Hager EK570 Battery-Powered Thermostat User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Інфармацыя па бяспецы

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Захоўвайце прыладу далей ад дзяцей.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Мацавальныя шрубы і дзюбелі (пры наяўнасці)
• Гэта кіраўніцтва карыстальніка

4. Прадукт скончыўсяview

Familiarize yourself with the components of your Hager EK570 thermostat:

Малюнак 1: Спераду view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• ВК-дысплей: Паказвае бягучую тэмпературу, час, дзень тыдня, рэжым працы і статус праграмы.
• Кнопкі кіравання: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Батарэйны адсек: Размешчаны ў задняй частцы прылады.

5. Настройка

5.1. Устаноўка батарэі

1. Remove the back cover of the thermostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Устаноўка тэрмастата

The Hager EK570 is designed for surface mounting.

1. Выберыце падыходнае месца на ўнутранай сцяне, далей ад прамых сонечных прамянёў, скразнякоў і крыніц цяпла (напрыклад, радыятараў,amps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. Прасвідруйце адтуліны і ўстаўце дзюбелі.
5. Secure the base plate to the wall using the provided screws.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Інструкцыя па эксплуатацыі

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. Selecting Operating Modes

The thermostat supports the following modes:

• Камфортны рэжым: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Паменшаны рэжым: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Рэжым абароны ад замярзання: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• Ручной рэжым: Allows you to set a constant temperature that overrides any programmed schedule.
• Рэжым адпачынку: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Рэгуляванне зададзенага значэння тэмпературы

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Штотыднёвае праграмаванне

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Тэхнічнае абслугоўванне

7.1. Уборка

Ачысціце тэрмастат casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Замена батарэі

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Remove the back cover of the thermostat.
2. Выміце старыя батарэі.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Усталюйце заднюю крышку.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager webсайт або звярніцеся да аўтарызаванага прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі.