1. Уводзіны
The Kramer TP-789R is a high-performance HDBaseT receiver designed for extending 4K60Hz (4:2:0) HDMI, RS-232, and IR signals over twisted pair cabling. This device supports bidirectional Power over Ethernet (PoE), allowing it to either supply power to a PoE acceptor device or receive power from a remote PoE provider. It extends video signals up to 40 meters (130 feet) for 4K@60Hz (4:2:0) resolution and up to 70 meters (230 feet) for 1080p HD video resolutions over Kramer copper cables. This manual provides essential information for the proper installation, operation, and maintenance of your TP-789R receiver.
2. Асноўныя магчымасці
- HDBaseT 1.0 receiver for reliable signal extension.
- Supports bidirectional PoE (Power over Ethernet/HDBaseT) for flexible power solutions.
- Extends 1080p signals up to 70 meters (230 feet).
- Extends 4K@60Hz (4:2:0) signals up to 40 meters (130 feet).
- Includes control extension capabilities for RS-232 and IR signals.
3. Змесціва ўпакоўкі
Праверце, ці ёсць усе прадметы ў вашай упакоўцы:
- Kramer TP-789R Receiver Unit
- Блок харчавання (калі не выкарыстоўваецца PoE)
- Камплект мантажных кранштэйнаў
- Кароткае кіраўніцтва
4. Фізічны апісанне
Familiarize yourself with the ports and indicators on the TP-789R receiver.
Малюнак 1: Front and Rear Panels of the Kramer TP-789R Receiver. The image displays the compact black casing of the TP-789R, with the Kramer DigiTOOLS logo on the top. The front panel shows DIP switches for setup, and LED indicators for IN, OUT, LINK, POE, and ON/FEEDER status. The rear panel features an HDBT IN port (RJ-45), HDMI OUT port, IR port, RS-232 terminal block, and a 48V DC power input.
4.1 Пярэдняя панэль
- SETUP DIP Switches: Used for configuring device settings. Refer to the detailed setup guide for specific configurations.
- У святлодыёдзе: Indicates incoming HDBaseT signal.
- OUT LED: Indicates outgoing HDMI signal.
- LED LINK: Indicates HDBaseT link status.
- POE LED: Паказвае стан харчавання праз Ethernet.
- ON/FEEDER LED: Indicates power status and PoE feeding activity.
4.2 Задняя панэль
- HDBT IN: RJ-45 connector for HDBaseT input from a compatible transmitter.
- Выхад HDMI: HDMI connector for connecting to a display device.
- ВК: 3.5mm jack for IR receiver/emitter connection.
- RS-232: Terminal block for serial control communication.
- 48 В пастаяннага току: Power input for external power adapter (if not using PoE).
5. Настройка і ўстаноўка
Follow these steps to properly set up your Kramer TP-789R receiver.
5.1 Схема падлучэння
Малюнак 2: Typical Connection Diagram for Kramer TP-789R. This diagram illustrates the connection of a Blu-ray Player (HDMI source) to a Kramer WP-20 wall plate (HDBaseT transmitter) via HDMI and RS-232. The WP-20 then connects to the TP-789R receiver via HDBaseT (Cat cable), which also carries PoE. The TP-789R outputs HDMI to a display and RS-232 to a control device (SL-240C). An optional external power supply can be connected to the TP-789R.
5.2 Этапы ўстаноўкі
- Прылады выключэння: Ensure all devices, including the TP-789R, source, and display, are powered off before making any connections.
- Connect HDBaseT Cable: Connect a Cat cable (e.g., Cat 6a) from the HDBaseT output of a compatible transmitter (e.g., Kramer WP-20) to the HDBT У port on the TP-789R. Ensure the cable length is within the specified limits (up to 40m for 4K, 70m for 1080p).
- Падключэнне выхаду HDMI: Падключыце кабель HDMI ад ВЫХАД HDMI port on the TP-789R to the HDMI input of your display device (e.g., TV, projector).
- Connect Control (Optional):
- For RS-232 control, connect your control system to the РС-232 клеммная калодка.
- For IR control, connect an IR emitter/receiver to the IR порт.
- Падключэнне сілкавання:
- If using PoE, ensure your HDBaseT transmitter or network switch is providing power and the POE LED is on.
- If using an external power adapter, ensure it is correctly connected and the power outlet is functional.
- Уключэнне: Power on all connected devices. The LEDs on the TP-789R should illuminate to indicate proper connection and operation.
5.3 Канфігурацыя DIP-пераключальніка
The SETUP DIP switches on the front panel are used for advanced configuration. Refer to the Kramer TP-789R product page or full user manual on the Kramer website for detailed information on DIP switch settings for EDID management, HDBaseT modes, and other functionalities.
6. Інструкцыя па эксплуатацыі
Once properly installed, the TP-789R operates largely automatically. Ensure your source device is outputting a compatible HDMI signal and your display is set to the correct input.
- Перадача сігналу: The TP-789R will automatically detect the incoming HDBaseT signal and convert it to HDMI for your display.
- Святлодыёдныя індыкатары: Monitor the front panel LEDs (IN, OUT, LINK, POE) to confirm active connections and power status. A solid LINK LED indicates a stable HDBaseT connection.
- Кантрольны праход: RS-232 and IR signals are passed bidirectionally (if supported by the transmitter) allowing control of source or display devices from either end of the extension.
7. Тэхнічнае абслугоўванне
The Kramer TP-789R is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Уборка: Use a soft, dry cloth to clean the unit. Do not use liquid or aerosol cleaners.
- Вентыляцыя: Забяспечце дастатковую цыркуляцыю паветра вакол прылады. Не блакуйце вентыляцыйныя адтуліны.
- Асяроддзе: Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures, direct sunlight, and moisture.
- Абнаўленні прашыўкі: Перыядычна правярайце Крамера webсайт для атрымання даступных абнаўленняў прашыўкі для паляпшэння прадукцыйнасці або новых функцый.
8. Выпраўленне непаладак
If you encounter issues with your TP-789R, refer to the following common problems and solutions:
| праблема | Магчымая прычына / рашэнне |
|---|---|
| Няма відэавыхаду на дысплеі. |
|
| Intermittent video or flickering. |
|
| Няма харчавання на агрэгаце. |
|
| Control signals (RS-232/IR) not working. |
|
9. Тэхнічныя характарыстыкі
Technical specifications for the Kramer TP-789R receiver:
| Асаблівасць | Дэталь |
|---|---|
| мадэль | ТП-789Р |
| Марка | Крамер |
| Тэхналогія падлучэння | Ethernet, HDMI |
| Тып раздыма | HDMI, RJ45 |
| Дазвол відэа | Да 4K@60 Гц (4:2:0) |
| Max Extension (4K@60Hz) | 40m (130ft) over Kramer copper cables |
| Max Extension (1080p) | 70m (230ft) over Kramer copper cables |
| Падтрымка PoE | Bidirectional (Power over HDBaseT) |
| Control Extension | RS-232, ВК |
| Рэжым выхаду гуку | Стэрэа |
| Канфігурацыя канала аб'ёмнага гуку | 2.2 |
| Вага прадмета | 200 грам (7.1 унцый) |
| Колер | Чорны |
| Вытворца | Крамер |
| Дата першай даступнасці | 7 лістапада 2019 г |
10. Гарантыя і падтрымка
Kramer products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Kramer website. For technical support, product registration, or to download the latest drivers and firmware, please visit the Kramer Support Page or contact your local Kramer representative.
Кантактная інфармацыя:
- Webсайт: www.kramerav.com
- падтрымка: kramerav.com/us/support
