1. Прадукт скончыўсяview
The SuperlightingLED DC12V RGB CCT LED Strip Light is a versatile, non-waterproof flexible LED tape light designed for various indoor lighting applications. It features a dual-row design with SMD 5050 LEDs for RGB colors and SMD 2835 LEDs for adjustable warm white (2700K) to daylight white (6000K) illumination. With a high CRI 90+, it ensures accurate color rendering.
Асноўныя характарыстыкі:
- RGBCCT Full Color + High CRI 90+: Offers vibrant RGB lighting and tunable white light from 2700K to 6000K with excellent color accuracy.
- Dual Row Design, 15mm Wide: High-density configuration with 1350 LEDs per roll for superior brightness, delivering up to 24,300 lumens.
- 12V DC Powered, Cuttable & Extendable: Operates safely on 12V DC. Each 5-meter (16.4ft) roll can be cut every 9 LEDs for custom lengths.
- Flexible with Strong Adhesive Backing: Easy installation on various surfaces due to its flexibility and durable adhesive.
- Універсальныя прымянення: Suitable for workbenches, retail displays, signage backlighting, videography, cabinet lighting, under-cabinet lighting, showcases, and trade show displays.
Змест пакета:
- 1 x 16.4FT LED strip light
Заўвага: This package includes only the LED strip light. A compatible 12V DC power supply and an RGBCCT controller are required for operation and must be purchased separately.
2. Інфармацыя па бяспецы
- Толькі для выкарыстання ў памяшканні: This LED strip light is non-waterproof (IP20 rated) and designed exclusively for indoor applications. Do not expose to moisture, water, or outdoor elements.
- крыніца харчавання: Use only a compatible 12V DC power supply. Connecting to an incorrect voltage can damage the strip and pose a safety risk.
- Электрычныя злучэнні: All electrical connections should be performed by a qualified individual if you are unsure. Ensure power is disconnected before making any connections or modifications.
- Рэзка: Разразайце святлодыёдную стужку толькі па адведзеных адзнаках (кожныя 9 святлодыёды). Разразанне ў іншым месцы пашкодзіць схему і зробіць гэты ўчастак непрыдатным для выкарыстання.
- Цяпло: While LED strips generate minimal heat, ensure adequate ventilation, especially when installed in enclosed spaces. Do not cover the strip with materials that could trap heat.
- Мантажная паверхня: Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesive performance.
3. Тэхнічныя характарыстыкі прадукту
| Асаблівасць | Дэталь |
|---|---|
| Тып святлодыёднай стужкі | SMD 5050 RGB + SMD 2835 Warm White + SMD 2835 Daylight White |
| Працоўная тэмпература | -4°F (-20°C) ~ 122°F (50°C) |
| Светлы колер | RGB + Warm White + Daylight White |
| Вымярэнне | 16.4Ft (5m) / roll |
| Блок для рэзкі | Every 9 LEDs (12V) |
| Колькасць святлодыёдаў | 1350 LEDs / roll |
| Працягласць жыцця | 50,000 XNUMX+ гадзін |
| Strip Dimensions (L x W x H) | 5000cm (197 in) x 1.5cm (0.59 in) x 0.25cm (0.1 in) |
| Уваходны кнtage | 12 В пастаяннага току |
| Working Power (Max) | 150W / 16.4ft (9.15W / foot) |
| Lamp Светлавы струмень | 18-20 Lumens / LED, 1,500 Lm / Ft, 24,300 Lumens / 16.4ft |
| Color Temperature CCT (White) | Warm White (2700K) to Daylight White (6000K) |
| Выкрайка пучка | 120 градусаў |
| Рэйтынг воданепранікальнасці | Non-waterproof IP20 |
| CRI (Ra>) | 90+ |
| Шырыня друкаванай платы | 15 мм (0.59 цалі) |
| Вага прадмета | 6.4 унцыі |
| Метад кантролю | App, Voice (with compatible controller) |
4. Інструкцыі па ўсталёўцы
4.1 Components Required (Sold Separately):
- Крыніца сілкавання 12 В пастаяннага току: Ensure the power supply has sufficient wattage for the length of the LED strip used.
- RGBCCT LED Controller: A compatible controller (e.g., RF remote or WiFi controller) is necessary to control the color, brightness, and color temperature of the strip.
