Jebao SW, RW, OW, SOW Series

Jebao Wave Pump Instruction Manual

Models: SW, RW, OW, SOW Series

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your Jebao Wave Pump. Designed for both freshwater and saltwater aquariums, these pumps utilize advanced Sine Wave Technology to create natural water movement, promoting a healthy environment for your aquatic life. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Прадукт скончыўсяview

The Jebao Wave Pump series includes various models (SW, RW, OW, SOW) each designed to provide efficient and quiet water circulation. Key features include variable frequency control, a durable ceramic shaft, and a user-friendly controller for customizing wave patterns and flow rates.

Jebao Wavemaker pump with controller
Figure 1: Jebao Wavemaker pump and controller, highlighting variable frequency, quiet operation, ceramic shaft, and suitability for freshwater and seawater.
Збоку view of a Jebao wave pump unit
Малюнак 2: бок view of a Jebao wave pump, showing its compact design.

3. Тэхнічныя характарыстыкі

Refer to the tables below for detailed specifications of each model. Dimensions are approximate and may vary slightly.

3.1. OW Series Specifications

OW Series Wave Pump Specifications and Dimensions
Figure 3: OW Series models with dimensions and technical specifications.
мадэль тtage Ваты Max. (L/h) Tank Size (cm) Tank Thickness (mm)
ОВ-10 24 В пастаяннага току 12 4000 40-70 ≤10
ОВ-25 24 В пастаяннага току 23 8500 70-100 ≤12
ОВ-40 24 В пастаяннага току 35 15000 100-150 ≤15
ОВ-50 24 В пастаяннага току 50 20000 150-200 ≤19
OW-10 Wave Pump with Controller and Dimensions
Figure 4: OW-10 model pump and controller with dimensions.
OW-25 Wave Pump with Controller and Dimensions
Figure 5: OW-25 model pump and controller with dimensions.
OW-40 Wave Pump with Controller and Dimensions
Figure 6: OW-40 model pump and controller with dimensions.
OW-50 Wave Pump with Controller and Dimensions
Figure 7: OW-50 model pump and controller with dimensions.

3.2. SW Series Specifications

SW Series Wave Pump Specifications and Dimensions
Figure 8: SW Series models with dimensions and technical specifications.
мадэль тtage Ваты Max. (L/h) Tank Size (cm) Tank Thickness (mm)
SW-2 12 В пастаяннага току 5 2500 30-40 ≤8
SW-4 24 В пастаяннага току 10 4000 60-80 ≤8
SW-8 24 В пастаяннага току 23 8000 80-100 ≤15
SW-15 24 В пастаяннага току 40 13000 100-150 ≤19
SW-2 Wave Pump with Controller and Dimensions
Figure 9: SW-2 model pump and controller with dimensions.
SW-4 Wave Pump with Controller and Dimensions
Figure 10: SW-4 model pump and controller with dimensions.
SW-8 Wave Pump with Controller and Dimensions
Figure 11: SW-8 model pump and controller with dimensions.
SW-15 Wave Pump with Controller and Dimensions
Figure 12: SW-15 model pump and controller with dimensions.

3.3. SOW Series Specifications

SOW Series Wave Pump Specifications and Dimensions
Figure 13: SOW Series models with dimensions and technical specifications.
мадэль тtage Ваты Max. (L/h) Tank Size (cm) Tank Thickness (mm)
SOW-4 24 В пастаяннага току 12 4000 ≤60 ≤8
SOW-8 24 В пастаяннага току 23 8500 60-100 ≤8
SOW-15 24 В пастаяннага току 35 15000 100-150 ≤15
SOW-20 24 В пастаяннага току 50 20000 150-200 ≤19
SOW-4 Wave Pump with Controller and Dimensions
Figure 14: SOW-4 model pump and controller with dimensions.
SOW-8 Wave Pump with Controller and Dimensions
Figure 15: SOW-8 model pump and controller with dimensions.
SOW-15 Wave Pump with Controller and Dimensions
Figure 16: SOW-15 model pump and controller with dimensions.
SOW-20 Wave Pump with Controller and Dimensions
Figure 17: SOW-20 model pump and controller with dimensions.

