KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. Прадукт скончыўсяview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. Настройка

2.1 Устаноўка батарэі

The KWANWA KW715S operates on 2 шчолачныя батарэі АА (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 Пачатковая ўстаноўка часу

1. Націсніце і ўтрымлівайце УСТАНОВА ЧАСУ button (located on the back) for 2 seconds until the hour digits begin to flash.
2. Выкарыстоўвайце ГАДЗІНА і МІН кнопкі для рэгулявання часу.
3. Прэса УСТАНОВА ЧАСУ яшчэ раз, каб пацвердзіць і выйсці з рэжыму налады часу.

2.3 Выбар адзінак вымярэння тэмпературы (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. Інструкцыя па эксплуатацыі

3.1 Налада будзільніка

1. Націсніце і ўтрымлівайце AL SET button (on the back) for 2 seconds until the alarm hour digits flash.
2. Выкарыстоўвайце ГАДЗІНА і МІН кнопкі, каб усталяваць патрэбны час будзільніка.
3. Прэса AL SET again to confirm and exit alarm setting mode.

3.2 Уключэнне/выключэнне будзільніка

Выкарыстоўвайце AL ВКЛ/ВЫКЛ switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 Функцыя паўтору

When the alarm sounds, gently touch the large СНАОЗ button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

3.4 Рэгуляваная яркасць

Націсніце УСТАНОВА ЧАСУ button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12/24 ГАДЗ кнопка).

4. Тэхнічнае абслугоўванне

4.1 Замена батарэі

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 Ачыстка

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. Выпраўленне непаладак

• Мігаценне дысплея: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• Будзільнік не гучыць: Забяспечце AL ВКЛ/ВЫКЛ switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• Індыкатар разраду батарэі: This icon signals that the batteries are running low and should be replaced soon.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

For warranty information or product support, please contact KWANWA customer service at: support@odokeeshop.com.