WALI M001XL Single Extra Tall Monitor Arm Mount Instruction Manual

1. Уводзіны

Thank you for choosing the WALI M001XL Single Extra Tall Monitor Arm Mount. This product is designed to enhance your workspace by providing a flexible and ergonomic solution for mounting your monitor. By following these instructions, you can ensure a safe and efficient setup, allowing you to optimize your viewing experience and reclaim valuable desk space.

This monitor arm is compatible with most flat panel monitors up to 32 inches and supports a weight capacity of up to 22 lbs. It features detachable and height-adjustable mount plates for VESA patterns 75x75mm and 100x100mm.

2. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе пералічаныя ніжэй кампаненты ўваходзяць у камплект:

• 1 x WALI Extra Tall Single Monitor Mount (Black)
• 1 x Mounting Hardware Kit (various screws, washers, and tools)
• 1 х Кіраўніцтва карыстальніка

Малюнак 2.1: Змест пакета

3. Тэхнічныя характарыстыкі

Figure 3.1: Display Compatibility

Малюнак 3.2: Памеры вырабу

4. Настройка і ўстаноўка

The WALI M001XL monitor arm offers two installation options: C-Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1 C-Clamp Ўстаноўка

1. Прымацуеце C-clamp to the bottom of the main pole.
2. Position the pole on the edge of your desk.
3. Зацягніце C-clamp screw until the mount is securely fastened to the desk. Ensure the desk thickness is between 0.4" and 3.5".

4.2 Grommet Base Installation

1. If your desk has a grommet hole, insert the grommet base through the hole. Ensure the desk thickness is between 0.4" and 3".
2. Secure the base from underneath the desk using the provided hardware.
3. Attach the main pole to the secured grommet base.

Figure 4.1: C-Clamp Ўстаноўка

Figure 4.2: Grommet Base Installation

4.3 Падключэнне манітора

1. Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit.
2. Slide the monitor (with the attached VESA plate) onto the arm's mounting head.
3. Secure the monitor by tightening the locking screw on the mounting head.

Figure 4.3: Attaching VESA Plate to Monitor

Figure 4.4: Sliding Monitor onto Arm

Figure 4.5: Fully Assembled Monitor Arm

4.4 Арганізацыя кабеляў

Utilize the integrated cable clips along the arm and pole to route your monitor cables for a tidy and organized setup. This helps prevent cable clutter and potential damage.

Малюнак 4.6: Кіраванне кабелем

4.5 Дэманстрацыйнае відэа па ўсталёўцы

Video 4.1: This video demonstrates the unboxing and initial setup of the WALI M001XL monitor arm, including attaching it to a desk and mounting a monitor. It also shows how to manage cables for a clean look.

5. Эксплуатацыя і рэгуляванне

The WALI M001XL monitor arm provides various adjustment options to achieve your desired viewing angle and ergonomic position.

5.1 Рэгуляванне вышыні

To adjust the monitor's height along the 31.5-inch pole, loosen the collar clamp on the pole, slide the arm to the desired height, and then securely tighten the clamp.

Figure 5.1: Height Adjustment

5.2 Нахіл, паварот і кручэнне

The monitor arm allows for flexible positioning:

• Нахіл: Adjust the monitor screen +/-90° vertically to reduce glare and optimize viewінж.
• Паваротны: Swivel the monitor +/-90° horizontally at the arm joint or 360° around the pole to share your screen or change viewныя вуглы.
• Кручэнне: Rotate the monitor 360° to switch between landscape and portrait modes.

Figure 5.2: Angle Adjustment Options

5.3 Adjustment Demonstration Video

Video 5.1: This video demonstrates the various adjustments of the WALI M001XL monitor arm, including height, tilt, swivel, and rotation, showcasing its flexibility for different viewзадавальнення патрэб.

6. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your WALI monitor arm, follow these simple maintenance guidelines:

• Рэгулярная ўборка: Працярыце мацаванне мяккай губкайamp сурвэткай для выдалення пылу і бруду. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
• Праверце герметычнасць: Periodically check all screws and connections to ensure they are securely tightened. Over time, vibrations or frequent adjustments may cause them to loosen.
• змазка: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

7. Выпраўленне непаладак

If you encounter any issues with your WALI monitor arm, please refer to the following common problems and solutions:

• Monitor is sagging or not holding position:
  Ensure all adjustment screws on the arm joints and VESA plate are tightened. For height adjustment, ensure the pole clamp цалкам абаронены.
• Mount is wobbly:
  Праверце, ці C-clamp or grommet base is securely fastened to the desk. The desk surface should be stable and capable of supporting the weight of the mount and monitor.
• Цяжкасці з рэгуляваннем рычага:
  Check if any locking mechanisms are engaged. Loosen them slightly before attempting to adjust, then re-tighten once the desired position is achieved.
• Cables are not staying in clips:
  Ensure cables are properly routed and not overstuffed in the clips. If clips are damaged, contact customer support for replacements.

If the problem persists after attempting these solutions, please contact WALI customer support.

8. Гарантыя і падтрымка

WALI products are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official WALI website. Our experienced and friendly US-based customer support team is available to assist you 7 days a week for any questions or concerns regarding your product.

Для падтрымкі наведайце: WALI Store on Amazon