Асноўныя магчымасці

• Чытанне і ачыстка кодаў памылак: Access and interpret both standard and manufacturer-specific diagnostic trouble codes (DTCs), then clear them to turn off the Malfunction Indicator Lamp (MIL), or 'Check Engine' light.
• Real-time Performance Monitoring: Display live operating parameters such as vehicle speed, engine RPM, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, oxygen sensor values, and air intake temperature.
• Fuel Consumption Measurement: Monitor and measure your vehicle's fuel consumption.
• Рэгістрацыя даных: Record various parameters and download data to external media for later analysis and printing.
• Real-time Graphics: Display recorded data and live parameters in graphical format for easy interpretation.
• Аўтаматычнае абуджэнне і рэжым сну: The iCar2 can automatically detect when the vehicle starts and stops, activating and deactivating itself without manual intervention.

4. Ўстаноўка і налада

1. Locate the Vehicle OBD Port: Enter the driver's cabin and find your vehicle's 16-pin female OBD port. This port is typically located under the steering wheel, often near the knees.
2. Connect to the Vehicle: Align the male OBD connector of the iCar2 device with the vehicle's OBD port. Insert it firmly and steadily until it is fully seated and clicks into place.
3. Уключыце запальванне аўтамабіля: Turn the car ignition to the 'ON' position (engine does not need to be running, but power must be supplied to the OBD port).
4. Спампаваць прыкладанне: Download a compatible OBD-II diagnostic application (e.g., 'OBD Auto Doctor', 'Torque', 'DashCommand') from your device's app store (Android).
5. Уключыць Bluetooth: On your Android device, enable Bluetooth.
6. Падключыце прыладу: Open the diagnostic application. Navigate to the 'Settings' or 'Connectivity' section within the app. Select 'Bluetooth' and choose 'Vgate' or 'iCar2' from the list of available devices. Ensure the connection is secure and the device powers on and starts normally. The connection is now complete!

5. Інструкцыя па эксплуатацыі

Once the Vgate iCar2 BT3.0 is connected to your vehicle and paired with your Android device via Bluetooth, you can begin using your chosen diagnostic application to access vehicle data.

Агульныя аперацыі:

• Чытанне кодаў памылак: In your diagnostic app, navigate to the 'Diagnostics' or 'Fault Codes' section. The app will scan the vehicle's Electronic Control Units (ECUs) and display any stored Diagnostic Trouble Codes (DTCs) along with their descriptions.
• Ачыстка кодаў памылак: After addressing any issues, you can clear the fault codes from the app. This will turn off the 'Check Engine' light. Ensure the underlying problem is resolved before clearing codes, as they may reappear.
• Viewатрыманне жывых дадзеных: Access the 'Live Data' or 'Sensors' section to view real-time parameters such as engine RPM, vehicle speed, coolant temperature, fuel system status, and more. Many apps allow you to customize the display with gauges, graphs, or digital readouts.
• Trip Analysis: Some applications offer features to analyze trip data, including mileage, fuel consumption, travel time, and average speed.
• Warning Scenarios: Advanced apps may allow you to set up custom warning scenarios based on specific vehicle parameters, such as high fuel consumption or engine temperature.

Software Display Exampлес:

6. Тэхнічнае абслугоўванне

• Уборка: Use a soft, dry cloth to clean the exterior of the device. Avoid using harsh chemicals or abrasive cleaners, which could damage the casinг або электронных кампанентаў.
• захоўванне: When not in use, store the iCar2 in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it protected from dust and moisture.
• Парты злучэння: Periodically check the OBD connector pins for any signs of corrosion or damage. Ensure they are clean and free of debris to maintain a reliable connection.

7. Выпраўленне непаладак

Прылада не ўключаецца:

• Ensure the iCar2 is fully seated in the vehicle's OBD port.
• Verify that the vehicle's ignition is turned to the 'ON' position (or the engine is running) to supply power to the OBD port.
• Check the vehicle's fuse box for any blown fuses related to the OBD port.

Немагчыма падключыцца праз Bluetooth:

• Make sure Bluetooth is enabled on your Android device.
• Ensure the iCar2 is within the Bluetooth range (typically 10-20 meters).
• Close and reopen the diagnostic application.
• Try unpairing and re-pairing the iCar2 from your device's Bluetooth settings.
• Restart both your Android device and the vehicle (by turning ignition off and on).

App shows 'No Connection' or 'Adapter Not Found':

• Confirm that the correct connection type (Bluetooth) is selected in the app's settings.
• Verify that the app is configured to connect to the 'Vgate' or 'iCar2' device.
• Пераканайцеся, што праграма абноўлена.
• Try a different compatible diagnostic app to rule out app-specific issues.

Inaccurate or missing data:

• Ensure the vehicle is fully compatible with OBD-II protocols.
• Check for any loose connections between the iCar2 and the OBD port.
• Some older vehicles or specific models may not support all OBD-II parameters.

8. Карыстальніцкія парады

• Vehicle Off for Connection: Always connect or disconnect the iCar2 device when the vehicle is turned off and powered down. This prevents interference with vehicle systems and potential accidents.
• Сумяшчальнасць прыкладанняў: While the iCar2 is compatible with many OBD-II apps, some users find 'Torque' or 'OBD Auto Doctor' to be particularly effective for Android devices. Experiment to find the app that best suits your needs.
• Leverage Auto Sleep: The automatic wake-up and sleep function is designed for convenience. You can leave the iCar2 plugged in, and it will manage its power state with your vehicle's ignition, saving you the hassle of plugging/unplugging it every time.
• Абмежаванні магутнасці: Be mindful that the OBD port's power supply is limited. Ensure any connected devices operate within specified power requirements to avoid damaging vehicle circuits or fuses.

9. Гарантыя і падтрымка

For technical support, warranty claims, or further assistance with your Vgate iCar2 BT3.0 OBD2 Scanner, please contact the OBDIIVCI Official Store directly. Refer to your purchase documentation for specific contact details or visit the official store page on the platform where the product was purchased.

This product is not intended to replace professional diagnostic tools. For complex vehicle repair issues, always consult authorized service providers.

Кіраўніцтва карыстальніка ў фармаце PDF даступна для запампоўкі: View Кіраўніцтва карыстальніка (PDF)