Newfast NF-B912

Newfast NF-B912 5.8GHz Outdoor Wireless Bridge

Кіраўніцтва карыстальніка

мадэль: NF-B912 | Марка: Newfast

1. Уводзіны

The Newfast NF-B912 is a high-performance 5.8GHz outdoor wireless bridge designed for long-range wireless signal transmission, particularly suitable for security monitoring projects and extending network coverage over distances up to 3 kilometers (1.8 miles). It offers stable network transmission with flexible installation and simple configuration, functioning as a wireless repeater, extender, access point, or client router.

Newfast NF-B912 Outdoor Wireless Bridge overview
Figure 1: Newfast NF-B912 Outdoor Wireless Bridge, highlighting 100Mbps, 3KM range, and 5.8GHz frequency.

2. Тэхнічныя характарыстыкі

Асаблівасць Апісанне
Назва мадэлі NF-B912
Тып Бесправадной адкрыты мост
Падтрымліваемая частата Wi-Fi 5.8 ГГц (5.180–5.825 ГГц)
Хуткасць бесправадной перадачы 300 Мбіт/с
Стандарт перадачы Wi-Fi IEEE802.11a/an
Хуткасць правадной перадачы 10/100 Мбіт/с
Максімальная хуткасць перадачы дадзеных па лакальнай сетцы 300 Мбіт/с
Тып антэны Internal 11dBi 5.8GHz Antennas
Набор мікрасхем Qualcomm AR9344 560MHz Industrial CPU
Памяць RAM: DDR 64MB; Flash: 8MB
Магутнасць AmpЛіфіер (Пенсільванія) SKY85735
WAN парты 1 порт Ethernet 10/100 Мбіт/с RJ45
Парты LAN 1 порт Ethernet 10/100 Мбіт/с RJ45
Other Physical Ports 1 x RESET Button
Паказчыкі Power, WAN, LAN, WiFi, Signal Strength (1-4 bars)
Адаптар сілкавання 48 В POE
Спосаб ўстаноўкі На слупах
Функцыі Брандмаўэр, QoS, VPN, VoIP
Ужыванне SOHO, Home, Outdoor Long-Distance Coverage
Падтрымлівае WPS няма
Падтрымка WDS няма
Апорная сетка так
Атэстацыя CE
Newfast NF-B912 11dBi Antenna and outdoor features
Figure 2: The NF-B912 features an 11dBi antenna for long-distance coverage and is designed to be waterproof, dustproof, freeze-proof, shockproof, oxidation-resistant, and resistant to high and low temperatures.

3. Змесціва ўпакоўкі

Звычайна ў камплект уваходзяць наступныя элементы:

  • 2 x Newfast NF-B912 Outdoor Wireless Bridge Units
  • 4 x Cable Ties (for mounting)
  • 2 x POE Adapters (for power and data over Ethernet)
  • 1 х Кіраўніцтва карыстальніка
  • 1 х гарантыйны талон
  • 1 х сертыфікат

4. Настройка

4.1 Фізічная ўстаноўка

The NF-B912 units are designed for pole-mounted installation. Ensure the units are securely fastened and positioned for optimal line-of-sight between the two bridge units for maximum range and performance.

3KM Point to Point Outdoor Wireless Bridge setup
Figure 3: Point-to-point setup of two NF-B912 units for long-distance wireless transmission.

4.2 Connecting the Devices

Each NF-B912 unit is powered via a Power over Ethernet (POE) adapter. Connect an Ethernet cable from the POE adapter's 'POE' port to the NF-B912's WAN port. Connect another Ethernet cable from the POE adapter's 'LAN' port to your network device (e.g., router, switch, NVR, or computer).

NF-B912 Easy Installation and Port Layout
Figure 4: The bottom of the NF-B912 unit showing WAN, RESET, and LAN ports. The mode switch allows selection between STA (Client) and AP (Access Point/Transmit) modes.

4.3 Initial Configuration and Pairing

The NF-B912 supports automatic bridge pairing for simple operation. Before powering on, set the mode switch on one unit to 'AP' (Access Point/Transmit Mode) and the other unit to 'STA' (Client/Receiving Mode). Once powered on, the units should automatically establish a wireless bridge connection.

