ЖурналTag UTRIX-16 PDF Temperature Data Logger User Manual

1. Уводзіны

ЖурналTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Інфармацыя па бяспецы

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
• Утылізуйце батарэі ў адпаведнасці з мясцовымі правіламі.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• ЖурналTag UTRIX-16 PDF Temperature Data Logger
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Прылада скончанаview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Малюнак 1: Фронт view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• Кнопка СТОП: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Малюнак 2: ЖурналTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Настройка

5.1 Пачатковая канфігурацыя

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webсайт.

1. Download and install the LogTag Праграму аналізатар ад ЖурналTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Малюнак 3: ЖурналTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. ЖурналTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Інфармацыя аб батарэі

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Аперацыя

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Націсніце і ўтрымлівайце СТАРТ/Марк button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Націсніце і ўтрымлівайце СТОП button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Каротка націсніце СТАРТ/Марк button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. Прылада будзе адлюстроўвацца як здымны дыск.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Праграму аналізатар.

8. Тэхнічнае абслугоўванне

8.1 Ачыстка

Працірайце прыладу мяккай губкайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.

8.2 Замена батарэі

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Выпраўленне непаладак

10. Тэхнічныя характарыстыкі

11. Гарантыя і падтрымка

ЖурналTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webсайт або звярніцеся да мясцовага дыстрыбутара. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Official LogTag Webсайт: www.logtag-recorders.com