Mounting Dream MD2296-24K Full Motion TV Wall Mount Instruction Manual

1. Прадукт скончыўсяview

This manual provides detailed instructions for the safe and proper installation and operation of your Mounting Dream MD2296-24K Full Motion TV Wall Mount. This mount is designed to securely hold most 42-84 inch flat or curved screen televisions weighing up to 100 LBS (45.3 kg).

The full motion design allows for optimal viewing angles with tilt, swivel, and extension capabilities. Please read all instructions carefully before beginning installation.

Інфармацыя па бяспецы

• ПАПЯРЭДЖАННЕ: Do not install this product into drywall alone. It must be mounted into solid concrete walls or wood studs.
• Пераканайцеся, што канструкцыя сцяны можа бяспечна вытрымаць сумарную вагу мацавання і тэлевізара.
• Always use a stud finder to accurately locate wood studs.
• Two people are recommended for safe installation, especially when lifting the television.
• Do not exceed the maximum weight capacity of 100 LBS (45.3 kg).

2. Змесціва ўпакоўкі

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Mounting Dream customer service.

выява: Скончанаview of the Mounting Dream MD2296-24K TV Wall Mount and included hardware. This image displays the main wall plate, articulating arms, TV brackets, and various screws, washers, spacers, a small level, and cable ties.

Included Hardware (Exampле)

• Зборка насценнай пласціны
• TV Bracket Arms (2)
• Lag Bolts (for wood studs/concrete)
• Concrete Anchors (may require separate request from Mounting Dream)
• Assorted TV Screws (M4, M6, M8)
• Шайбы і пракладкі
• Пузырьковый ўзровень
• Кабельныя сцяжкі
• Мантажны шаблон

3. Праверка сумяшчальнасці

Before installation, confirm that this mount is compatible with your television and wall type.

выява: Visual guide for checking TV mount compatibility, illustrating VESA pattern, TV weight and size, potential port blockage, and suitable wall types.

Тэхнічныя характарыстыкі тэлевізара

• Памер тэлевізара: Most 42-84 inch OLED/LED/Plasma/Curved TVs.
• Ёмістасць вагі: Maximum 100 LBS (45.3 kg).
• Сумяшчальнасць VESA: Max VESA 600x400mm (24"x16"). Common VESA patterns supported include 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x300mm, 600x200mm, 600x400mm.
• Blocked Inputs: Check the location of your TV's input ports to ensure the mount will not block them.

Сумяшчальнасць тыпаў сцен

выява: Illustration of compatible wall types: solid concrete wall, wood stud wall (16", 18", 24" spacing), and brick wall. A warning indicates not to mount on drywall alone.

• Драўляныя сцены з каркасамі: Сумяшчальнасць з драўлянымі стойкамі з адлегласцю 16", 18" і 24" (20 см).
• Solid Concrete Walls: Requires appropriate concrete anchors (contact Mounting Dream for these if not included).
• Цагляныя сцены: Requires appropriate anchors (contact Mounting Dream for these if not included).
• ВАЖНА: This TV mounting bracket is НЕ for drywall alone.

4. Настройка і ўстаноўка

Follow these steps carefully for a secure installation. It is highly recommended to have a second person assist with the installation, especially when lifting the TV.

Неабходныя інструменты (не ўключаны)

• Сілавая дрыль
• Выкрутка для галоўкі Філіпс
• Ratchet Set (for lag bolts)
• Шукальнік даследаванняў
• Аловак
• Вымяральная стужка
• Ахоўныя акуляры

Этапы ўстаноўкі

выява: Simplified 3-step installation process: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.

