Уводзіны
The Sena Spider ST1 is a Mesh-equipped communication headset designed for motorcyclists, featuring a glove-friendly jog-dial control. It operates on Sena’s Mesh intercom platform, providing robust and reliable rider-to-rider communication. This system includes HD Speakers for enhanced audio quality and is compatible with the Sena Motorcycle App for easy configuration.
Асноўныя характарыстыкі:
- Mesh Intercom communication through a single-button press, with an effective range of up to 5 miles / 8 km.
- Multi-Channel Open Mesh allows communication with a near-limitless number of riders and lets you switch between 9 channels.
- Group Mesh supports up to 24 participants in a private group.
- Upgraded HD Speakers optimized for audio quality, delivering a boost in volume, bass, and clarity.
- Bluetooth 5.1 connectivity to your smartphone for access to music, phone calls, and GPS navigation.
Што ў скрынцы
The Sena Spider ST1 Dual Pack includes the following components:
- 2 x Sena Spider ST1 Communication Devices
- 2 x Speaker Sets (HD Speakers)
- 2 правадных мікрафона
- 2 x Boom Microphones
- 2 х Універсальны шлем Clamps
- 2 х клейкія мацаванні
- 2 х USB-кабеляў для зарадкі
- Various Velcro pads and foam covers for microphones and speakers
Image: All components included in the Sena Spider ST1 Dual Pack, showing the main units, speakers, microphones, and mounting hardware.
Настройка
Proper installation ensures optimal performance and comfort. The Sena Spider ST1 offers flexible mounting options to suit various helmet types.
1. Choosing a Mount:
You have two primary options for mounting the main unit to your helmet:
- Clamp Мацаванне: This mount slides between the helmet shell and the inner padding. It is generally recommended for helmets with a suitable gap.
- Клейкае мацаванне: This mount uses strong 3M adhesive to attach directly to the exterior of your helmet. It is suitable for helmets where the clamp mount may not fit securely or for users who prefer a more permanent attachment.
Ensure the chosen mounting location is flat and clean before applying the adhesive mount.
2. Speaker Installation:
The HD speakers attach to the inside of your helmet using Velcro pads. Identify the ear pockets within your helmet's padding. Clean the area, apply the Velcro pads, and then firmly press the speakers onto the pads. Ensure the speakers are positioned directly over your ears for the best audio experience.
3. Microphone Selection and Placement:
Choose the microphone type that best suits your helmet:
- Мікрафон-штамб: Ideal for open-face or modular helmets, this microphone extends on a flexible arm. Position it approximately 1-2 cm (0.4-0.8 inches) in front of your mouth.
- Правадной мікрафон: Best for full-face helmets, this microphone is smaller and can be discreetly placed inside the helmet's chin bar area using adhesive.
Connect the chosen microphone to the main unit's base. Use the provided microphone sponges to reduce wind noise.
4. Кіраванне кабелем:
Carefully route all speaker and microphone cables underneath the helmet's padding to prevent discomfort and ensure a tidy installation. Use the provided cable clips or adhesive strips to secure loose wires.
Image: Sena Spider ST1 unit securely mounted on the side of a motorcycle helmet, demonstrating typical installation.
Інструкцыя па эксплуатацыі
1. Уключэнне/выключэнне харчавання:
- Уключэнне: Press and hold the Jog Dial and Phone Button simultaneously for 1 second.
- Выключэнне: Press and hold the Jog Dial and Phone Button simultaneously for 5 seconds.
2. Рэгулятар гучнасці:
Павярніце Jog Dial па гадзіннікавай стрэлцы, каб павялічыць гучнасць, і супраць гадзіннікавай стрэлкі, каб паменшыць гучнасць.
3. Phone Pairing:
To pair your Sena Spider ST1 with your smartphone:
- With the unit off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
- On your smartphone, go to Bluetooth settings and select