Utilitech 0302325

Utilitech 0302325 Candelabra Light Control Instruction Manual

Мадэль: 0302325

1. Уводзіны

The Utilitech 0302325 Candelabra Light Control is designed to automate your incandescent lighting. This device features a dusk-to-dawn sensor, which automatically turns candelabra-based incandescent bulbs on when it gets dark and off when it becomes light. It is suitable for both indoor and outdoor applications, providing convenience and energy efficiency.

2. Інфармацыя па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі перад устаноўкай або эксплуатацыяй гэтага прадукта. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або іншых небяспек.

  • ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай блока засцерагальнікаў або аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.
  • This device is designed for use with incandescent bulbs only, up to 60W. Do not exceed the maximum wattage.
  • Ensure the light control is installed in a location where it is protected from direct water spray if used outdoors, although it is water resistant.
  • Do not attempt to modify or repair the device. Refer all servicing to qualified personnel.
  • Беражыце ад дзяцей.

3. Змесціва ўпакоўкі

Перад усталёўкай пераканайцеся, што ўсе кампаненты наяўныя:

  • Utilitech 0302325 Candelabra Light Control (Quantity may vary based on purchase pack)
  • Кіраўніцтва па эксплуатацыі (гэты дакумент)

4. Настройка і ўстаноўка

The Utilitech 0302325 Candelabra Light Control features a simple screw-in installation process.

  1. Выключыць харчаванне: Перад пачаткам усталёўкі пераканайцеся, што электраэнергія свяцільні адключана з дапамогай аўтаматычнага выключальніка або блока засцерагальнікаў.
  2. Выдаліць існуючую лямпачку: Carefully remove the existing candelabra-based incandescent bulb from the fixture.
  3. Screw in Light Control: Screw the Utilitech 0302325 Candelabra Light Control into the empty candelabra socket. Ensure it is securely tightened.
  4. Усталяваць лямпачку: Screw your candelabra-based incandescent bulb (up to 60W) into the socket on the Utilitech light control.
  5. пазіцыянаванне: For optimal performance, ensure the sensor on the light control is not obstructed and can detect ambient light levels accurately. Avoid positioning it where artificial light sources (e.g., other lamps, streetlights) might directly shine on the sensor, as this could interfere with its operation.
  6. Аднавіць сілу: Once the light control and bulb are securely installed, restore power to the fixture at the circuit breaker or fuse box.
Utilitech 0302325 Candelabra Light Control, bronze color, shown with a candelabra bulb screwed into it, ready for installation into a light fixture.

Figure 1: Utilitech 0302325 Candelabra Light Control. This image shows the bronze-colored light control unit, designed to screw into a candelabra socket, with a bulb then screwing into the control unit itself.

5. Аперацыя

The Utilitech 0302325 Candelabra Light Control operates automatically based on ambient light levels.

  • Функцыянальнасць ад змяркання да світання: The integrated sensor detects when natural light levels fall below a certain threshold (dusk) and automatically turns on the connected incandescent bulb.
  • Аўтаматычнае адключэнне: When natural light levels rise above the threshold (dawn), the sensor will automatically turn off the connected bulb.
  • No manual adjustment or programming is required for its basic operation.

6. Тэхнічнае абслугоўванне

The Utilitech 0302325 Candelabra Light Control requires minimal maintenance.

  • Уборка: Periodically wipe the exterior of the light control with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents. Ensure the sensor area remains clean for accurate light detection.
  • Замена лямпачкі: When the incandescent bulb needs replacement, ensure power is turned off at the circuit breaker before unscrewing the old bulb and installing a new one.
  • There are no user-serviceable parts inside the light control unit.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца ў змярканні.
  • Няма харчавання на свяцільні.
  • Перагарэла лямпачка.
  • Sensor is obstructed or receiving too much light.
  • Light control is faulty.
  • Праверце выключальнік/засцерагальнік.
  • Замяніць лямпачку.
  • Ensure sensor is clear and not exposed to artificial light.
  • Replace the light control unit.
Light does not turn off at dawn.
  • Sensor is obstructed or not receiving enough light.
  • Light control is faulty.
  • Ensure sensor is clear and exposed to natural daylight.
  • Replace the light control unit.
Bulb shines at reduced brightness.
  • Incompatible bulb type (e.g., LED instead of incandescent).
  • Faulty light control unit.
  • Ensure an incandescent bulb is used. This device is designed for incandescent bulbs only.
  • Replace the light control unit.

8. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэлі0302325 (Part Number: 43497-23210)
МаркаUtilitech
ТыпDusk-to-dawn Candelabra Light Control
Тып ўстаноўкіЎкручванне
Сумяшчальнасць тыпаў лямпачакIncandescent (Candelabra-based)
Максімальная ватtage60 ват
тtage120 вольт
Выкарыстанне ў памяшканні/на вуліцыУ памяшканні, на адкрытым паветры
МатэрыялПластыкавыя
Колер/аздабленнеБронза
Спіс бяспекіETL уключаны ў спіс
Вага прадмета1.76 унцыі (прыблізна 0.11 фунта)
Памеры (пакет)6.6 х 3.4 х 1 цалі

9. Гарантыя і падтрымка

Specific warranty information for the Utilitech 0302325 Candelabra Light Control is typically provided with the product packaging or can be obtained from the retailer at the time of purchase. Please retain your proof of purchase for warranty claims.

For technical support or further assistance, please contact Utilitech customer service or refer to the official Utilitech webсайт для кантактнай інфармацыі. Visit Utilitech.com

Звязаныя дакументы - 0302325

прэview Сонечны ахоўны свяцільнік Utilitech 2 CT Linkable: усталёўка і характарыстыкі
Кіраўніцтва па ўсталёўцы і падключэнні сонечнага асвятляльніка бяспекі Utilitech 2 CT Linkable Dusk-to-Dawn. Даведайцеся пра ўстаноўку, ліквідацыю непаладак і функцыі эфектыўнага вонкавага асвятлення.
прэview Utilitech 7116-02 Ventilation Fan with Edge-Lit LED Light Installation and Operation Manual
This manual provides detailed instructions for the installation, operation, care, and troubleshooting of the Utilitech 7116-02 Ventilation Fan with Edge-Lit LED Light. It includes product specifications, package contents, safety information, and warranty details.
прэview Кароткі даведнік па святлодыёднай стужцы Utilitech
Кароткі даведнік па святлодыёднай стужцы Utilitech (мадэль LR0005-LED36K60RGBW), які змяшчае неабходную інфармацыю па бяспецы, этапы падрыхтоўкі, інструкцыі па ўсталёўцы, парады па доглядзе і абслугоўванні, інфармацыю аб гарантыі і рашэнні для ліквідацыі непаладак для аптымальнага выкарыстання і даўгавечнасці.
прэview Кіраўніцтва карыстальніка і інфармацыя па бяспецы для галагенавай рабочай лямпы UTILITECH MPL1025-C500K9030
Атрымайце падрабязныя інструкцыі, папярэджанні аб бяспецы, парады па ліквідацыі непаладак і інфармацыю аб гарантыі для галагенавай рабочай лямпы UTILITECH (мадэль MPL1025-C500K9030). Даведайцеся, як бяспечна эксплуатаваць, абслугоўваць і ліквідаваць непаладак вашай рабочай лямпы.
прэview UTILITECH BNT-150 Ceramic Heater User Manual & Safety Guide
This comprehensive manual for the UTILITECH BNT-150 Ceramic Heater covers product features, safety instructions, installation, operation, and maintenance for optimal performance and user safety.
прэview Кіраўніцтва па ўсталёўцы і бяспецы 12-цалёвага падключальнага святлодыёднага свяцільніка пад шафу Utilitech
Поўнае кіраўніцтва па падключаемым святлодыёдным свяцільні Utilitech 12 цаляў для падсветкі пад шафу (мадэль MXW1003-LED6K9027), якое ахоплівае падрыхтоўку, усталёўку, ліквідацыю непаладак, бяспеку і інфармацыю аб гарантыі.