HOMCOM Velvet Office Chair with Massage Lumbar Support - Model 921-298PK Instruction Manual

Уводзіны

Дзякуй за пакупкуasing the HOMCOM Velvet Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

Image: The HOMCOM Velvet Office Chair, showcasinяго дызайн і колер.

Інструкцыі па тэхніцы бяспекі

To ensure safe operation and prevent injury, please observe the following safety guidelines:

• Максімальная ёмістасць: Do not exceed the recommended maximum weight of 115 kg (253 lbs).
• зборка: Ensure the chair is correctly assembled according to the instructions before use. Do not use if any parts are damaged or improperly installed.
• Асяроддзе: Keep the area around the chair clean and free from obstacles to prevent injury.
• Стабільнасць: Avoid leaning excessively or using the chair in an unstable manner.
• дзеці: Keep children away from the chair during assembly and ensure they do not play with the chair unsupervised.

Змест пакета

Перад пачаткам зборкі пераканайцеся, што ўсе кампаненты наяўныя. Калі якія-небудзь дэталі адсутнічаюць або пашкоджаныя, звярніцеся ў службу падтрымкі кліентаў.

• Chair Backrest (integrated with seat and armrests)
• Газліфтны цыліндр
• Зорная база
• Casters (5x)
• Mounting Hardware (screws, washers, Allen key - typically included)
• Lumbar Massage Cushion with USB Cable

Інструкцыя па зборцы

Follow these steps to assemble your HOMCOM Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Прымацуйце колы да асновы: Устаўце пяць колаў у адтуліны на канцы кожнай ножкі зорчатай асновы. Моцна націсніце, пакуль яны не зафіксуюцца са шчоўкам.
2. Устаўце газавы ліфт: Змесціце газавы ліфт-цыліндр у цэнтральную адтуліну зоркападобнай асновы.
3. Прымацуйце сядзенне да газавага пад'ёмніка: Carefully place the assembled seat (which includes the backrest and armrests) onto the gas lift cylinder. Ensure it is centered and stable.
4. Position Lumbar Massage Cushion: If not pre-attached, position the lumbar massage cushion on the chair back. Connect the USB cable as instructed in the operating section.

Note: Specific screw and component attachment details are typically found in a detailed diagram included with the physical product. This guide provides general steps.

Інструкцыя па эксплуатацыі

Рэгуляванне вышыні

The chair features a gas lift mechanism for easy height adjustment.

Image: Detail of the height adjustment lever.

To adjust the chair height:

• Каб падняць: While seated, lift the lever located under the right side of the seat. The chair will rise. Release the lever at the desired height.
• Каб панізіць: While seated, lift the lever located under the right side of the seat. Apply slight pressure to the seat, and the chair will lower. Release the lever at the desired height.

360° Swivel and Mobility

The chair is designed with a 360-degree swivel function and five multi-directional casters for enhanced mobility.

Image: Detail of the chair's casters and their suitability for different floor types.

The casters are made of PU material, providing smooth and silent movement across various floor types, including hard floors.

Функцыя масажу

The integrated lumbar cushion provides a vibration massage function.

Image: The lumbar massage cushion with its two vibration points.

Каб выкарыстоўваць функцыю масажу:

• Падключэнне сілкавання: Connect the USB cable from the lumbar cushion to a suitable USB power source (e.g., computer USB port, USB wall adapter, power bank).


Малюнак: Exampменш крыніц харчавання USB для функцыі масажу.

• Актывацыя: Locate the control switch on the USB cable. Press the button to turn the vibration massage on or off.

The massage function is designed for relaxation and comfort, providing gentle vibrations to the lumbar area.

Тэхнічнае абслугоўванне

Уборка

The chair features a velvet-look polyester upholstery. For cleaning:

• Ачыстка плям: For minor spills or stains, use a clean, damp cloth with a mild upholstery cleaner. Blot the area gently; do not rub vigorously.
• Рэгулярны догляд: Vacuum the chair regularly with a soft brush attachment to remove dust and debris.
• Пазбягайце рэзкіх хімічных рэчываў: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the fabric.

Агульны догляд

• Праверце злучэнні: Перыядычна правярайце ўсе шрубы і злучэнні, каб пераканацца ў іх зацягнутасці. Пры неабходнасці падцягвайце.
• Абслугоўванне роліка: Трымайце колы чыстымі ад валасоў і смецця, каб забяспечыць плаўны рух.
• захоўванне: Захоўвайце крэсла ў сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Image: Detailed dimensions of the chair.

Гарантыя і падтрымка

For warranty information, technical support, or to order replacement parts, please contact HOMCOM customer service. Refer to your purchase documentation for specific contact details.

Please have your model number (921-298PK) and purchase date available when contacting support.