1. Уводзіны
Thank you for choosing the Jebao RW Series Wavemaker. This device is designed to create natural wave patterns in your marine, reef, or freshwater aquarium, promoting a healthy environment for your aquatic life. The smart controller allows for precise adjustment of flow rates and various wave modes. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your wavemaker.
2. Інфармацыя па бяспецы
- Заўсёды адключайце электраэнергію перад любым тэхнічным абслугоўваннем або ўстаноўкай.
- Гэта прылада прызначана толькі для выкарыстання ў памяшканні.
- Do not operate the pump dry. Ensure it is fully submerged in water.
- Keep the power adapter and controller away from water to prevent electric shock.
- Пераканайцеся, што шнур харчавання не пашкоджаны і не пераціснуты.
- The wavemaker is suitable for glass thickness up to 15mm. Do not exceed this limit.
- The maximum operating temperature for the wavemaker is 35°C.
3. Змесціва ўпакоўкі
Праверце, ці ёсць усе прадметы ў вашай упакоўцы:
- 1x Jebao RW Series Propeller Pump (RW4, RW8, RW15, or RW20, depending on model purchased)
- 1x Smart Controller (W-10/20)
- 1x Power Adapter (AC100-240V)
- 1x двухбаковая клейкая стужка
- 1x Кіраўніцтва карыстальніка
4. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Матэрыял | Метал |
| Фіксаваная форма | Седзячы |
| Крыніца харчавання | Зарадзіць |
| тtage | 110-240В |
| Паходжанне | Кантынентальны Кітай |
| Ужыванне | Fish Tank, Marine, Coral Reef |
| Воданепранікальны клас | IPX8 Marine Wavemaker |
| Максімальная тэмпература | 35°C |
| Magnet Mount Thickness | Да 15 мм |
Model-Specific Specifications:
| мадэль | Выкарыстанне энергіі | Хуткасць патоку | Памеры (прыбл.) |
|---|---|---|---|
| RW4 | 10-20W | 500-4000 л/г | 75mm Length |
| RW8 | 8-23W | 700-8000 л/г | 95mm Length |
| RW15 | 40 Вт | 13000 л/г (2860 GPH) | 13cm Length x 9.2cm Diameter |
| RW20 | 60 Вт | 20000 л/г (4400 GPH) | 13cm Length x 10cm Diameter |
5. Інструкцыі па ўсталёўцы
5.1 Mounting the Wavemaker Pump
- Ensure your aquarium glass thickness does not exceed 15mm for secure magnetic mounting.
- Place the wavemaker pump inside the aquarium, ensuring it is fully submerged.
- Align the external magnet on the outside of the aquarium glass directly opposite the internal pump. The strong magnets will hold the pump in place.
- Adjust the position and angle of the pump as desired to achieve optimal water flow.
5.2 Connecting the Controller and Power
- Connect the wavemaker pump cable to the 'PUMP' port on the smart controller.
- Connect the power adapter to the 'POWER' port on the smart controller.
- Падключыце адаптар сілкавання да адпаведнай электрычнай разеткі (110-240 В).
- The controller will power on, and the pump will begin operation according to the default settings.
6. Інструкцыя па эксплуатацыі
The smart controller (W-10/20) allows you to customize the wavemaker's performance. Refer to the controller image for button and indicator locations.
6.1 Adjusting Flow Rate (Speed)
Use the rotary knob labeled 'Fast' to 'Slow' to adjust the pump's speed and thus the water flow rate. Turn clockwise for faster flow, counter-clockwise for slower flow. The 'Speed' indicator lights will show the current setting.
Рэжымы працы 6.2
Press the 'MODE' button to cycle through different wave patterns:
- W1 (Wave Mode 1): Creates a regular wave pattern.
- W2 (Wave Mode 2): Creates a more irregular wave pattern.
- Else (Random Mode): Generates a random flow pattern, simulating natural ocean currents.
- H (Constant Flow Mode): Provides a steady, continuous flow.
- C (Alternating Flow Mode): The pump alternates between high and low flow rates.
