Yamaha RK1

Yamaha RK1 Rack Mount Kit Instruction Manual

Прадукт скончаныview

The Yamaha RK1 Rack Mount Kit is designed to securely install compatible Yamaha mixers into a standard 19-inch equipment rack. This kit provides the necessary hardware to integrate your mixer seamlessly into a professional studio or live sound setup, ensuring stability and accessibility.

Важная заўвага: This product includes only the rack mount kit and its associated hardware. The mixer itself is sold separately and is not included with this kit.

Yamaha RK1 Rack Mount Kit components

Image: The Yamaha RK1 Rack Mount Kit, showing the two metal brackets and mounting screws.

Змест пакета

Сумяшчальнасць

The RK1 Rack Mount Kit is specifically designed for use with the Yamaha O1V96 series mixers (all versions, including O1V96i). It has also been confirmed to fit the older Yamaha MX12/4 mixer.

Заўвага: Гэты камплект не сумяшчальны with the Yamaha Promix 01 mixer. Please verify your mixer model before attempting installation to ensure proper fitment.

Інструкцыя па ўстаноўцы

Follow these steps to properly install your Yamaha mixer using the RK1 Rack Mount Kit:

  1. Prepare the Mixer: Ensure your Yamaha mixer is powered off and disconnected from all cables. Place it on a stable, flat surface.
  2. Вызначце кропкі мацавання: Locate the screw holes on the sides of your mixer chassis, typically near the front panel. These are where the RK1 brackets will attach.
  3. Далучыць дужкі: Align one RK1 bracket with the mounting holes on one side of the mixer. Use the smaller screws provided in the kit to securely fasten the bracket to the mixer. Do not overtighten. Repeat this process for the second bracket on the opposite side of the mixer.
  4. Падрыхтуйце стойку: Identify the desired location within your 19-inch equipment rack. Ensure there is adequate space and ventilation.
  5. Усталюйце змяшальнік: Carefully lift the mixer (with attached brackets) and align the holes on the RK1 brackets with the corresponding screw holes on the rack rails.
  6. Secure to Rack: Use the larger rack screws provided in the kit to firmly attach the mixer to the equipment rack. Tighten all screws evenly to ensure a secure and stable installation.
  7. Канчатковая праверка: Verify that the mixer is securely mounted and does not wobble. Reconnect all necessary cables and power on your mixer.

Догляд і абслугоўванне

The Yamaha RK1 Rack Mount Kit requires minimal maintenance. To ensure its longevity and appearance:

Ліквідацыю непаладак

Problem: The RK1 kit does not align with my mixer's mounting holes.

рашэнне: Звярніцеся да Сумяшчальнасць section of this manual. The RK1 is designed for specific Yamaha mixer models, primarily the O1V96 series. If your mixer is not listed as compatible, the kit may not fit. Do not attempt to force the installation, as this could damage your mixer or the rack kit.

Problem: The mixer feels unstable after installation.

рашэнне: Ensure all screws attaching the brackets to the mixer and the mixer to the rack are securely tightened. Over time, screws can loosen due to vibrations. Re-tighten them as necessary. If the issue persists, inspect the rack rails for damage or misalignment.

Тэхнічныя характарыстыкі

СпецыфікацыяКаштоўнасць
Нумар мадэліRK1
Вага прадмета5.6 унцыі (прыблізна 159 грамаў)
Памеры прадукту5.25 х 1.5 х 3 цалі (13.34 х 3.81 х 7.62 см)
МатэрыялМетал
Rack Size CompatibilityСтандартная 19-цалевая стойка для абсталявання

Падтрымка і гарантыя

For technical assistance, warranty information, or service inquiries regarding your Yamaha RK1 Rack Mount Kit, please contact Yamaha customer support directly. Refer to the official Yamaha website or your product packaging for the most current contact details and warranty terms applicable to your region.

You can typically find support information on the official Yamaha Musical Instruments webсайт: www.yamaha.com

Звязаныя дакументы - RK1

прэview Кіраўніцтва карыстальніка лічбавай мікшэрнай студыі Yamaha 01X
Даведайцеся пра магчымасці лічбавай мікшарнай студыі Yamaha 01X з дапамогай гэтага падрабязнага кіраўніцтва карыстальніка. Даведайцеся пра яе функцыі, такія як 28-канальны лічбавы мікшар, 24-бітны аўдыёінтэрфейс і панэль кіравання DAW, палепшаныя падключэннем mLAN і праграмным забеспячэннем для прафесійнай музычнай прадукцыі.
прэview Кіраўніцтва карыстальніка для электроннай барабаннай стойкі Yamaha RS6
У гэтым кіраўніцтве змяшчаюцца інструкцыі па зборцы, меры засцярогі і характарыстыкі электроннай стойкі для барабанаў Yamaha RS6.
прэview Драйвер Yamaha Steinberg USB версіі 2.0.4 для Mac. Заўвагі да выпуску.
Заўвагі да выпуску з падрабязным апісаннем сістэмных патрабаванняў і версій драйвера Yamaha Steinberg USB V2.0.4 для Mac, уключаючы абнаўленні з V1.0.0 да V2.0.4, інфармацыю аб сумяшчальнасці і выпраўленні памылак.
прэview Кіраўніцтва па зборцы і эксплуатацыі стойкі для хай-хэта Yamaha серыі HS1200
Гэта кіраўніцтва змяшчае падрабязныя інструкцыі па зборцы, рэгуляванні і эксплуатацыі стоек для хай-хэта Yamaha HS1200, HS1200T і HS1200D. Даведайцеся, як наладзіць вал хай-хэта, апорную пласціну талеркі, счапленне, кламмер памяці.amp, нацяжэнне спружын, шыпы, становішча ног і кут нахілу падножкі для аптымальнай прадукцыйнасці.
прэview Сумяшчальнасць прадуктаў Yamaha з аперацыйнымі сістэмамі macOS і Windows
У гэтым дакуменце змяшчаецца інфармацыя аб сумяшчальнасці прадуктаў Yamaha з рознымі аперацыйнымі сістэмамі macOS і Windows, у тым ліку macOS Sonoma, Ventura, Monterey, Big Sur, Catalina, Windows 11 і Windows 10. У ім падрабязна апісваецца стан падтрымкі праграмнага забеспячэння, драйвераў і прашыўкі на камп'ютарах Mac з працэсарамі Intel і Apple.
прэview AV-рэсіверы Yamaha: падтрымка функцый HDMI ALLM і VRR
Даведайцеся пра падтрымку HDMI ALLM (аўтаматычны рэжым нізкай затрымкі) і VRR (зменная частата абнаўлення) на асобных AV-рэсіверах Yamaha, у тым ліку на мадэлях RX-A8A, RX-A6A, RX-A4A, RX-A2A, RX-V6A, RX-V4A, TSR-700 і TSR-400. Палепшыце свае гульнявыя магчымасці і viewдосвед працы з гэтымі перадавымі відэатэхналогіямі.