1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA X99 MAX Motherboard Gaming Combo Set. This set includes the X99 MAX motherboard, an Intel Xeon E5 2683 V4 CPU, and 64GB (4x16GB) DDR4 2133MHz REG ECC Memory. Please read this manual carefully before proceeding with installation to ensure proper setup and optimal performance.
2. Змесціва ўпакоўкі
Your JINGSHA X99 MAX Motherboard Gaming Combo Set package should contain the following items:
- 1 x JINGSHA X99 MAX Motherboard
- 1 x Intel Xeon E5 2683 V4 CPU (16 cores/32 threads)
- 4 x 16GB DDR4 2133MHz REG ECC Memory modules (total 64GB)
- 1 х I/O Shield
- 1 х кабель SATA
Please inspect all components for any signs of damage upon unboxing. If any items are missing or damaged, contact your vendor immediately.
3. Тэхнічныя характарыстыкі
Below are the detailed specifications for the components included in your combo set:
3.1. CPU (Intel Xeon E5 2683 V4)
- Серыя працэсара: Xeon E5 2683 V4
- Ядры/Патокі: 16 cores / 32 threads
- Асноўная частата: 2.1 ГГц
- Тып разеткі: LGA 2011-3
- L3 Cache: 40 МБ
- Тэхналогія: 14 нм
- Power Consumption (TDP): 120 Вт
3.2. Memory (DDR4 REG ECC)
- Чып: SEC / HY / MT / MIC (shipped randomly)
- Тып: ECC REG (памяць сервера)
- Частата: DDR4 2133 МГц
- Ёмістасць: 64GB (4 x 16GB modules)
3.3. Motherboard (JINGSHA X99 MAX)
| частка | Апісанне |
|---|---|
| Працэсар | LGA2011-3 / Intel Xeon CPU |
| Набор мікрасхем | C612 |
| Памяць | 8*UDIMM DDR4, Quad channel, Up to 256GB |
| Захоўванне | 7*SATA3.0 Port, 1*M.2 2280 NVMe 3.0x4 Port, 1*M.2 2280 NGFF SATA3.0 Protocol SSD Port |
| USB | 8*USB2.0 Ports, 4*USB 5Gbps Ports |
| лакальная сетка | 1*RTL8111H, 1000Mbps Ethernet |
| Аўдыё | ALC897 5.1 Channel HD Audio Chip |
| BIOS | BIOS AMI EFI |
| Back Panel connectors | 2*USB 5Gbps Ports, 6*USB2.0 Ports, 1*RJ45 LAN Port, 1*Audio 3-in-1 (Line-out/Line-in/MIC) |
| Other Onboard connectors | 1*4pin CPU Smart FAN header, 1*SYS FAN header, 1*Front Audio header, 1*USB5Gbps header (for two USB5Gbps ports), 1*USB2.0 header (for two USB2.0 ports), 1*RS232 COM header, 1*Front control panel header, 1*Speaker header, 1*CMOS header, 1*power on header, 1*24pin ATX connector, 1*8pin 12V connector |
| Слот для пашырэння | 1*PCIE3.0 x16 slot, 1*PCIE3.0 x4 slot |
| Формаў-фактар | Micro-ATX 244mm*221mm |

Figure 1: JINGSHA X99 MAX Motherboard Product Parameters

Figure 2: Key Features of JINGSHA X99 MAX Motherboard

Figure 3: Motherboard Construction with Solid State Capacitors, SATA3.0, Multilayer PCB, and Aluminum Heatsink
4. Настройка і ўстаноўка
Before starting, ensure you have a powerful power supply (at least 700W brand power supply) to support this platform.
4.1. Усталёўка працэсара
Follow these steps carefully to install the CPU:
- крок 1: Open the pressure bar on the CPU socket as shown in the figure. Then, open the buckle cover of the CPU base.
- крок 2: When placing the CPU into the slot, pay close attention to the four defense silent notches and align the gold mountain corner on the CPU with the golden corner of the motherboard. Be extremely careful not to bend any pins.
- крок 3: Re-buckle the previously opened lever to secure the CPU.

Figure 4: Step-by-step CPU Installation Guide
4.2. Усталёўка цвёрдацельнага назапашвальніка M.2
Install the M.2 SSD correctly to prevent the interface from falling off due to stress. Ensure it is seated firmly and secured.

Figure 5: Correct M.2 SSD Installation
4.3. Размяшчэнне матчынай платыview
Familiarize yourself with the motherboard's layout for connecting various components.

Figure 6: X99 MAX Motherboard Layout with Key Connectors

Figure 7: Rear I/O Ports including USB, Ethernet, and Audio
5. Інструкцыя па эксплуатацыі
Once all components are correctly installed and connected, you can power on your system. The JINGSHA X99 MAX motherboard supports LGA 2011-3 Intel Xeon CPUs (V3 and V4 series) and up to 256GB of Quad-channel DDR4 memory. Ensure your operating system and drivers are installed for full functionality.
5.1. Доступ да BIOS
To access the BIOS/UEFI settings, typically press the 'DEL' or 'F2' key repeatedly during system startup. Refer to the motherboard's specific documentation or on-screen prompts for the exact key.
5.2. Ўстаноўка драйвера
After installing your operating system, install the necessary drivers for the chipset, LAN, audio, and other onboard components. Drivers can be obtained by contacting customer service.
6. Тэхнічнае абслугоўванне
Regular maintenance helps ensure the longevity and stable operation of your system.
- Выдаленне пылу: Periodically clean dust from the motherboard, CPU cooler, and case fans using compressed air.
- Батарэя CR2032: The CR2032 battery (CMOS battery) on the motherboard is typically removed before shipping due to shipping regulations. You may need to install a new CR2032 battery for the system clock and BIOS settings to retain information when the system is powered off.

Figure 8: Note regarding CR2032 battery removal for shipping
6.1. CPU Warranty Label
The CPU comes with a warranty label on its back. Do not tear off this label, as it is required to prove the product's authenticity for warranty claims. The label does not affect CPU usage.

Figure 9: CPU with Warranty Label
7. Выпраўленне непаладак
Калі ў вас узніклі праблемы, улічыце наступнае:
- Няма харчавання: Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected. Verify your power supply meets the minimum 700W requirement.
- Няма дысплея: Check that your graphics card (if dedicated) is properly seated and connected to the monitor. Ensure RAM modules are correctly installed in their slots.
- Нестабільнасць сістэмы: This can be caused by insufficient power, overheating, or incompatible components. Check temperatures and ensure adequate cooling.
- BIOS/Driver Issues: If you experience issues related to system recognition or performance, ensure you have the latest BIOS and drivers. Contact customer service for BIOS files і драйверы.
For complex issues, it is recommended to consult a qualified technician or contact customer support.
8. Карыстальніцкія парады
- Always handle components with care, especially the CPU and motherboard, to avoid bending pins or damaging sensitive parts.
- When installing the CPU, ensure correct orientation by aligning the gold triangle/notch on the CPU with the corresponding mark on the socket.
- For optimal performance, ensure proper airflow within your PC case to prevent overheating, especially with high-performance components like the Xeon E5 CPU.
- If upgrading or changing components, always refer to the motherboard's specifications for compatibility.
9. Гарантыя і падтрымка
Your JINGSHA X99 MAX Motherboard Gaming Combo Set comes with the following warranty:
- працэсар: 1-year warranty (used, good condition)
- Памяць: 1-year warranty (used, good condition)
- Матчына плата: Please refer to your purchase agreement for specific motherboard warranty details.
For any technical assistance, BIOS files, or drivers, please contact customer service. Ensure you retain your proof of purchase for warranty claims.