3.4. RW Series Specifications

RW Series Wave Pump Specifications and Dimensions
Figure 18: RW Series models with dimensions and technical specifications.
мадэль тtage Ваты Max. (L/h) Tank Size (cm) Tank Thickness (mm)
RW-4 24 В пастаяннага току 10 4000 ≤60 ≤8
RW-8 24 В пастаяннага току 23 8000 60-100 ≤8
RW-15 24 В пастаяннага току 40 13000 100-150 ≤15
RW-20 24 В пастаяннага току 60 20000 100-150 ≤19
RW-4 Wave Pump with Controller and Dimensions
Figure 19: RW-4 model pump and controller with dimensions.
RW-8 Wave Pump with Controller and Dimensions
Figure 20: RW-8 model pump and controller with dimensions.
RW-15 Wave Pump with Controller and Dimensions
Figure 21: RW-15 model pump and controller with dimensions.
RW-20 Wave Pump with Controller and Dimensions
Figure 22: RW-20 model pump and controller with dimensions.

4. Інструкцыі па ўсталёўцы

  1. Распакуйце кампаненты: Carefully remove the wave pump, controller, and power adapter from the packaging. Inspect all components for any damage.
  2. Усталюйце помпу:
    • Position the pump inside your aquarium at the desired location, ensuring it is fully submerged.
    • Attach the external magnetic mount to the outside of the aquarium glass, directly opposite the pump. The strong magnets will hold the pump securely in place.
    • Ensure your tank glass thickness is within the recommended limits for your specific model (e.g., ≤8mm for RW-4/8, SW-2/4, SOW-4/8; ≤10mm for OW-10; ≤12mm for OW-25; ≤15mm for RW-15, SW-8, OW-40, SOW-15; ≤19mm for RW-20, SW-15, OW-50, SOW-20).
  3. Падключыце кантролер:
    • Connect the pump cable to the designated port on the wavemaker controller.
    • Connect the power adapter to the controller, then plug the adapter into a suitable power outlet.
  4. Першапачатковае ўключэнне: Once all connections are secure and the pump is submerged, plug in the power adapter. The pump should start operating according to its default settings.
Jebao Wavemaker controller with buttons and dial
Figure 23: Close-up of the Wavemaker controller, showing various control buttons and the speed dial.

5. Інструкцыя па эксплуатацыі

The wavemaker controller allows you to customize the pump's operation. Familiarize yourself with the buttons and dial:

  • Кнопка рэжыму: Press to cycle through different wave patterns (W1, W2, Else, H, C).
    • W1 Mode: Classic wave mode, adjustable via the speed dial.
    • W2 Mode: Sine wave mode, adjustable via the speed dial.
    • Else Mode: Random flow mode, simulating natural ocean currents.
    • Рэжым H: Constant flow mode, adjustable speed.
    • Рэжым C: Alternating flow mode (Master/Slave setup required for two pumps).
  • Speed Dial (Fast/Slow): Rotate the dial to adjust the flow rate or wave intensity.
  • Кнопка падачы: Activates a 10-minute feeding mode, temporarily stopping the pump to allow fish to eat without food being swept away. Press again to resume normal operation.
  • Night Button (Light Sensor): Activates night mode. The built-in light sensor will detect low light conditions and automatically reduce pump speed or switch to a calmer flow pattern.
  • Кнопка блакіроўкі: Locks the current settings to prevent accidental changes. Press again to unlock.
  • Перамыкач галоўны/падпарадкаваны: For setups with multiple pumps, set one controller to 'Master' and others to 'Slave' to synchronize wave patterns.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and efficient operation of your wave pump:

  1. Адключыць харчаванне: Заўсёды адключайце помпу ад разеткі перад выкананнем любога тэхнічнага абслугоўвання.
  2. Чыстае крыльчатка: Periodically remove the pump from the aquarium and carefully disassemble the impeller housing. Clean the impeller and its shaft with a soft brush to remove any algae, debris, or calcium buildup.
  3. Праверце кабелі і злучэнні: Check all cables and connections for signs of wear, damage, or corrosion. Ensure they are securely plugged in.
  4. Clean Pump Body: Wipe down the exterior of the pump and magnetic mount to remove any buildup.
  5. Зборка і тэставанне: Reassemble the pump, ensuring all parts are correctly fitted. Place it back in the aquarium, plug it in, and test its operation.

