Aigostar LED Projector User Manual

1. Уводзіны

Thank you for choosing the Aigostar LED Projector. This manual provides essential information for the safe and efficient use of your new LED floodlight. Please read it thoroughly before installation and operation, and retain it for future reference.

The Aigostar LED Projector is designed for high-brightness illumination with maximum energy efficiency. Featuring advanced LED technology, it delivers 750 lumens of cold white light (6500K) at only 10W, offering significant energy savings compared to traditional lighting.

Its robust construction with an IP65 rating ensures reliable performance in various outdoor environments, resistant to moisture, dust, heat, corrosion, and impacts. The ultra-thin design and integrated heat sink contribute to an extended lifespan of over 25,000 hours.

2. Інфармацыя па бяспецы

Калі ласка, выконвайце наступныя меры бяспекі, каб пазбегнуць траўмаў або пашкоджанняў:

• Заўсёды адключайце электрычнасць перад устаноўкай, абслугоўваннем або чысткай.
• Устаноўку павінен выконваць кваліфікаваны электрык у адпаведнасці з мясцовымі электрычнымі нормамі.
• Пераканайцеся, што аб'ём блока харчаванняtage matches the product's specifications (240V AC).
• Не глядзіце непасрэдна ў святлодыёдны дысплей, калі ён уключаны, бо гэта можа прывесці да ператамлення вачэй або іх пашкоджання.
• Не ўносіце ніякіх змяненняў у канструкцыю прадукту. Несанкцыянаваныя мадыфікацыі могуць ануляваць гарантыю і стварыць пагрозу бяспецы.
• Ensure the mounting surface is strong enough to support the fixture securely.
• Трымайце лёгкаўзгаральныя матэрыялы далей ад свяцільні.
• The product is rated IP65 for outdoor use, but avoid submerging it in water.

3. Змесціва ўпакоўкі

Ваш пакет павінен змяшчаць наступныя рэчы:

• Aigostar LED Projector (quantity as purchased, typically a pack of 6)
• Mounting bracket (pre-attached or included)
• Basic mounting hardware (screws, anchors)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Тэхнічныя характарыстыкі

5. Ўстаноўка і налада

The Aigostar LED Projector is designed for flexible installation on ceilings, walls, or floors. Ensure the chosen location provides adequate support and is within reach of a suitable power source.

5.1 Мантаж свяцільні

1. Выберыце Размяшчэнне: Select a desired mounting spot. Consider the beam angle (110°) to ensure optimal light coverage.
2. Адзначце кропкі свідравання: Use the mounting bracket as a template to mark the positions for drilling holes.
3. Свідраваць адтуліны: Drill holes of appropriate size for the provided screws and anchors.
4. Бяспечны кранштэйн: Attach the mounting bracket firmly to the surface using the screws and anchors.
5. Attach Light: Secure the LED projector to the mounted bracket.

5.2 Электрычнае падключэнне

WARNING: Ensure power is OFF at the main circuit breaker before making any electrical connections.

1. Вызначце правады: The projector comes with a short cable. Identify the wires:
   • Карычневы провад: фаза (L)
   • Сіні провад: нейтральны (N)
   • Yellow/Green wire: Earth (Ground)
2. Падключыце да крыніцы харчавання: Connect the projector's wires to your main power supply wires according to standard electrical codes (Live to Live, Neutral to Neutral, Earth to Earth). Use appropriate waterproof junction boxes and connectors for outdoor installations to maintain IP65 integrity.
3. Ізалюйце злучэнні: Ensure all connections are properly insulated.

5.3 Рэгуляванне вугла

The mounting bracket allows for a 180° adjustment. Once installed, loosen the screws on the side of the bracket, adjust the light to your desired angle, and then tighten the screws securely to fix its position.

6. Інструкцыя па эксплуатацыі

Once properly installed and connected to the power supply, the Aigostar LED Projector will illuminate when power is supplied. There are no external controls on the unit itself. Operation is typically controlled via the wall switch or external timer/sensor connected to the power circuit.

7. Тэхнічнае абслугоўванне

The Aigostar LED Projector requires minimal maintenance due to its durable design and long-lasting LEDs.

• Уборка: Periodically clean the surface of the light fixture with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
• Агляд: Regularly check the mounting hardware and electrical connections for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components immediately.
• No User-Serviceable Parts: The LED light source is integrated and not replaceable by the user. Do not attempt to open the fixture.

8. Выпраўленне непаладак

If you encounter issues with your LED Projector, refer to the following common problems and solutions:

9. Карыстальніцкія парады

• For optimal outdoor illumination, consider mounting the floodlight at a height that allows its 110° beam angle to cover the desired area effectively without causing glare.
• When installing multiple units, space them evenly to achieve uniform lighting across larger spaces like patios or parking lots.
• Regularly clean the glass surface to maintain maximum light output, especially in dusty or high-pollen environments.

10. Гарантыя і падтрымка

AIGOSTAR products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official AIGOSTAR webсайт для атрымання падрабязных гарантыйных умоў.

For technical support, troubleshooting assistance, or warranty claims, please contact AIGOSTAR customer service through their official channels.