Elevator Monitoring Application Diagram
Малюнак 5: Выпample of an Elevator Monitoring Application, illustrating STA Receiving Mode connected to a camera and AP Transmission Mode connected to a monitoring computer via a switch/DVR.

5. Рэжымы працы і функцыі

5.1 Некалькі рэжымаў працы

The NF-B912 can operate in several modes to suit different network requirements:

  • Рэжым моста: Establishes a point-to-point or point-to-multipoint wireless link between two or more networks.
  • Рэжым кропкі доступу (AP): Allows wireless clients to connect to a wired network.
  • Рэжым рэтранслятара: Пашырае радыус дзеяння існуючай бесправадной сеткі.
  • Рэжым маршрутызатара: Functions as a basic router, providing network address translation (NAT) and DHCP services.
NF-B912 Multiple Functions and Web Інтэрфейс
Figure 6: The NF-B912 supports multiple functions including Bridge, AP, Repeater, and Router modes, configurable via a web-інтэрфейс.

5.2 Індыкатары сілы сігналу

The unit features a 4-bar signal strength indicator light, allowing for accurate and intuitive alignment during installation. Adjust the direction and angle of the device until the maximum number of signal bars are lit for optimal performance.

  • Very Strong: All 4 signal bars lit
  • Моцны: 3 signal bars lit
  • Сярэдні: 2 signal bars lit
  • Дрэнна: 1 signal bar lit

Other indicators include Power, WAN, LAN, and WiFi status lights.

NF-B912 Signal Strength Indicators and Dimensions
Малюнак 7: падрабязна view of the NF-B912's LED indicators, including Power, WAN, LAN, WiFi, and the 4-bar signal strength indicator. Dimensions are also shown: 85mm width, 165mm height, 43.5mm depth.

5.3 Бяспека сеткі

The NF-B912 incorporates features to ensure network security:

  • Схаванне SSID: The wireless bridge function can be configured to hide the SSID, preventing unauthorized wireless terminals from searching for the network.
  • Шыфраванне: Supports various encryption protocols to protect user network data.
  • Anti-Hijack, Anti-Hacker, Anti-Trojan: Built-in protections against common network threats.
NF-B912 Network Security Features
Figure 8: Illustration of NF-B912's network security features, including anti-hijack, anti-hacker, anti-trojan, and encryption, supported by high-performance QCA and FEM chips.

5.4 Web Інтэрфейс кіравання

The device can be configured and managed through a web-based interface. Access this interface by connecting a computer to the LAN port of the POE adapter and entering the device's default IP address in a web browser. The interface supports multiple languages (English, German, French, Italian, Spanish, Japanese) for ease of use.

6. Тэхнічнае абслугоўванне

  • Уборка: Periodically clean the exterior of the device with a soft, dry cloth to remove dust and debris. Ensure no moisture enters the device.
  • Абнаўленні прашыўкі: Праверце вытворцы webсайт для атрымання даступных абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і бяспеку. Уважліва выконвайце прадстаўленыя інструкцыі пры абнаўленні прашыўкі.
  • Умовы навакольнага асяроддзя: Ensure the device operates within its specified temperature and humidity ranges. While designed for outdoor use, extreme conditions can impact longevity.

7. Выпраўленне непаладак

7.1 Няма харчавання

  • Ensure the POE adapter is correctly connected to a power source and the NF-B912 unit.
  • Check the power indicator light on the NF-B912 and the POE adapter.
  • Пераканайцеся, што разетка працуе.

7.2 Няма бесправаднога злучэння

  • Verify that both units are powered on and their respective mode switches are correctly set (one AP, one STA).
  • Check the signal strength indicator lights. If they are low or off, adjust the alignment of the units to improve line-of-sight.
  • Ensure there are no significant obstructions between the two units.
  • If automatic pairing fails, try resetting both units to factory defaults using the RESET button and reconfigure.

