FLYLINKTECH BD10

FLYLINKTECH Car Battery Jump Starter BD10

Кіраўніцтва карыстальніка

Уводзіны

Thank you for choosing the FLYLINKTECH BD10 Car Battery Jump Starter. This powerful and versatile device is designed to provide reliable jump-starting for a wide range of vehicles and serve as a portable power bank for your electronic devices. With an 8000A peak current and 26800mAh capacity, it ensures you're never stranded with a dead battery. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your jump starter.

FLYLINKTECH BD10 Jump Starter with clamps and carrying case
FLYLINKTECH BD10 Jump Starter, smart jumper cables, and portable EVA carrying case.

Прадукт скончаныview

The FLYLINKTECH BD10 is equipped with advanced features for optimal performance and safety:

  • Powerful Jump Starting: 8000A peak current and 26800mAh capacity, capable of starting all gas engines and diesel engines up to 12.0L. Features a 'BOOST' button for completely depleted batteries.
  • Multifunctional Power Bank: Includes PD65W USB-C (input/output), dual USB-A Quick Charging 3.0 outputs (5V/3A, 9V/2A, 12V/1.5A), and a DC output (15V/10A) for charging phones, tablets, air compressors, and other devices.
  • Smart Secure Protection: Upgraded smart jumper clamps offer 10 safety protections, ensuring safe operation even in extreme temperatures (-4°F to 140°F). IP65 waterproof rating allows for safe use in rainy conditions.
  • Інтэлектуальны святлодыёдны дысплей: A visibly clear 6-inch LED screen shows real-time operation status, battery level, and potential error warnings with corresponding numbers for easy troubleshooting.
  • Звышяркі святлодыёд: Built-in 600 lumens LED light with three modes: Flashlight, Strobe, and SOS. Long press the button to switch between modes, ideal for emergencies and outdoor activities.

Тэхнічныя характарыстыкі

Асаблівасць Спецыфікацыя
мадэль BD10
Памеры прадукту (Д х Ш х У) 3.93 х 2.26 х 9.25 цалі
Вага прадмета 920 грам
Пікавы ток 8000 Amps
Ёмістасць батарэі 26800 мАг
Склад батарэі Літый-іённы
тtage 12 вольт
Тып абслугоўвання аўтамабіля All Gas Engines, Diesel Engines up to 12.0L (Lawn Mower, Motorcycle, Passenger Car, Scooter, Snowmobile, Truck, Van)
Каэфіцыент канверсіі 85%~90%
Колькасць убудаваных батарэй >6
Charging Input/Output PD65W USB-C (In & Out)
Выхады USB-A Dual Quick Charge 3.0 (5V/3A, 9V/2A, 12V/1.5A)
Выхад пастаяннага току 15 В/10 А
Працоўная тэмпература Ад -4°F да 140°F (ад -20°C да 60°C)
Рэйтынг воданепранікальнасці IP65
Святлодыёдны выхад 600 люмен

Настройка

1. Пачатковая аплата

Before first use, fully charge the jump starter. Connect the included USB-C cable to the jump starter's USB-C port and to a compatible USB wall charger (65W wall charger not included). The 6-inch LED display will show the charging progress. A full charge from 0% can take as little as 1.5 hours with a 65W charger.

Table showing charging times for the jump starter
Charging time estimates for the jump starter. Note: 65W wall charger is not included.

2. Праверце ўзровень зарада батарэі

Always check the jump starter's battery level on the 6-inch LED display before use. Ensure it has sufficient charge to start your vehicle or power your devices.

Close-up of the 6-inch LED display screen
The 6-inch LED display shows battery level, operational status, and error codes.

Інструкцыя па эксплуатацыі

1. Запуск аўтамабіля ад дажджу

  1. Ensure the jump starter is adequately charged (at least 50% recommended).
  2. Выключыце запальванне аўтамабіля і ўсё аксэсуары.
  3. Злучыць чырвоны (+) склamp of the smart jumper cables to the positive (+) terminal of your vehicle's battery.
  4. Злучыць чорны (-) склamp of the smart jumper cables to the negative (-) terminal of your vehicle's battery.
  5. Plug the smart jumper cable connector into the jump starter's port. The LED display will show 'READY' or similar indication.
  6. If the vehicle battery is completely depleted, press the 'BOOST' button on the jump starter.
  7. Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
  8. Once the vehicle starts, immediately disconnect the smart jumper cable from the jump starter, then remove the black (-) clamp, а затым чырвоны (+) clamp ад акумулятара аўтамабіля.
Jump starter connected to a car battery in an engine bay
The BD10 jump starter is capable of starting various vehicles, including those with up to 12.0L diesel engines.

2. Выкарыстанне ў якасці партатыўнага паўэрбанка

The BD10 can charge multiple electronic devices:

  • Выхад USB-C: Use the PD65W USB-C port to fast charge compatible devices like laptops, tablets, and smartphones.
  • Выхады USB-A: Use the dual Quick Charging 3.0 USB-A ports (18W max each) to charge smartphones, tablets, and other USB-powered devices.
  • Выход пастаяннага току: The 15V/10A DC output can power 12V accessories like air compressors or car vacuums using the included DC cigarette lighter adapter.
Jump starter charging multiple devices like phones and tablets
The 26800mAh capacity allows for charging multiple devices simultaneously.

