KEBIDUMEI Open Ear Bluetooth Headphones

Уводзіны

Thank you for choosing the KEBIDUMEI D88 Open Ear Bluetooth Headphones. These wireless ear hook earphones are designed to provide a comfortable listening experience with advanced features such as Bluetooth 5.3 connectivity, noise reduction, and IPX4 waterproofing. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Змест пакета

• KEBIDUMEI D88 Open Ear Bluetooth Headphones (Left and Right)
• Чахол для зарадкі
• Зарадны кабель
• Кіраўніцтва карыстальніка

Тэхнічныя характарыстыкі

Настройка і спалучэнне

Automatic Pairing (Dual Headphones - First Use)

1. Place both headphones back into the charging case. Ensure the red light illuminates, indicating they are charging. If not, use the USB charging cable to charge the case and headphones simultaneously.
2. Remove both headphones from the charging case. They will automatically power on with a blue flashing light and a "Power on" prompt.
3. After 7-10 seconds, the headphones will pair with each other. You will hear "Left channel" from the left earbud and "Right channel" from the right earbud, confirming successful pairing.
4. The main earbud will flash red and blue, while the secondary earbud will show a steady blue light.
5. Open the Bluetooth settings on your mobile device, search for "D88", and tap to connect. You will hear "Connected successfully" upon successful connection.
6. Once connected, the headphones will automatically connect to your device within seconds every time you remove them from the charging case.

Manual Pairing (Dual Headphones - If Automatic Pairing Fails)

1. With both headphones off, long-press the main control key on each earbud for 3 seconds. Both earbuds will show a slow blue flash and a "Power on" prompt, entering pairing mode.
2. After 7-10 seconds, the earbuds will pair with each other, announcing "Left channel" and "Right channel". The main earbud will then flash red and blue, indicating it's ready to pair with a device.
3. Open your phone's Bluetooth settings, find "D88", and tap to connect. A "Connected successfully" prompt will confirm the connection.
4. If the headphones have been previously connected to your device, they will automatically reconnect upon powering on.

Рэжым аднаго вуха

To use a single earbud:

1. Remove either earbud from the charging case. It will power on and announce "Power on", then "Matching", automatically entering search pairing state.
2. On your mobile device's Bluetooth settings, search for "D88" and connect. You will hear "Connected successfully".
3. Ensure the other earbud is placed back in the charging case to enter charging and shutdown state.

Аперацыя

• Уключэнне: Remove the headphones from the charging case to automatically power them on. If they do not power on automatically, long-press either earbud for approximately 3 seconds.
• Выключэнне: Long-press either earbud for approximately 5 seconds until you hear a "Off" sound, or place them back into the charging case.
• Прайграванне/Паўза: During music playback, single-tap either the left (L) or right (R) earbud to play or pause.
• Адказаць на званок/пакласці трубку: During an incoming call, single-tap either earbud to answer or end the call.
• Адхіліць выклік: During an incoming call, double-tap either earbud to reject the call.
• Activate/Deactivate Voice Assistant (e.g., Siri): While in use or standby, long-press the left or right earbud until you hear a "Beep" sound, then release to wake up the voice assistant. To deactivate, long-press for 1.5 seconds.

Тэхнічнае абслугоўванне і зарадка

Зарадка навушнікаў

• Place the earphones into the charging case. Ensure the charging contacts align and connect.
• During charging, the earphones will display a red light.
• The indicator lights on both the earphones and the charging case will turn off once the earphones are fully charged.

Зарадка зараднага кейса

• Use a standard 5V charger to charge the charging case.
• The indicator light on the charging case will flash red during charging.
• When the charging case is fully charged, the blue light will remain steadily on.

Checking Charging Case Capacity

Simply open the transparent protective cover of the earbud slot on the charging case. The digital display will light up, showing the current battery percentage.

Агульны догляд

• Заўсёды выконвайце інструкцыі ў гэтай інструкцыі.
• Не выкарыстоўвайце зарадная прылада, якая перавышае намінальны ток і аб'ёмtage (5V 1A) for the earphones, as this may damage the battery.
• Выкарыстоўвайце і захоўвайце прадукт пры пакаёвай тэмпературы.
• Avoid using the product near heat sources such as heaters, hot air conditioners, stoves, or other heat-generating equipment.
• Do not block any openings on the headphones, including charging ports, indicator lights, and microphones.

Ліквідацыю непаладак

If you encounter issues with your KEBIDUMEI D88 headphones, consider the following:

• Навушнікі не зараджаюцца: Ensure the headphones are correctly seated in the charging case and the red indicator light is on. Verify the charging case itself has power or is connected to a 5V charger.
• Automatic pairing fails: Try the manual pairing method described in the "Setup and Pairing" section.
• Cannot connect to device: Ensure Bluetooth is enabled on your device and the headphones are in pairing mode. Forget "D88" from your device's Bluetooth list and try pairing again.
• Праблемы з гукам: Check the volume on both your device and the headphones. Ensure no openings are blocked.

Парады карыстальніка

• For optimal sound quality and comfort, ensure the ear hooks are securely positioned over your ears.
• Regularly clean the charging contacts on both the earbuds and the case to ensure efficient charging.
• Keep the charging case lid closed when not in use to protect the earbuds and conserve battery.

Інфармацыя па бяспецы

WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.

General Safety Advisory

This product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Асноўныя меры засцярогі:

• Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
• Выкарыстоўвайце сродкі індывідуальнай абароны (СІЗ): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
• Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
• Будзьце ўважлівыя: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required:

• СТОП if you are uncertain about the safety of any action.
• КОНСУЛЬТ the relevant official safety manuals or qualified personnel for guidance.
• НЕ ПРАЦЯГВАЙЦЕ without proper authorization and training for hazardous tasks.

Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

Сертыфікат CE

This symbol indicates that this product conforms with all applicable European Union regulations. "Conformité Européenne" (CE) confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.