Aiphone JE-1F-T Monitor Extension Unit Instruction Manual

1. Прадукт скончыўсяview

The Aiphone JE-1F-T is a monitor extension unit designed to expand your existing Aiphone JE series intercom system. It features a 3.5-inch TFT color LCD monitor, providing clear visual communication. This unit is compatible with JIS 1-gang switch boxes for easy installation.

Please note that internal communication between this extension unit and the master unit, or between multiple indoor units, is not supported. The system supports a maximum configuration of one entrance station and one master unit plus one extension unit.

Выява 1.1: Спераду view of the Aiphone JE-1F-T Monitor Extension Unit, showing the 3.5-inch color display and control buttons.

2. Настройка і ўстаноўка

2.1 Меры бяспекі

• Ensure power is disconnected before installation to prevent electric shock.
• Усталёўку павінен выконваць кваліфікаваны спецыяліст.
• Do not expose the unit to water or excessive humidity.

2.2 Мантаж

1. Prepare a standard JIS 1-gang switch box in the desired indoor location.
2. Ensure sufficient space for wiring connections behind the unit.

2.3 Электраправодка

The JE-1F-T unit uses an AC power direct connection. Connect the power supply wires (AC100V 50/60Hz) according to local electrical codes and the wiring diagram provided in the full installation guide (not included in this manual). Connect the communication wires to the master unit as specified in your system's wiring instructions.

• Connect AC power (100V, 50/60Hz) directly to the unit.
• Connect the communication lines from the master unit.
• Secure all connections properly to prevent disconnections.

3. Аперацыя

3.1 Адказ на званок

• When a visitor presses the call button at the entrance station, the monitor will activate and an audible chime will sound.
• Press the 'Talk' button on the JE-1F-T unit to establish two-way audio communication with the visitor.
• To end the conversation, press the 'Talk' button again or the call will automatically terminate after a set period.

3.2 Monitoring the Entrance

• каб view the entrance station without a call, press the 'Monitor' button. The display will show the live video feed.
• Press the 'Monitor' button again to turn off the display.

3.3 Адмыканне дзвярэй (калі падключана)

• During a conversation with a visitor, press the 'Door Release' button to unlock the entrance door.
• Ensure the door release mechanism is properly installed and configured with your master unit.

4. Тэхнічнае абслугоўванне

4.1 Ачыстка

• Працярыце прыладу мяккай сухой тканінай.
• Для ўстойлівага бруду злёгку ачысціцеampпрамыйце тканіну вадой, а затым вытрыце насуха.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.

4.2 Агульны догляд

• Пазбягайце размяшчэння прылады пад прамымі сонечнымі прамянямі або побач з крыніцамі цяпла.
• Не кідайце прыладу і не падвяргайце яе моцным ударам.

5. Выпраўленне непаладак

5.1 No Power to the Unit

• Check if the AC power supply is connected correctly and if the circuit breaker is not tripped.
• Пераканайцеся, што разетка працуе.

5.2 Няма відэадысплея

• Ensure all communication wires are securely connected between the entrance station, master unit, and extension unit.
• Confirm that the entrance station camera lens is clean and unobstructed.

5.3 No Audio During Call

• Check communication wiring for loose connections.
• Ensure the 'Talk' button is pressed during conversation.

5.4 Cannot Communicate Between Indoor Units

As stated in the product overview, the Aiphone JE-1F-T does not support internal communication between indoor units or with the master unit. This is a design specification of the product.

If problems persist after attempting these troubleshooting steps, please contact your installer or Aiphone customer support.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation included with your purchase or contact your authorized Aiphone dealer or the Aiphone customer service directly. Please have your product model number (JE-1F-T) and purchase date available when contacting support.