1. Determine TV Placement: Decide the desired height and horizontal position for your TV. Use painter's tape to outline the TV's position on the wall for visual reference.
2. Знайдзіце насценныя стойкі: Use a stud finder to accurately locate the center of the wood studs in your desired mounting area. Mark the stud locations with a pencil. For concrete or brick walls, ensure you have the correct anchors and drill bits.
3. Прымацуйце кранштэйны да тэлевізара: Carefully place your TV face down on a soft, clean surface. Attach the vertical TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are centered and securely fastened.
4. Position and Mark Wall Plate: Hold the wall plate assembly against the wall at your desired height, aligning it with the marked stud centers. Use the provided mounting template if available. Use the included bubble level to ensure the wall plate is perfectly horizontal. Mark the drilling points for the lag bolts.
5. Прасвідраваць пілотныя адтуліны: Using a power drill, drill pilot holes at the marked locations. For wood studs, follow the recommended drill bit size in the instructions. For concrete/brick, use a masonry drill bit and ensure the holes are deep enough for the anchors.
6. Усталяваць насценную пліту: Secure the wall plate assembly to the wall using the lag bolts and washers. Tighten them firmly with a ratchet set, but do not overtighten.
7. Test Wall Mount: Before hanging the TV, extend the articulating arms and apply gentle downward pressure to ensure the mount is securely fastened to the wall.
8. Павесьце тэлевізар: With the help of a second person, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is properly seated and secure.
9. Надзейнае мацаванне тэлевізара: Locate the safety screws or clips on the TV brackets and tighten them to prevent the TV from accidentally lifting off the wall plate.

5. Эксплуатацыя і рэгуляванне

Your Mounting Dream MD2296-24K mount offers various adjustments to achieve the optimal viewвопыту.

Flexible Extension and Retraction

выява: Diagram showing the TV mount extending up to 16.7 inches from the wall and retracting to 2.6 inches, illustrating its flexible positioning.

Gently pull the TV away from the wall to extend the articulating arms. Push the TV back towards the wall to retract it. The mount extends up to 16.7 inches and retracts to 2.6 inches from the wall.

Рэгуляванне нахілу

выява: Visual representation of the TV mount's tilt range, from +5 degrees upward to -15 degrees downward, designed to reduce screen glare.

The mount allows for a tilt range of +5° (upward) to -15° (downward). Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to the desired angle, and then securely tighten the knobs/bolts.

Рэгуляванне павароту

выява: Depiction of the TV mount's swivel capability, allowing the TV to rotate up to +/-45 degrees horizontally for viewз розных пазіцый.

The articulating arms allow the TV to swivel up to 45° left or right. Gently push or pull the TV to the desired horizontal viewкут нахілу.

Рэгуляванне ўзроўню

выява: Illustration of the TV mount's post-installation level adjustment feature, allowing for a fine-tuning of +/-4 degrees to correct any slight tilt after mounting.

If the TV is not perfectly level after installation, you can adjust it by ±4°. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then retighten the screws.

6. Тэхнічнае абслугоўванне

Рэгулярнае абслугоўванне забяспечвае даўгавечнасць і бяспечную працу вашага насценнага мацавання для тэлевізара.

• Перыядычная праверка: Every few months, check all screws and bolts to ensure they are securely tightened.
• Уборка: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• змазка: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints.

7. Выпраўленне непаладак

If you encounter issues during or after installation, refer to the following common solutions.

• Тэлевізар не стаіць роўна: Use the ±4° level adjustment feature as described in Section 5. Ensure the wall plate was installed level initially.
• Mount feels loose on the wall: Re-check all lag bolts securing the wall plate to the wall. Ensure they are tightened into solid wood studs or concrete with appropriate anchors.
• TV is difficult to move/adjust: Check for any overtightened bolts on the articulating arms or tilt mechanism. Apply a small amount of silicone lubricant if necessary.
• Адсутнічае абсталяванне: Refer to Section 2 for package contents. Contact Mounting Dream customer service for replacement parts.

For further assistance, please contact Mounting Dream customer service.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка кліентаў

Mounting Dream імкнецца прадастаўляць высакаякасную прадукцыю і выдатнае абслугоўванне кліентаў.

Інфармацыя аб гарантыі

This Mounting Dream TV wall mount is backed by a Гарантыя 10 год, што гарантуе спакой адносна яго якасці і даўгавечнасці.

Падтрымка кліентаў

Our US-based customer service experts are available every day of the week to assist you with any questions or concerns regarding installation, operation, or product issues. Please refer to the product packaging or the official Mounting Dream webсайт для кантактных дадзеных.