Example of compatible accessories:
Wiring diagram showing connections to controller and power supply, with exampменш сумяшчальных аксесуараў.
4.2 Падрыхтоўка да ўстаноўкі:
- Схема размяшчэння: Determine the desired path for your LED strip. Measure the length required.
- Чыстая паверхня: Ensure the mounting surface is clean, dry, smooth, and free of dust or oil for optimal adhesion.
- Test Components: Before permanent installation, connect the LED strip, controller, and power supply to ensure all components function correctly.
4.3 Этапы ўстаноўкі:
- Cutting the LED Strip (if necessary):
The LED strip can be cut every 9 LEDs at the designated cut marks. Use sharp scissors to ensure a clean cut.
Illustration of LED strip cut points and dimensions.
Важная заўвага: The PCB width is 15mm, and the sleeve width is 17mm. Standard 6-pin quick connectors are not compatible with this width. It is recommended to cut and solder connections for custom lengths.
- Connecting the LED Strip:
Connect the LED strip to the RGBCCT controller. This strip uses a 5-wire connection (DC12V+, Red, Green, Blue, Warm White, Daylight White). Ensure correct polarity and wire assignment.
Detailed wiring diagram for the RGBCCT LED strip.
- Падключэнне крыніцы харчавання:
Connect the RGBCCT controller to the 12V DC power supply. Refer to the controller's manual for specific wiring instructions. - Mounting the LED Strip:
Peel off the protective backing from the strong blue adhesive on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm and even contact along its entire length.
5. Інструкцыя па эксплуатацыі
Operation of the SuperlightingLED RGB CCT LED Strip Light requires a compatible RGBCCT controller (purchased separately). The specific functions and controls will depend on the model of controller you are using. Refer to your controller's instruction manual for detailed operating procedures.
General Operation (via compatible controller):
- Уключэнне/выключэнне харчавання: Use the designated power button on your controller or app.
- Выбар колеру: Select from 16 million RGB colors using the color wheel or preset buttons on your controller/app.
RGB color display capabilities.
- Рэгуляванне белага святла: Adjust the white light color temperature from warm white (2700K) to daylight white (6000K).
Adjustable white light color temperatures.
- Кантроль яркасці: Dim or brighten the light output to your desired level.
- Modes/Scenes: Many controllers offer pre-programmed dynamic modes or the ability to create custom scenes.
- App/Voice Control: If using a WiFi controller, you may be able to control the strip via a smartphone app or voice assistants.
Example of indoor application and app control.
6. Тэхнічнае абслугоўванне
- Уборка: Ensure the LED strip is powered off and cool before cleaning. Gently wipe the surface with a soft, dry, or slightly damp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты, абразіўныя ачышчальнікі або празмерную вільготнасць.
- агляд: Periodically inspect the strip for any signs of damage, loose connections, or adhesive degradation.
- захоўванне: If storing the LED strip, ensure it is rolled neatly and kept in a dry, cool environment away from direct sunlight and extreme temperatures.
7. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святлодыёдная стужка не свеціцца. | No power to the strip/controller. Няправільная праводка. Faulty power supply or controller. | Check if the power supply is plugged in and receiving power. Verify all wiring connections between the strip, controller, and power supply are correct and secure. Test the power supply and controller with another compatible device if possible. |
| Incorrect colors or white light. | Incorrect wiring to the controller. Controller settings are wrong. | Ensure the R, G, B, WW, DW, and 12V+ wires are connected to the correct terminals on the controller. Refer to your controller's manual to ensure it is set to the correct output mode for RGBCCT strips. |
| Section of the strip is not lighting up. | Damage to the strip. Incorrect cut. | Inspect the non-working section for physical damage. If a section was cut incorrectly (not at the designated marks), it may be permanently damaged. |
| Клей не трымаецца. | Surface not properly cleaned. Surface is porous or uneven. | Ensure the surface is thoroughly cleaned and dry before application. For porous or uneven surfaces, consider using additional mounting clips or stronger adhesive. |
8. Гарантыя і падтрымка
8.1 Інфармацыя аб гарантыі:
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty duration and terms, please refer to the documentation provided with your purchase or contact the seller directly.
8.2 Падтрымка кліентаў:
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for assistance. When contacting support, please have your product model number (FLSDR-RGBCCT-1350) and purchase information readily available.