7.3 Павольная хуткасць сеткі

  • Check the signal strength indicators; a weak signal will result in lower speeds.
  • Ensure the wired connections are 10/100Mbps compatible and cables are not damaged.
  • Minimize interference from other 5GHz devices in the area.
  • Check for any bandwidth-intensive applications running on the network.

7.4 Немагчыма атрымаць доступ Web Інтэрфейс кіравання

  • Ensure your computer is directly connected to the LAN port of the POE adapter.
  • Verify your computer's IP address is in the same subnet as the NF-B912's default IP address (or configured IP).
  • Паспрабуйце ачысціць кэш браўзера або скарыстацца іншым браўзерам.
  • Калі IP-адрас быў зменены і забыты, можа спатрэбіцца скінуць налады да заводскіх.

8. Карыстальніцкія парады

  • For optimal performance, always ensure a clear line-of-sight between the two bridge units. Even small obstructions like trees can degrade signal quality over long distances.
  • When setting up, use the signal strength LEDs to fine-tune the aiming of each unit. Small adjustments can make a big difference.
  • Consider using shielded Ethernet cables for outdoor installations to protect against environmental factors and electrical interference.
  • Regularly check the manufacturer's support page for firmware updates, which can improve stability and add new features.

9. Гарантыя і падтрымка

This product comes with a Warranty Card included in the package. Please refer to the Warranty Card for detailed information regarding warranty coverage, terms, and conditions. For technical support or further assistance, please contact your retailer or the manufacturer's customer service.

Звязаныя дакументы - NF-B912

прэview NEWFAST NF-A882 Outdoor AP Quick Installation Guide
A quick installation guide for the NEWFAST NF-A882 Outdoor WiFi Extender/Access Point, covering product installation, device connection, configuration modes (AP, Bridge, Router, Repeater), and troubleshooting.
прэview Кіраўніцтва карыстальніка бесправаднога моста UeeVii CPE688 - пашыральнік сеткі далёкага радыусу дзеяння 5.8 ГГц
Падрабязнае кіраўніцтва карыстальніка для бесправаднога моста UeeVii CPE688, у якім падрабязна апісаны ўстаноўка, канфігурацыя, ліквідацыя непаладак і спецыфікацыі пашырэння сеткі "кропка-кропка" і "кропка-шматкропка" на дыяпазоне 5.8 ГГц.
прэview Кіраўніцтва карыстальніка бесправаднога моста ULNA CPE412 - пашырэнне сеткі далёкага радыусу дзеяння 5.8 ГГц
Падрабязнае кіраўніцтва карыстальніка для бесправаднога моста ULNA CPE412. Даведайцеся пра яго характарыстыкі, камплектацыю, падрабязнасці інтэрфейсу, святлодыёдныя індыкатары, кароткае кіраўніцтва па ўсталёўцы, працэдуры ўстаноўкі, прыклады прымянення, web доступ да інтэрфейсаў і ліквідацыя непаладак для надзейнага падключэння да бесправадной сеткі тыпу «кропка-кропка» і «кропка-шматкропка» на вялікіх адлегласцях.
прэview Кіраўніцтва карыстальніка бесправаднога моста ULNA CPE-609
Падрабязнае кіраўніцтва карыстальніка для бесправаднога моста ULNA CPE-609, у якім падрабязна апісаны налада, усталёўка, дадатковыя налады, ліквідацыя непаладак і тэхнічная падтрымка гэтай прылады бесправадной перадачы дадзеных 5.8 ГГц.
прэview IP-COM iLBE-5ACV1.0-E01 Outdoor CPE Quick Installation Guide
Quick installation guide for the IP-COM iLBE-5ACV1.0-E01 Outdoor CPE, detailing package contents, device overview, assembly, installation, and common network scenarios for CCTV surveillance and wireless hotspot access.
прэview Кіраўніцтва карыстальніка бесправаднога моста UeeVii CPE820
Comprehensive user manual for the UeeVii CPE820 5.8GHz Wireless Bridge, detailing its features, specifications, setup instructions, application cases, advanced settings, and troubleshooting guide for reliable long-distance network connectivity.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.