Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX Master M905 Full Tower PC Chassis. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and longevity of your product.
The GAMEMAX Master M905 is a full tower chassis designed for high airflow and extensive hardware compatibility, supporting E-ATX, ATX, and M-ATX motherboards. It features ample storage options, efficient cooling with pre-installed LED fans, and a user-friendly design for system builders.
Змест пакета
Перад тым, як працягнуць усталёўку, пераканайцеся, што ўсе кампаненты наяўныя:
- GAMEMAX Master M905 Full Tower Chassis
- 3 x 12cm 32 LEDs Blue Cooling Fans (pre-installed)
- Accessory Kit (screws, standoffs, cable ties, etc.)
- Кіраўніцтва карыстальніка (гэты дакумент)
Настройка і ўстаноўка
Follow these steps for initial setup and component installation:
1. Падрыхтоўка шасі
Carefully remove the chassis from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the chassis and sliding the panels backward.

выява: Унутраны view of the GAMEMAX Master M905 chassis with the side panel removed, illustrating the spacious interior and drive bays.
2. Устаноўка мацярынскай платы
Install the I/O shield into the rear opening of the chassis. Align your E-ATX, ATX, or M-ATX motherboard with the pre-installed standoffs. Secure the motherboard using the provided screws from the accessory kit.

выява: Diagram illustrating the internal layout and compatibility for E-ATX/ATX/M-ATX motherboards, maximum VGA card length, and CPU cooler height.
3. Усталёўка блока сілкавання (БС)
The Master M905 features a bottom-mounted PSU design. Install your power supply into the designated compartment at the bottom rear of the chassis. Secure it with screws from the outside rear of the case.

выява: Illustration of the bottom-mounted PSU design, highlighting the hidden compartment and cable management options for a cleaner build.
4. Усталёўка назапашвальніка
The chassis supports multiple storage configurations:
- 5.25" ODDs: Install up to three 5.25" optical disk drives in the front bays.
- 3.5" HDDs / 2.5" SSDs: Utilize the eight 3.5" HDD bays or eight 2.5" SSD bays. Note: Installing longer VGA cards may require removing the middle HDD bracket.

выява: Detailed diagram showcasing the extensive storage capabilities, including 8 HDD bays and 2 SSD positions, along with cable management features.
5. Відэакарта і карты пашырэння
Install your graphics card and other expansion cards into the appropriate PCIe slots on your motherboard. Ensure they are securely fastened. The chassis supports VGA cards up to 450mm in length.
6. Кіраванне кабелем
Utilize the cable routing options behind the motherboard tray to organize and hide cables. This improves airflow and aesthetics.
7. Падключэнне ўваходных/выхадных элементаў пярэдняй панэлі
Connect the front panel cables (USB 3.0, USB 2.0, audio, power, reset, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

выява: Буйны план view of the top panel, showing the USB 3.0, USB 2.0, audio ports, power button, reset button, and fan controller switches.
Інструкцыя па эксплуатацыі
Уключэнне/выключэнне
Press the power button located on the top panel to turn your system on or off. A short press typically initiates power on, while a longer press (usually 4-5 seconds) will force a shutdown.
Кіраванне вентылятарам
The top panel includes a fan controller. Use the switches to adjust the speed of the connected fans, allowing you to balance cooling performance and noise levels according to your preference.
Падключэнне пярэдняй панэлі
Utilize the front panel USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices. The audio jacks provide convenient access for headphones and microphones.
Тэхнічнае абслугоўванне
Regular maintenance helps ensure optimal performance and extends the lifespan of your PC chassis.
Ачыстка пылавога фільтра
The Master M905 features filtered front, top, and base air intakes with pull-out dust filters. Regularly remove and clean these filters to prevent dust buildup inside the chassis, which can impede airflow and component cooling.

выява: Ззаду і знізу view of the chassis, highlighting the easily accessible, pull-out dust filters for convenient cleaning.
Ўборка салона
Periodically open the side panels and use compressed air to remove dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.
Ліквідацыю непаладак
If you encounter issues with your chassis, refer to the following common problems and solutions:
- Сістэма не ўключаецца:
- Ensure the power supply is properly connected to the wall outlet and the motherboard.
- Verify all front panel power switch cables are correctly connected to the motherboard headers.
- Check if the power supply unit (PSU) switch is in the "ON" position.
- Fans are not spinning or LEDs are off:
- Confirm fan power cables are securely connected to the motherboard or fan controller.
- Check the fan controller settings on the top panel.
- Ensure LED power cables are connected if applicable.
- Front panel USB/Audio ports not working:
- Verify that the front panel USB and audio cables are correctly connected to the corresponding headers on your motherboard.
- Check your motherboard's BIOS/UEFI settings to ensure USB/audio ports are enabled.
- Excessive dust buildup:
- Regularly clean the pull-out dust filters as described in the Maintenance section.
- Ensure proper airflow direction with intake and exhaust fans.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Назва мадэлі | Майстар М905 |
| Марка | ГАМЕМАКС |
| Тып корпуса | Поўная вежа |
| Сумяшчальнасць матчыных поплаткаў | E-ATX, ATX, M-ATX |
| Памеры (ДхШхВ) | 20.16 х 8.26 х 20.75 цалі (512 х 210 х 527 мм) |
| Вага прадмета | 23.4 фунта (10.6 кг) |
| Матэрыял | Легаваная сталь |
| Колер | Чорны |
| 5.25-цалевыя адсекі для дыскаў | 3 |
| 3.5" HDD Bays | 8 |
| 2.5" SSD Bays | 8 |
| Пярэднія парты I / O | 2 x USB 3.0, 2 x USB 2.0, HD Audio (Mic/Headphone), Fan Controller |
| Папярэдне ўсталяваныя вентылятары | 3 x 12cm 32 LEDs Blue Fans (Front) |
| Максімальная даўжыня карты VGA | 450 мм |
| Максімальная вышыня працэсарнага кулера | 170 мм |
| Тып мацавання блока харчавання | Rear Mount (Bottom) |
| Спосаб астуджэння | Air, Water (supports 240/280/360mm radiators) |

выява: A diagram illustrating the key dimensions of the GAMEMAX Master M905 chassis.
Гарантыя і падтрымка
GAMEMAX products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official GAMEMAX webсайт або звярніцеся да мясцовага прадаўца.
Каб атрымаць дадатковую дапамогу, наведайце GAMEMAX Store on Amazon or consult the manufacturer's official support channels.