Манацэна 139786

Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord User Manual

Мадэль: 139786

Уводзіны

This manual provides essential information for the safe and effective use of your Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord. This power cord is designed to connect devices with an IEC 60320 C14 panel connector, such as PCs, monitors, scanners, and printers, to a standard North American AC wall outlet. Its 14AWG construction ensures robust power delivery for demanding applications.

Інфармацыя па бяспецы

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

Настройка

Follow these steps to properly set up your Monoprice power cord:

  1. Вызначыць раздымы: Locate the NEMA 5-15P (standard 3-prong wall plug) and the IEC 60320 C13 (female connector for devices) ends of the power cord.
  2. Падключыцеся да прылады: Insert the IEC 60320 C13 connector into the corresponding male IEC 60320 C14 inlet on your device (e.g., computer power supply, monitor). Ensure a firm connection.
  3. Падключыце да крыніцы харчавання: Plug the NEMA 5-15P end of the power cord into a standard, grounded North American AC wall outlet, UPS, or other compatible AC power source.
Monoprice 3-Prong Power Cord with NEMA 5-15P plug and IEC 60320 C13 connector
Image: The Monoprice 3-Prong Power Cord, featuring the NEMA 5-15P plug and IEC 60320 C13 connector. This image illustrates the overall design and robust construction of the cable.

For a visual comparison of the cable's thickness and quality, please refer to the video below:

Video: This video demonstrates the significant thickness difference between the Monoprice 14AWG power cable and a standard power supply cable, highlighting the superior gauge for enhanced safety and power handling.

Інструкцыя па эксплуатацыі

Once properly connected, the Monoprice power cord will supply power to your device. No further operational steps are required for the cord itself. Ensure your device's power switch is in the 'On' position if applicable.

Тэхнічнае абслугоўванне

To ensure the longevity and safe operation of your power cord, follow these maintenance guidelines:

Ліквідацыю непаладак

If you encounter issues with your power cord, refer to the following table:

праблемаМагчымая прычынаРашэнне
Прылада не атрымлівае сілкаваннеНяшчыльнае злучэннеEnsure both ends of the power cord are fully inserted.
Прылада не атрымлівае сілкаваннеПраблема з разеткайTest the outlet with another device or check the circuit breaker.
Прылада не атрымлівае сілкаваннеПашкоджаны сеткавы шнурInspect the cord for damage. Replace if necessary.
Cord feels warmПерагрузка або дрэнная вентыляцыяReduce the load on the circuit or ensure adequate airflow around the cord. If the cord is excessively hot, discontinue use immediately.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
раз'ём 1NEMA 5-15P (Male, Grounded)
раз'ём 2IEC 60320 C13 (раз'ём)
Датчык14 AWG
Бягучы рэйтынг15 Ampс (макс.)
тtage Рэйтынг125В
Тып курткіSJT (Service Junior Thermoplastic)
КолерЧорны
Памеры прадукту6.5 x 5.5 x 2 цалі (упакоўка)
Вага прадмета2.88 унцыі
Нумар мадэлі139786
ВытворцаМанацана

Гарантыя і падтрымка

Monoprice products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Monoprice website. For technical support or further assistance, please contact Monoprice customer service through their official channels.

Звязаныя дакументы - 139786

прэview Monoprice 35435 Mini SLA Printer Firmware Update Guide
Step-by-step instructions for updating the firmware on the Monoprice 35435 Mini SLA Printer to the latest version.
прэview Monoprice Select Mini 3D Printer User's Manual
Comprehensive user's manual for the Monoprice Select Mini 3D Printer, covering safety guidelines, setup, software installation (Cura, Repetier-Host), operation, and regulatory compliance. Includes detailed instructions for optimal 3D printing.
прэview Кабельная пласціна Monoprice з гнуткім адтулінай, 2-канальная, чорная - кіраўніцтва па хуткай усталёўцы (Артыкул 12583)
Пакрокавае кіраўніцтва па ўсталёўцы кабельнай пласціны Monoprice з гнуткім адтулінай (2-канальная, чорная, арт. 12583). Даведайцеся, як бяспечна ўсталёўваць нізкавольтныя прылады.tagкабелі за вашым плоскім тэлевізарам і аўдыё/відэапрыладамі.
прэview Рэгулятар гучнасці Monoprice 60 Вт з перамыкачом A/B. Кароткае кіраўніцтва па запуску
Кароткае кіраўніцтва па выкарыстанні рэгулятара гучнасці Monoprice магутнасцю 60 Вт з перамыкачом A/B (арт. 38176). У гэтым дакуменце прыведзены інструкцыі па падключэнні двух... amplifiers to a single volume controller, installation, setup, calibration, and technical specifications. It is compatible with amplifiers up to 120 watts and designed for one pair of speakers.
прэview Monoprice Maker Ultimate 2 3D Printer Quick Start Guide
Quick start guide for the Monoprice Maker Ultimate 2 3D Printer (P/N 36045), covering unboxing, setup, menu operation, and first print instructions. Learn about its FFF printing features, package contents, and customer support.
прэview Кіраўніцтва карыстальніка 3D-прынтара Monoprice Maker Select
Гэта кіраўніцтва карыстальніка змяшчае падрабязныя інструкцыі па наладзе, эксплуатацыі і абслугоўванні 3D-прынтара Monoprice Maker Select (мадэль 13860), ахопліваючы функцыі, праграмнае забеспячэнне і тэхнічную падтрымку.