FITNATE Smart Fingerprint Door Knob Instruction Manual

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your FITNATE Smart Fingerprint Door Knob. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Інфармацыя па бяспецы

• Не спрабуйце разбіраць або рамантаваць замак самастойна. Гэта можа ануляваць гарантыю і прывесці да пашкоджанняў.
• Use only specified batteries (4 x LR6 / 1.5V AA alkaline batteries). Incorrect battery installation can lead to malfunction.
• Keep mechanical keys in a safe place outside the premises.
• Avoid exposing the lock to direct sunlight or rain for prolonged periods.
• Ensure the door is properly aligned and closes smoothly before installation.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

Апісанне малюнка: An image displaying the complete package contents of the FITNATE Smart Fingerprint Door Knob. This includes the main door knob unit with keypad and fingerprint sensor, the interior knob, a latch mechanism, mounting screws, two mechanical keys, and a USB charging cable for emergency power.

• Exterior Door Knob with Keypad and Fingerprint Sensor
• Ручка міжпакаёвых дзвярэй
• Механізм зашчапкі
• Страйк пліты
• Крапежныя шрубы
• Механічныя ключы (2)
• USB Emergency Power Cable
• Шаблон ўстаноўкі

4. Прадукт скончыўсяview

The FITNATE Smart Fingerprint Door Knob offers multiple access methods for enhanced security and convenience.

Апісанне малюнка: A black smart door knob with a digital keypad and fingerprint sensor, shown alongside a smartphone displaying the Tuya app interface and a set of mechanical keys. This illustrates the multiple unlocking methods available.

• Датчык адбіткаў пальцаў: For quick and secure biometric access.
• Клавіятура: For password entry. Features a touchable blue backlight for visibility in low light.
• Механічны ключ: Traditional backup access.
• Кіраванне праграмай Tuya: Bluetooth connectivity for remote management, unlocking, and access record viewінж.

Апісанне малюнка: A diagram showing the dimensions of the FITNATE Smart Fingerprint Door Knob. Key measurements include a knob diameter of 3.15 inches and suitability for door thicknesses between 1.26 to 1.89 inches.

5. Настройка і ўстаноўка

Follow these steps carefully for proper installation. A screwdriver is required.

5.1. Падрыхтуйце дзверы

1. Mark Door: Using the provided template, mark the hole on both sides of the door at the required backset. Then, mark the latch hole on the door edge.
2. Свідраваць адтуліны: Bore a 2.13-inch hole on the door face. Then drill a 0.98-inch hole in the door edge to intersect with the center of the 2.13-inch hole. Заўвага: Drill the 2.13-inch hole from both sides of the door to prevent wood splintering.

5.2. Усталюйце зашчапку і запорную пласціну

1. Усталяваць зашчапку: Insert the latch into the hole and mark a line around the edge of the latch plate. Remove the latch. Chisel approximately 0.12 inches deep or until the latch plate sits flush with the door edge. Re-insert the latch, then drill 0.08 x 0.12-inch holes for mounting screws and fasten the latch.
2. Усталяваць Strike: Close the door and mark the horizontal center of the latch on the door frame. Mark a vertical line where the door edge meets the frame and measure in half of the door thickness to find the vertical center. Extend both lines until they intersect and drill a 0.98-inch hole to 0.59 inches in depth. Position the strike plate and mark around its edge. Chisel the frame to approximately 0.06 inches in depth or until the strike sits flush. Drill 0.08 x 0.12-inch screw holes and fix the strike to the frame.

5.3. Assemble the Lock

1. Install Outside Knob: Правядзіце кабель сілкавання праз зашчапку і правядзіце шпіндзель, пакуль вонкавая ружа не ўстане на адным узроўні.
2. Install Inside Knob: Feed the power cable through the hole in the knob and guide the spindle into the handle. Screw the inside knob to the outside knob using mounting screws.
3. Усталюйце батарэі: Install 4 pieces of LR6 / 1.5V AA alkaline batteries into the battery box. Install the + / - batteries in strict accordance with the arrow shown in the figure. Incorrect battery installation will prevent the product from working and may cause damage.
4. Падключыце кабель сілкавання: Plug the power cord into the power socket. Recycle any excess power cord into the hole. Install the battery cover in the correct orientation and fasten with 2 mounting screws.

5.4. Initial Test

After installation, perform an initial test:

• Input the default password (e.g., 0123#) to prompt a sound and turn the knob to verify that the unlocking mechanism functions normally.

6. Інструкцыя па эксплуатацыі

6.1. Метады разблакоўкі

• Разблакіроўка адбіткам пальца: Place your registered finger on the sensor. The lock will unlock if the fingerprint is recognized.

  Апісанне малюнка: A hand pressing a finger onto the fingerprint sensor of the smart door knob, indicating the biometric unlock feature.

• Разблакіроўка паролем: Enter your registered password on the backlit keypad followed by '#'.

  Апісанне малюнка: A close-up of the smart door knob's digital keypad with a blue backlight, showing the numbers 1-9, 0, *, and #, ready for password input.
• Механічны ключ: Insert the mechanical key into the keyhole and turn to unlock. This is for emergency access.
• Кіраванне праграмай Tuya: Use the Tuya Smart app on your smartphone to unlock the door via Bluetooth.

  Апісанне малюнка: A smartphone displaying the Tuya app interface, showing options for voice control, app unlock, and one-time password generation, alongside images of an Amazon Echo and Echo Dot, indicating smart home integration.

6.2. User Management (via Tuya App)

The Tuya Smart app allows for comprehensive user management:

Апісанне малюнка: An illustration showing the smart door knob installed on a door, with dotted lines connecting it to four different user profiles (George, Paul, Elaine, Susan), indicating the ability to set up multiple user passwords.

• Дадаць адбіткі пальцаў: Follow the in-app instructions to register new fingerprints. The lock can store up to 255 user fingerprints.
• Add Passwords: Create and manage passwords for different users. Maximum length is up to 10 digits.
• Generate Temporary Passcodes: Share temporary access with guests or service providers.
• View Доступ да запісаў: Monitor unlocking and wrong passcode attempts in real-time.

6.3. Аўтаматычная блакіроўка

The electronic door knob features an automatic locking retractor. It will automatically lock approximately 3 seconds after being opened.

7. Тэхнічнае абслугоўванне

• Замена батарэі: When the battery is low, the lock will alarm. Replace all four AA alkaline batteries promptly. Ensure correct polarity.

  Апісанне малюнка: The smart door knob installed on a door, with an icon indicating a low battery alarm and a USB cable for emergency charging. Mechanical keys are also shown as a backup.

• Аварыйнае харчаванне: If batteries die completely, use the provided USB charging cable to temporarily power the lock for access.
• Уборка: Wipe the lock surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For warranty information and technical support, please refer to the product packaging or contact FITNATE customer service directly. Keep your purchase receipt for warranty claims.

Online resources and FAQs may be available on the official FITNATE webсайт.