3. Аварыйная святлодыёдная лямпа

The built-in 600 lumens LED light has three modes:

  • Ліхтарык: Для агульнага асвятлення.
  • Строб: Для сігналізацыі або прыцягнення ўвагі.
  • СОУС: Для аварыйнай сігналізацыі.

To activate the light, press the light button. Long press the button to cycle through the different modes.

Close-up of the emergency LED flashlight with Flashlight, SOS, Strobe modes
The 600 lumens LED light provides Flashlight, Strobe, and SOS modes for various situations.

Тэхніка бяспекі

  • Перад выкарыстаннем уважліва прачытайце ўсе інструкцыі.
  • Do not immerse the unit in water. The IP65 rating protects against splashes, but not submersion.
  • Не запускайце замерзлую батарэю.
  • Не злучайце дадатныя і адмоўныя склampразам.
  • Do not attempt to jump start vehicles that exceed the specified engine displacement limits.
  • Захоўваць у месцах, недаступных дзецям.
  • Store in a cool, dry place away from direct sunlight and high temperatures.
  • If the jump starter becomes excessively hot during use, disconnect it immediately and allow it to cool down.
  • Разумны скакун клamps provide 10 safety protections, including reverse polarity, over-current, short-circuit, over-charge, and over-temperature protection. Pay attention to warning icons on the LED display.

Тэхнічнае абслугоўванне і захоўванне

  • Recharge the jump starter every 3-6 months, even if not used, to maintain battery health.
  • Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
  • Store the jump starter and accessories in the provided portable EVA carrying case to protect them from damage.
  • Avoid storing the unit in extreme temperatures (above 140°F or below -4°F) for extended periods.

Ліквідацыю непаладак

  • Аўтамабіль не заводзіцца:
    • Check if the jump starter has sufficient charge.
    • Пераканайцеся, што клamps are securely connected to the correct battery terminals (red to positive, black to negative).
    • If the battery is completely dead, use the 'BOOST' function.
    • Check for error messages on the LED display and refer to the corresponding warnings.
  • Пускавая прылада не зараджаецца:
    • Ensure the USB-C cable and wall charger are working correctly.
    • Verify the USB-C cable is fully inserted into the jump starter's port.
  • Не працуе святлодыёдны падсвет:
    • Ensure the jump starter has power.
    • Press the light button firmly. Long press to cycle modes.

The intelligent LED screen will display warning icons and numbers in case of misuse, helping you to identify and correct issues promptly.

Парады карыстальніка

  • For optimal performance, try to keep the jump starter charged above 50% when not in use, especially if you anticipate needing it for an emergency.
  • Always store the jump starter in an easily accessible location in your vehicle, such as the glove compartment or trunk, so it's ready when you need it.
  • When using the power bank feature, ensure your devices are compatible with the output voltages and currents to prevent damage.

Гарантыя і падтрымка

Your FLYLINKTECH BD10 jump starter comes with a 2-YEAR FREE Warranty. For any questions, technical assistance, or warranty claims, please contact our customer service. We offer 7/24 Customer Service and Lifetime Technical Support to ensure your satisfaction.

© 2025 FLYLINKTECH. All rights reserved.

Звязаныя дакументы - BD10

прэview FLYLINKTECH BD10 Jump Starter Power Bank User Manual
Comprehensive user manual for the FLYLINKTECH BD10 Jump Starter Power Bank, detailing its features, operation, and safety guidelines. Learn how to use it as a jump starter, power bank, and LED flashlight.
прэview Кіраўніцтва карыстальніка FLYLinktech BD10 Jump Starter Power Bank
Comprehensive user manual for the FLYLinktech BD10 Jump Starter Power Bank. Learn about its features, operation, safety, specifications, troubleshooting, and compliance.
прэview FLYLINKTECH BD10 Jump Starter Power Bank User Manual
Comprehensive user manual for the FLYLINKTECH BD10 Jump Starter Power Bank, covering product layout, operation guidance, charging instructions, jump-starting a vehicle, specifications, warnings, maintenance, FAQ, and compliance information.
прэview Acetek Jump Starter User Manual: Operation and Features
Comprehensive guide to using the Acetek 2500A Peak Jump Starter, including jump-starting vehicles, charging devices, LED light functions, display indicators, and safety precautions.
прэview Кіраўніцтва па эксплуатацыі маланкавага стартара TOPDON V2200
Падрабязнае кіраўніцтва карыстальніка для партатыўнага пускавога прывада TOPDON V2200. Даведайцеся пра яго функцыі, меры бяспекі, як зараджаць і запускаць аўтамабіль з напругай 12 В.
прэview YUSMAN F03 Car Jump Starter with 150 PSI Air Compressor - User Manual
Comprehensive user manual for the YUSMAN F03 car jump starter and 150 PSI air compressor. Learn how to jump start your car, inflate tires, charge devices, and understand safety precautions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.