Уводзіны
This manual provides instructions for the FMS 3-in-1 Mini Brushless System Combo Set (C3891) and the accompanying Pinion Gear (C3684). The C3891 combo integrates a Receiver (RX), Electronic Speed Controller (ESC), and Brushless Motor into a compact unit, designed for use with specific RC vehicles such as the FCX24 K5 Black Brushless and FCX24 Power Wagon Brushless. The C3684 Pinion Gear is compatible with 1212 3200KV brushless motors.
Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your product.
Інфармацыя па бяспецы
⚠ WARNING: California Proposition 65
Гэты прадукт можа ўтрымліваць у вас хімічныя рэчывы, у тым ліку фталаты (DEHP), якія, як вядома ў штаце Каліфорнія, выклікаюць рак і прыроджаныя дэфекты або іншыя парушэнні рэпрадуктыўнай сістэмы. Для атрымання дадатковай інфармацыі перайдзіце па спасылцы www.P65Warnings.ca.gov.
- Always ensure proper ventilation when operating electronic components.
- Keep away from water and moisture to prevent damage to electronic parts.
- Перад уключэннем сістэмы пераканайцеся, што ўсе злучэнні надзейныя.
- Recommended for ages 14 and up. Adult supervision is advised for younger users.
Змест пакета
Праверце, ці ёсць усе прадметы ў вашай упакоўцы:
- 1x FMS 3-in-1 Mini Brushless System Combo Set (RX/ESC/Motor) - Model C3891
- 1x Pinion Gear - Model C3684
- (Optional, depending on purchase) Remote Control Transmitter
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Тып прадукту | 3-in-1 Mini Brushless System Combo Set (RX/ESC/Motor) and Pinion Gear |
| Model Number (Combo) | C3891 (FS-RCABL-ESC-BS) |
| Model Number (Pinion Gear) | C3684 |
| Тып рухавіка | Brushless 1212 3200KV (integrated in C3891) |
| ESC Lipo Compatibility | 2-3S LiPo |
| Выхад BEC | 5 В/1 А |
| Матэрыял | Plastic (housing), Metal (motor/gear components) |
| Рэкамендаваны ўзрост | 14+ гадоў |
| Ужыванне | RC Cars (specifically FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless) |
| Паходжанне | Кантынентальны Кітай |
Інструкцыя па наладзе
Follow these steps to install the FMS 3-in-1 Mini Brushless System Combo Set and Pinion Gear into your compatible RC vehicle.
- Падрыхтуйце аўтамабіль: Ensure your RC vehicle (e.g., FCX24 K5 Black Brushless, FCX24 Power Wagon Brushless) is powered off and the battery is disconnected. Remove the existing motor and ESC/receiver unit if applicable.
- Install the Pinion Gear (C3684):
The C3684 Pinion Gear, designed for the 1212 3200KV brushless motor. Carefully attach the C3684 pinion gear to the shaft of the 1212 3200KV brushless motor (which is part of the C3891 combo). Ensure it is properly aligned with the vehicle's main gear and secured with the grub screw.
- Mount the C3891 Combo Unit:
Падрабязны view of the FMS FS-RCABL-ESC-BS (C3891) unit, showing ports and specifications. Securely mount the C3891 unit within your vehicle's chassis. Ensure it is protected from vibrations and potential impacts. The motor is integrated, so position the unit such that the motor can connect to the drivetrain.
- Падключэнне да сілкавання: Connect your 2-3S LiPo battery to the power input of the C3891 ESC. Ensure correct polarity.
- Bind with Transmitter:
- Уключыце перадатчык.
- Power on the RC vehicle.
- Follow your transmitter's specific binding procedure. The C3891 unit (FS-RCABL-ESC-BS) will enter binding mode, indicated by a flashing LED.
- Once bound, the LED on the C3891 unit should become solid.
- Тэставы кантроль: Before full operation, test the steering and throttle responses to ensure they are functioning correctly and in the right direction. Adjust transmitter settings if necessary.
Інструкцыя па эксплуатацыі
Once the system is installed and bound, you can begin operating your RC vehicle.
- Уключэнне: Turn on your remote control transmitter first, then connect the battery to your RC vehicle.
- Ваджэнне: Use the throttle trigger/stick on your transmitter to control forward and reverse movement, and the steering wheel/stick for direction.
- Выключэнне: Always disconnect the battery from the RC vehicle first, then turn off your remote control transmitter. This prevents accidental runaway.
Тэхнічнае абслугоўванне
- Уборка: Regularly clean the motor and ESC/receiver unit to remove dirt, dust, and debris. Use a soft brush or compressed air. Avoid using liquids directly on electronic components.
- Інспекцыі: Periodically check all wiring and connections for signs of wear, damage, or looseness. Ensure the pinion gear is securely attached and free of excessive wear.
- захоўванне: When not in use, store the RC vehicle and its components in a dry, cool place away from direct sunlight. Disconnect the battery for long-term storage.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| No power to vehicle | Battery not connected, discharged battery, faulty wiring. | Check battery connection, charge battery, inspect wiring for damage. |
| Рухавік не рэагуе | Not bound to transmitter, motor wires loose, ESC error. | Re-bind transmitter, check motor connections, power cycle the ESC. |
| Erratic control/loss of signal | Interference, loose antenna, low transmitter battery. | Move to an area with less interference, check receiver antenna, replace transmitter batteries. |
| Перагрэў матора | Incorrect gearing, excessive load, prolonged use. | Check pinion/spur gear ratio, reduce load, allow motor to cool down. |
Гарантыя і падтрымка
For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.
Refer to the official FMS website or your product's specific documentation for detailed warranty terms and conditions.