1. Уводзіны
The ALIENTEK HP20 Hot Plate Preheater is a compact and portable digital heating tool designed for precision temperature control in various applications, including reflow soldering and mobile phone repair. Featuring PD3.1 protocol support, PID temperature control, and a maximum heating power of 200W, the HP20 offers efficient and accurate heating performance. This manual provides essential information for the safe and effective use of your HP20 device.
2. Настройка
2.1 Распакоўка і кампаненты
Carefully unpack your HP20 Hot Plate Preheater and verify that all components are present. The standard package includes:
- HP20 host (x1)
- C2C Data Cable, 140W (x1)
- Mini Shark Clip (Complimentary) (x2)
- Silicone Cover (Complimentary) (x1)
- Упаковачная скрынка (x1)
2.2 Падключэнне харчавання
The HP20 supports multiple power supply methods:
- Type-C Port (PD3.1 / PD3.0 Protocols): Compatible with 140W, 100W, 65W GaN chargers and power banks (fast charging supported).
- DC Power Adapters: Supports 20V ~ 28V DC input.
Important: Only one of the DC port or Type-C port can be used at a time. Do not use both simultaneously, as this may damage the device.
Connect your chosen power source to the appropriate port on the HP20. The device will automatically match the maximum PD output power for optimal performance.
3. Інструкцыя па эксплуатацыі
3.1 Уключэнне/выключэнне сілкавання
Once connected to a power source, the device will power on. Use the designated controls on the front panel to navigate and operate the device.
3.2 Temperature Control and Adjustable Power
The HP20 features PID temperature control for rapid and precise heating. The heating power is adjustable from 65W to 200W, allowing for fine-tuning to suit various power adapters and applications. The device supports a maximum temperature of 350°C.
The HP20 heats up quickly, reaching 260°C from room temperature in approximately 120 seconds (at 200W power). Refer to the comparison table for heating times at different power levels:
Рэжымы працы 3.3
The HP20 offers three primary operating modes:
- Нагрэў з пастаяннай тэмпературай: For stable and rapid temperature rise.
- Пайка аплаўленнем: Simulates reflow soldering with stage-by-stagэлектронны кантроль тэмпературы.
- Рамонт: Supports integration with third-party repair platforms and temperature calibration.
3.3.1 Reflow Soldering Process
The reflow soldering mode provides intelligent temperature control through distinct stages:
- Папярэдні нагрэў Stage: Gradually raises the temperature.
- Пастаянная тэмпература Stage: Maintains a stable temperature.
- Пераплаўленне Сtage: Peak temperature for solder reflow.
- Астуджэнне Stage: Controlled cooling to solidify solder joints.
3.3.2 Mobile Phone Repair Scenarios
The repair mode allows for presetting preheating temperature and heating duration for four major scenarios:
- Debonding: Motherboard / SoC Edge Adhesive Softening.
- расслаенне: Double-Layer Motherboard Uniform Temperature Separation.
- Ламінат: Large-Area Constant-Temperature Lamination.
- Solder Ball Mounting: Stable Constant Temperature, Full and Plump Solder Joints.
3.4 Bluetooth APP Connection
The HP20 supports Bluetooth connectivity, allowing for real-time data display and control via a dedicated mobile application. Pair your device with the HP20 to monitor temperature curves and adjust settings remotely.
3.5 Інтэрфейс налад меню
The HP20's menu allows you to configure various parameters, including sleep time, power output, and temperature calibration. It supports multiple languages and temperature units (Celsius/Fahrenheit) for personalized use.
3.6 Colorful Lights Temperature Indication
The HP20 features a colorful light gradient that changes to indicate the temperature as it rises, providing a visual cue for the current heating status.
4. Тэхнічнае абслугоўванне
4.1 Heat-Resistant Silicone Cover
A heat-resistant silicone cover is included to protect the heating plate and ensure safety during operation. Always place it gently on the heating surface when not in use or for protection.
4.2 Ачыстка
Ensure the device is powered off and cooled down before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
4.3 Абнаўленне прашыўкі
The HP20 supports local mode firmware upgrades. This process typically involves connecting the device to a host computer and using the ATK-HP20 UPGRADE software. Refer to the official ALIENTEK website or support documentation for the latest firmware and detailed update instructions.
5. Выпраўленне непаладак
The HP20 is equipped with comprehensive protection features to ensure safe operation. If you encounter any issues, consider the following:
- Абарона ад перагрэву: The device will automatically shut down or reduce power if it detects excessive temperatures.
- Абарона ад перагрузкі па току: Абарона ад празмернага спажывання току.
- Fan / NTC Protection: Monitors fan operation and thermistor readings for abnormal conditions.
- Input Abnormality: Detects issues with the power input. Ensure only one power source is connected at a time.
- Абарона па тайм-аўце: Prevents prolonged heating beyond set limits.
- Reflow Soldering Process Full-Link Protection: Ensures the reflow process adheres to safe parameters.
If the device displays an error message or behaves unexpectedly, power it off, disconnect the power source, wait a few minutes, and then reconnect. If the issue persists, consult the ALIENTEK support resources.
6. Тэхнічныя характарыстыкі
Below are the detailed specifications for the ALIENTEK HP20 Hot Plate Preheater:
| Асаблівасць | Дэталь |
|---|---|
| Назва прадукту | HP20 heating plate |
| Мадэль прадукту | ATK-PTHP20 |
| Памер (Д × Ш × У) | 104 мм × 64 мм × 50.6 мм |
| Вага прадукту | ≥260г |
| Рабочы выпtage | DC 20V~28V / Type-C (Max 28V) |
| Heating Power (Adjustable) | 65 Вт ~ 200 Вт |
| Дыяпазон тэмператур | 40°C~350°C |
| ўваходных інтэрфейс | DC5521 / Type-C |
| Пратакол хуткай зарадкі | PD3.1 / PD3.0 / PD2.0 |
| Экран | 1.47 inches IPS LCD, 320×172 (Resolution) |
| Атэстацыя | CE, FCC |
| Даўжыня ўпакоўкі | 25 см |
| Шырыня ўпакоўкі | 16 см |
| Вышыня пакета | 8 см |
| Вага ўпакоўкі | 0.5 кг |
7. Карыстальніцкія парады
У прадстаўленай інфармацыі не было ніякіх канкрэтных парад карыстальнікамviews or Q&A content. Always ensure to follow the safety guidelines and operating instructions for optimal performance and longevity of your device.
8. Гарантыя і падтрымка
For warranty information, technical support, or service inquiries, please refer to the official ALIENTEK webсайт або звярніцеся да прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі для любых гарантыйных прэтэнзій.