Legrand 138074 Manual Call Point Instruction Manual

1. Прадукт скончыўсяview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Малюнак 1: Спераду view of the Legrand 138074 Manual Call Point.

2. Інфармацыя па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі па тэхніцы бяспекі перад устаноўкай або эксплуатацыяй гэтай прылады. Невыкананне гэтых інструкцый можа прывесці да пашкоджання маёмасці, траўмаў або смерці.

• Прафесійная ўстаноўка: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Адключэнне сілкавання: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• тtagэлектронная праверка: Пераканайцеся, што блок харчавання voltage matches the device's specifications.
• Умовы навакольнага асяроддзя: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Цэласнасць кампанентаў: Не выкарыстоўвайце прыладу, калі якая-небудзь частка пашкоджана.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты ёсць у наяўнасці і не пашкоджаны:

• Legrand 138074 Manual Call Point (1 unit)
• Мацавальныя шрубы (колькасць у камплекце)
• Інструкцыя па эксплуатацыі (гэты дакумент)

4. Настройка і ўстаноўка

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Мантаж

1. Падрыхтуйце мантажную паверхню: Ensure the surface is clean, dry, and flat.
2. Адзначыць кропкі свідравання: Use the call point's base as a template to mark the positions for mounting screws.
3. Свідраваць адтуліны: Drill pilot holes appropriate for the mounting screws.
4. Абараніце базу: Attach the call point's base securely to the wall using the provided screws.

4.2. Электраправодка

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Пераканайцеся, што ўсе злучэнні надзейныя і належным чынам ізаляваны.

Малюнак 2: Унутраны view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Канчатковая зборка

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Інструкцыя па эксплуатацыі

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Актывуйце сігналізацыю: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Праверка актывацыі: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Эвакуірую: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the reliable operation of your manual call point.

• Візуальны агляд: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Уборка: Clean the exterior of the call point with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Функцыянальнае тэставанне: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Замена кампанентаў: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Выпраўленне непаладак

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Тэхнічныя характарыстыкі

9. Інфармацыя аб гарантыі

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Падтрымка і кантакты

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webсайт:

www.legrand.com

Пры звароце ў службу падтрымкі, калі ласка, падрыхтуйце нумар мадэлі вашага прадукту (138074) і ўсю адпаведную інфармацыю аб пакупцы.