6.3 Feed Mode
Press the 'SPEED FEED' button once to activate Feed Mode. The pump will slow down for a period of 10 minutes, allowing fish to feed without being disturbed by strong currents. The '10min' indicator will light up. After 10 minutes, the pump will automatically resume its previous operating mode.
6.4 Night Sensor
The controller features a 'Light Sensor' that automatically detects when tank lights go out. In low light conditions, the pump will automatically slow down to a gentler flow, simulating nighttime conditions in the ocean. This helps reduce stress on nocturnal inhabitants.
6.5 Wireless Control (Master/Slave)
If you have multiple Jebao RW wavemakers, you can set them up for wireless synchronization:
- Master Pump: Set one controller as the 'Master Slave' by pressing and holding the 'WI-LOCK' button until the 'Master Slave' indicator lights up. This controller will dictate the mode and speed for all linked pumps.
- Slave Pumps: For other pumps, ensure their controllers are not set to 'Master Slave'. They will automatically synchronize with the master controller.
- Функцыя блакавання: Press the 'WI-LOCK' button briefly to lock the current settings, preventing accidental changes.
For a visual guide on setup and operation, you may refer to the Jebao RW4 introduction video on YouTube: https://www.youtube.com/watch?v=COuLKLJJeqM
7. Тэхнічнае абслугоўванне
Regular maintenance ensures optimal performance and extends the lifespan of your wavemaker.
- Ачыстка помпы: Disconnect power. Remove the pump from the aquarium. Disassemble the pump head and impeller. Clean any algae, debris, or calcium buildup using a soft brush and warm water. For stubborn calcium deposits, a mild vinegar solution can be used, followed by thorough rinsing.
- Ceramic Shaft: The ceramic shaft is designed for long life and durability. Inspect it during cleaning for any signs of wear or damage.
- Сыход за кантролерам: Keep the controller dry and clean. Wipe with a dry cloth if necessary. Do not immerse in water.
- Праверка кабеля: Periodically check all cables for any signs of fraying, cuts, or damage. Replace immediately if damage is found.
8. Выпраўленне непаладак
- Помпа не ўключаецца:
- Check if the power adapter is securely plugged into both the controller and the wall outlet.
- Ensure the pump cable is firmly connected to the controller.
- Пераканайцеся, што разетка працуе.
- Weak or inconsistent flow:
- Clean the pump impeller and housing. Debris or algae buildup can restrict flow.
- Adjust the flow rate using the rotary knob on the controller.
- Check for any blockages in the pump's intake or output.
- Празмерны шум:
- Ensure the pump is fully submerged and not operating dry.
- Clean the impeller and ceramic shaft for any foreign objects or buildup.
- Check if the pump is securely mounted and not vibrating against the glass.
- Кантролер не адказвае:
- Disconnect and reconnect the power to reset the controller.
- Пераканайцеся, што ўсе злучэнні надзейныя.
9. Карыстальніцкія парады
- Aquarium Size Matching: For larger aquariums, especially those around 450 liters (approximately 120 gallons), consider using an RW15 or RW20 model for adequate flow. For smaller tanks (e.g., 68 gallons), two RW4 units might be sufficient, but a single RW8 could also work depending on desired flow.
- Controller per Pump: Each Jebao RW wavemaker pump requires its own dedicated controller. You cannot connect multiple pumps to a single controller.
- Таўшчыня шкла: The magnetic mount is designed for glass up to 15mm thick. Exceeding this thickness may result in an insecure mount and potential pump detachment.
- Размяшчэнне: Experiment with different pump placements and angles in your aquarium to achieve the most natural and beneficial wave patterns for your specific tank inhabitants.
10. Гарантыя і падтрымка
Jebao products are manufactured with quality and reliability in mind. For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.
Кантактная інфармацыя вытворцы:
- Company: Jebao (Zhongshan) Electrical Appliance Co.Ltd
- Address: Tongmao Industrial Park, Dongsheng Town, Zhongshan city, Guangdong Pro, China
- Tel: +86-760-28136717/20/21
- Факс: +86-760-28136725
- E-Mail: info@jebao.com
- Website: www.jebao.com