7. Выпраўленне непаладак

If your wave pump is not functioning as expected, refer to the following common issues and solutions:

  • Помпа не запускаецца:
    • Ensure the power adapter is securely plugged into both the controller and the wall outlet.
    • Check if the pump cable is firmly connected to the controller.
    • Пераканайцеся, што разетка працуе.
    • Inspect the impeller for any obstructions that might prevent it from spinning.
  • Weak Flow or No Flow:
    • Ачысціце крыльчатку і корпус помпы, каб выдаліць смецце або назапашванні водарасцяў.
    • Ensure the pump is fully submerged and not drawing air.
    • Adjust the speed dial on the controller to a higher setting.
    • Check if the pump is in "Feed" mode; press the Feed button to resume normal operation.
  • Празмерны шум:
    • Check for any foreign objects lodged in the impeller.
    • Ensure the pump is securely mounted and not vibrating against the tank glass.
    • Verify that the impeller is correctly seated and not damaged.
  • Кантролер не адказвае:
    • Unplug the power adapter, wait 30 seconds, and plug it back in to reset the controller.
    • Ensure the 'Lock' button is not engaged.

8. Карыстальніцкія парады

Ніякіх канкрэтных парад карыстальнікам ад re не было атрыманаviewабо пытанні і адказы па гэтым прадукце.

9. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі, тэхнічнай падтрымцы або абслугоўванні, звярніцеся непасрэдна да прадаўца або вытворцы. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Звязаныя дакументы - SW, RW, OW, SOW Series

прэview Кіраўніцтва карыстальніка хвалепаточнага помпы Jebao: CP-90, CP-120, CP-150
Кіраўніцтва карыстальніка для помпаў Jebao Cross-Flow Wave мадэляў CP-90, CP-120 і CP-150. Уключае інструкцыі па тэхніцы бяспекі, інструкцыі па зборцы, эксплуатацыі кантролера, тэхнічным абслугоўванні і тэхнічныя характарыстыкі.
прэview Jebao Jecod DMP Series Smart Wave Maker User Manual
Comprehensive user manual for the Jebao Jecod DMP series Smart Wave Maker, detailing installation, operation, app control, wave modes, troubleshooting, and maintenance for aquarium enthusiasts.
прэview Jebao MDC Series Aquarium Pumps User Manual
User manual for Jebao MDC series aquarium pumps, detailing features, safety instructions, installation, operation, and technical specifications. Includes models MDC-2000 to MDC-10000.
прэview Jebao MLW Series Smart Wave Maker User Manual
Comprehensive user manual for the Jebao MLW Series Smart Wave Maker (models MLW-5, MLW-10, MLW-20, MLW-30). Includes installation, Wi-Fi configuration, app setup, and maintenance instructions.
прэview Jebao Smart Wave Maker MLW Series User Manual
Comprehensive user manual for the Jebao Smart Wave Maker MLW Series (MLW-5, MLW-10, MLW-20, MLW-30), covering setup, Wi-Fi configuration, app control, pump functions, and maintenance for aquarium enthusiasts.
прэview Кіраўніцтва карыстальніка Jebao Smart Wave Maker - Налада, эксплуатацыя і ліквідацыя непаладак
Падрабязнае кіраўніцтва карыстальніка для Jebao Smart Wave Maker (серыі MCP, MLW, MOW), якое ахоплівае ўстаноўку, функцыі, кіраванне праз праграму Jebao Aqua, розныя рэжымы хваль, ліквідацыю непаладак і тэхнічнае абслугоўванне. Даведайцеся, як наладзіць і кіраваць хвалегенератарам Jebao для аптымальных умоў у акварыуме.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.